Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs
(3839 reviews)
Price: $25.54
In Stock
Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs
Our Price: $25.54
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meCustomers prefer these similar products
24% prefer this
- All Info
- Reviews (3839)
- Q & A (0)
- Photos
CURT Trailer Hitch Ball Mount
- Fits 2 Inch Hitch
- Fixed Ball Mount
- Drop - 2 Inch
- Rise - 1 Inch
- No Ball
- 7500 lbs GTW
- Class III
- CURT
- Steel Shank - Gloss Black
- 1 Inch Ball Hole Diameter
Corrosion-resistant, black powder coated ball mount measures 7-5/8" from center of hitch pin hole to center of ball hole. Use it in either the drop or the rise position to fit your application. Hitch pin and clip sold separately.
Features:
- Ball mount lets you hook up your trailer to your tow vehicle
- Shank slides into your vehicle's hitch receiver
- Ball platform provides mounting point for hitch ball (sold separately)
- Both drop and rise positions available to ensure level towing
- Sturdy steel construction
- Corrosion-resistant, high-gloss black powder coat finish
- Hitch pin and clip or hitch lock sold separately
- Assembled in the USA
Specs:
- Application: 2" x 2" trailer hitch receivers
- Gross towing weight: 7,500 lbs
- Tongue weight: 750 lbs
- Length: 7-5/8" from center of hitch pin hole to center of ball hole
- Rise: 1" from top of inside of hitch opening
- Drop: 2-1/4" from top of inside of hitch opening
- Ball hole diameter: 1"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
45030 Curt Class 3 Ball Mount - Standard Duty 2" Square Ball Mount - 1" Rise, 2-1/4" Drop
Item # C45030
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
- Did not fit
Customer Reviews
Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs - C45030
Average Customer Rating: 4.9 out of 5 stars (3839 Customer Reviews)
Corrosion-resistant, black powder coated ball mount measures 7-5/8" from center of hitch pin hole to center of ball hole. Use it in either the drop or the rise position to fit your application. Hitch pin and clip sold separately.by: Eric07/06/2023
Just your basic ball mount, the product is just like most 2” Hitch ball mounts, the service wasn’t very good though.
Ordered on June 15th (product was in stock) took them 6 days to send it out, took another 6 days in shipping and got all the way to my post office two days before leaving on vacation (I needed it for the vacation) and the post office said “box was empty and they notified seller” etrailer sent a new one (got here a week after my vacation) in a damaged box (packaging is horrible, little bit of paper in a box with a 5 lbs ball mount) almost lost this one too.
I don’t believe I’ll be using etrailer in the future (had issues before)
by: Thomas06/30/2023
Looks & works great. Easy to install. Make sure you order or have a locking pin and ball to go with it.
by: David P09/16/2015
Does the job, however there's a lot of play when hitch mount is inserted into the hitch and when towing with an empty trailer. Very loud. Have to buy a silencer that goes around and secures the product.
by: Debi10/03/2023
This is a great all-purpose hitch. I've used it to mount a heavy-duty bike rack and a steel T-rack to carry a canoe as well as lumber. Most recently I hauled 5 x 8 cargo trailers full of plants, then furniture for a 600-mile move. It was simple to use, problem free, very strong and sturdy. Now that I live on some acreage, I see a trailer in my future, so this will get a lot more use. I drive a 2013 Tacoma, so this is a good size hitch at a good price with sufficient capacity for my needs. I do use a key lock for the hitch as well.
by: Mike10/03/2023
Ordered the whole trailer hitch package but did not include the pin for the ball mount. CHEAP and will never order from you again
by: Roy 11/09/2021
The product was going to come in late but etrailer offered a more expensive hitch substitute for the product I ordered. I was completely satisfied with the service, communication and product. This is the second time I purchased from etrailer.
Roy
11/10/2022
fine
by: Pam D04/30/2015
I know absolutely nothing about hitches! I checked prices and products in my area and was dissatisfied with high prises and confusion over which product would be best for my vehicle. I did an extensive search on the internet and found etrailer.com. I called and talked to Jonathan. He walked me thru the entire order process and explained details about the products. I placed my order and received it in time frame I asked for. My local Toyota dealer installed the hitch without any problems! I am totally satisfied with the pricing, product and customer service. I highly recommend etrailer.com!!!
by: SteveW09/17/2023
Instalation was pretty quick and easy, the completed installation worked great on my new trailer.
by: John06/03/2019
It's a ball mount. Feels substantial and well made. Paint looks good, nice looking welding. Can't say anything bad. I understand that the hitch balls come in different sizes and types, but it would have been nice to get a simple hitch pin and clip when buying the hitch and ball mount together, as I was expecting that to be included with one or the other.
John
6/4/2020
Year later, still works fine. Still think it should have included a hitch pin and clip.
by: Stephen07/24/2023
I'm assuming I have to buy the pin separately, but this wasn't pointed out to me, so when I got ready to use this I had to stop and get a pin.
by: Jason 02/11/2024
Good product. Just as one should expect.
by: Jeepster Dale09/24/2018
This hitch is perfect for my needs. Great, quality products, from a knowledgeable source, offering competitive prices. Also, the brief video assist eased my installation efforts.
by: Daniel 01/05/2024
Continues to withstand the workload.
by: Kiwi Pierre12/19/2023
Slips right into the hitch and works pe rfectly!
by: Luther 07/09/2023
This fits my 2" hitch just as advertised. Fit and finish is perfect.
by: Rick D10/29/2016
Great product! Easy install. Completed project myself in 1.5 hours...would recommend for any skill level...just gotta be willing to crawl around on your back
by: Chad 12/27/2023
Very good!
by: Mike W.07/15/2020
I seldom take the time to write a review but I felt compelled to share my excellent overall experience with etrailer.com. I ordered the C13200 trailer hitch receiver, 2" ball, 2" ball mount receiver, pin/clip, and C56217 wiring harness for my 2017 Toyota Highlander XLE. All arrived in no time and in excellent condition. The installation videos and PDF documents are outstanding. I installed the hitch receiver in roughly 45 minutes - includes time to convince brother in-law to come over to help hoist it into place. Wiring harness installation was a breeze, roughly 20 minutes (again, great instructional videos). I could not be happier with the finished product. Thanks etrailer.com for making this a trouble free installation. If you are considering adding a hitch, etc. go no further, you are at the right place...order away. Its very easy to install and you will save a trailer load of cash!!!
by: 60 yr old female10/27/2016
Curt Ball Mount for 2'' Hitches-C45030
Curt T Connector Vehicle Wiring Harness w/ 4 pole flat trailer connector-C56225
Curt Trailer Hitch Receiver Class 3 2''-13241
Website easy to use. PayPal available (the main factor).
Fast shipping. Well packaged. All 3 items installed within minutes.
Amazing experience with etrailer!!
Will definitely return to do business.
Thanks!!
60 F.
10/27/2017
We are more than pleased with your products and the transaction. Thanks again!
by: Nancy 11/20/2022
It took a while before my son had time to install the trailer package. Took some watching of [online] videos but he got it installed and it works great. We’ve used it a couple of times to pull a small trailer.
by: Pelle02/08/2023
Package arrived fast with a few rips in the cardboard box surrounding it. Nothing was missing or damaged so it was not an issue. Took about 30 minutes to install and turned out great. Another 15 for the electrical connection and it was all done. Price is right.
by: Dean D06/27/2015
The video and the written instructions for installing the hitch were very helpful for a novice like me. In the process I saw that there was a good reason for every tool listed for installing it. The hitch fits perfectly and looks very sturdy. Now we can't wait to be able to take our bicycles with us when we go to the mountains from Denver, letting us enjoy all the biking trails. Also the hitch arrived only 3 days after ordering it - great!
Dean D.
6/26/2016
Great -no problems and very convenient.
by: Glenn M08/24/2015
Ordered a complete hitch package for my GMC Terrain. Every piece was included and all of it was top notch quality. The fit was perfect and installation was a breeze. The wiring harness matched up perfectly with the OEM plugs, no splicing or crimping required. I highly recommend this company and its products.
Glenn M.
8/23/2016
The hitch has performed perfectly. Im a very satisfied customer.
25
3813
Show More Reviews
See what our Experts say about this CURT Trailer Hitch Ball Mount
- Best Ball Mount for 2005 Honda Pilot with a Curt Trailer Hitch ReceiverAll three ball mounts will fit into the Curt Trailer Hitch Receiver that you mentioned. The next thing you need to do to make sure that the trailer will pull properly behind your 2005 Honda Pilot is to measure the hitch and coupler height and to determine the correct rise or drop for your trailer. The reason you need to find all of this out is so that you can ensure that you are keeping the trailer level while towing it. To determine the hitch height you need to make sure that your Honda...
view full answer... - Origin Of Curt Fusion Ball MountThe Curt Fusion Ball Mount for 2 inch Hitches - 1-7/8 inch Ball - 2 inch Drop - 5,000 pounds # C45131 is made in china. most hitch balls and pins are made in China. The Curt Ball Mount for 2 inch Hitches - 1 inch Rise, 2-1/4 inch Drop - 7-5/8 inch Long - 7,500 pounds # C45030 is made in the USA but it's only the ball mount. You would still need The Convert-A-Ball Interchangeable Ball Set - 2 inch and 2-5/16 inch Balls - 1 inch Shank - Nickel # 904b and The Hitch Pin # C21500. I attached...
view full answer... - Recommended Way to Measure Trailer Coupler Height for the Proper Ball Mount RiseIt will not matter if your trailer is loaded or unloaded when measuring, you will just want the trailer to be level when measuring for the proper rise or drop ball mount. The trailer jack will be supporting the trailer and holding it level regardless of the trailer's load. The travel in the trailer's suspension will not have a significant impact on the trailer's coupler height. For your convenience I have linked to this page for your reference a Help Article on ball mounts.
view full answer... - Trailer Hitch and Towing Equipment Recommendation for 2012 Land Rover Ranger Rover Sport HSEFor a trailer hitch, I'd recommend the Curt Class III, part # 13456. The # C13128 hitch you'd looked at is for the Land Rover Evoque, and wouldn't fit your Range Rover Sport. Please note, if your Range Rover Sport has the full-sized spare tire, it will no longer fit under the vehicle once the hitch is installed. For a trailer wiring harness, I'd recommend the # C59496. For a ball mount, use # C45030 and # 19260 for a 1-7/8 or # 63845 for a 2 inch trailer ball. You will also need a pin...
view full answer... - Is it Possible to Tow With 1-5/8The best solution for you is going to be simply replacing that hitch with a new one, the Curt # 13657, which is a fit for '92 YJ's with the exception of Renegade models. The Curt is a Class III hitch that has a towing capacity of 3,500 lbs, tongue weight capacity of 350 lbs, and more importantly, a 2" receiver opening. To complete your towing setup you would want a 4-flat trailer connector # 118356, ball mount # C45030, 2" hitch ball # 63845 and pin and clip # C21500. I've added links...
view full answer...
- Trailer Hitch and Towing Accessories Recommended for 2011 Kia Sportage SX Turbo ModelHidden Hitch, Draw-Tite and Curt now make hitches that are compatible with the SX turbo model, although that wasn't always the case. I'd recommend the Curt Class III hitch, part # C13120 because it has the highest tongue weight capacity at 525 lbs and is the least expensive option. Curt makes a high quality product, so the fact that you'll save a dollar or three won't mean you have to compromise anything. If you'll be towing with the hitch, you'll also need the following accessories: Trailer...
view full answer... - Will a Curt Multi-Fit Trailer Hitch 13950 Fit a 1997 Honda CR-VCurt multi-fit trailer hitch 13950 is designed to fit certain frame widths. Measure the center to center distance from one frame rail to the other. If the distance is 31 to 41 inches then it is possible this hitch will fit your 1997 Honda CR-V. However, it has not been tested so I cannot guarantee that it will fit. It is also not listed in the vehicle fits in the instructions which I have linked for you. If you go with this hitch then you will need to replace the mounting hardware since...
view full answer... - How to Select Correct Ball Mount and Hitch Ball for 2017 Porsche MacanIf you are installing the Curt Trailer Hitch # C13136 or the Draw-Tite Trailer Hitch # 75940 on your 2017 Porsche Macan and plan on towing, you will need to take some very simple measurements in order to find out the correct ball mount. First, make sure both your Porsche and trailer are parked on level ground; you'll then want to measure from the ground to the top of the inside of your hitch receiver. Next, measure from the ground to the bottom of your trailer's coupler and find the difference...
view full answer...
- Recommended Class III Trailer Hitch for 2006 Subaru Outback Wagon with Best Fit to Rear BumperDraw-Tite offers a Class III Trailer Hitch Receiver for your 2006 Subaru Outback Wagon, part # 75560e. If you look at the provided photo, you can see how the hitch appears below the bumper fascia. If you'll be using the hitch for towing, you'll also need the following to complete your towing system. Trailer Wiring Harness with 4-pole trailer connector, part # 118461 Ball Mount, part # C45030 Trailer Ball, # 63845 for a 2 inch, or 19260 for a 1-7/8 inch Locking Hitch Pin, part # e98882 To...
view full answer...
- Ball Mount to Tow a Jayco Trailer with Coupler 16 Inches From Ground with a 2012 Audi Q7We have yet to install Curt trailer hitch # 13220 on a 2012 Audi Q7 but on another vehicle that uses this same hitch it measured 18-1/2 inches from the ground to the top of the receiver opening. In that case you would use a ball mount with a 2-1/2 inch drop, or as close to that as possible, for a level coupler height of 16 inches. The tongue weight of the trailer will pull down some at the ball so I recommend a ball mount with a 2 inch drop such as # D-4, Hitch Pin and Clip, # PC3, or...
view full answer... - Trailer Wiring Harness and Other Parts Needed to Tow a Pop Up Camper with a 2008 Toyota HighlanderIf all you need are the four lighting functions you can use # 118449 on your 2008 Toyota Highlander. Then connect it to your trailer's 7-way connector using the adapter # 30717. To make it easier to mount the connector on your Highlander use the mounting bracket # 18138 along with the no drill mount # C57202. This way the 7-way adapter will have a clean look on the rear of the vehicle without having to drill into it. If you don't already have a hitch receiver I suggest the Draw-Tite...
view full answer... - Will Curt Class III Trailer Hitch 13245 Fit a 2009 Jeep Liberty With Spare TireYes, Curt hitch # 13245 is designed to fit around the under vehicle spare tire on 2009 Jeep Liberty 4x4 models. The installation is very straight forward as well, as you can see at the link to the installation instructions I have provided. If you need to wire your vehicle for towing, you can use custom fit wiring harness # 118554, which would also be a simple install for you. The recommended ball mount for your vehicle is part # C45030, which you could secure using a hitch pin like...
view full answer... - Will Curt Trailer Hitch, # 13044, For The 2006 Jeep Liberty Fit Renegade Model With Fuel Tank ShieldThe Curt Trailer Hitch for the 2006 Jeep Liberty, # 13044, will fit on your 2006 Jeep Liberty Renegade with the fuel tank skid shield. The fuel tank skid shield will need to be temporarily removed or loosened for installation. The tow hooks do have to be removed. Our notes on that hitch showed those instructions, but I also called our supplier (Curt) and they did verify those notes. I am sending a video link of this hitch being put on a Jeep Liberty with the skid shield and it will show...
view full answer... - Complete Curt Towing Package For A 2015 Hyundai Santa Fe GLSI do have a trailer hitch receiver for you but unfortunately, the Curt Trailer Hitch Receiver part # C13152 is only a confirmed fit for the 2015 Hyundai Santa Fe Sport, not the 2015 Hyundai Santa Fe GLS. For a trailer hitch receiver that is compatible with the GLS, you have two options to choose from. You can either go with the Curt Class III Receiver Hitch part # C13153 or the Draw-Tite Class III Max Frame Round Tube Receiver Hitch part # 75776. I recommend going with the Curt Class III...
view full answer... - Complete Towing Package For A 2010 Nissan XterraI do have trailer hitch receiver options that will work for your 2010 Nissan Xterra however, none of the trailer hitch receivers that are a confirmed fit for your 2004 Nissan Xterra will also fit the 2010 Nissan Xterra. For a trailer hitch receiver that is compatible with a 2010 Nissan Xterra, I recommend using the Curt Trailer Hitch Receiver part # 13514 over the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75291 as the Curt Trailer Hitch Receiver is rated for a high capacity in...
view full answer... - Custom-Fit 2-Inch Trailer Hitch Availability for 2015 Jeep Renegade LatitudeBoth 1-1/4-inch Class II and 2-inch Class III custom-fit hitches are offered for your 2015 Jeep Renegade Latitude. All can be seen on the included link. Curt Class III hitch # C13269 fits all Renegade models. This hitch includes all hardware and installs without drilling. We have not had a chance to video an install on the 2015 Renegade. If you plan to tow use ball mount part # C45030 and for a wiring harness you can use # C56274. For a hitch ball use either 2-inch ball # 63845 or 2-5/16-inch...
view full answer... - Recommended Replacement Hitch Installation Hardware for Curt Class III Hitch # 13424We can help you with new hitch installation hardware for your Curt hitch # 13424. It is important to always use new hardware when re-installing a hitch since the fasteners are single-use types that cannot be removed and re-installed. All you need to do is enter part # RHK into our search box and then enter your hitch number 13424 in the box provided and then select Curt from the manufacturer drop-down menu bar. We will then send you all of the appropriate fasteners in the correct grade...
view full answer... - Recommended Trailer Hitch and Related Items for Towing with 2008 Nissan Xterra XWe offer several choices in a 2-inch Class III hitch for your 2008 Nissan Xterra X and you can see these by clicking on the link provided. I recommend the Curt # 13514 because it has the highest tongue weight capacity (400-lbs) AND has the lowest cost too. You will want to check your owner's manual for confirmation of the vehicle's tongue weight capacity. You'll also need a wiring harness for your trailer's lights. Use part # C56225 if you do not have the factory tow package or part #...
view full answer... - Hitch, Ball Mount, Wiring and Bike Rack Recommendation for a 2010 Toyota RAV4Your 2010 Toyota RAV4 can be fitted with 2 different sizes/classes of trailer hitch, either 1-1/4-inch Class II or a 2-inch Class III. All options are shown on the linked page. I suggest you go for the 2-inch hitch since it offers a higher weight capacity and better compatibility with a range of hitch-mount products like bike and cargo carriers. Curt hitch # C13149 is my recommendation for these reasons and because it is the lowest-cost option in a Class III hitch. Please refer to the linked...
view full answer... - Hitch Ball Reducer Sleeve for Ram 2500 PickupIt sounds like you need a spacer for your hitch ball. If your ball has a 1-inch shank and the ball mount has a 1-1/4-inch opening, use Reese part # RP80106 or Curt part # F-2.
view full answer... - Adding a 7 Way Wiring Harness to a 2011 Nissan FrontierThe Tekonsha # 118266 will definitely fit a 2011 Nissan Frontier without issue. It includes all parts to get the 7 Way up and running. You will, however, need a few parts to get it attached to the hitch. The No Drill bracket # 18136 attaches to the cross bar of the hitch via a hose clamp, making it easy to get installed. The 7 Way bracket # PK12711U will then bolt to the # 18136. The 7 Way plug from the # 118266 will then bolt right onto the # PK12711U. The etrailer.com Class III Hitch...
view full answer... - Is Curt Class III 13138 Receiver Hitch Compatible- 2001 Ford Ranger w/Step Side BedAccording to my Curt representative, there aren't any fit exclusions for the # 13138 Class III hitch on the 2001 Ford Ranger. The hitch fits all Ranger models from the 2001 model year, including yours with a stepside bed. Additionally, I've looked through our customer reviews of this product, and haven't found any fit issues with stepside beds. The hitch will fit perfectly for you. To complete your towing system, you'll also need a trailer wiring harness, a ball mount and a trailer ball....
view full answer... - Which Trailer Hitch Is Recommended For 2008 Mazda CX 9The Draw-Tite and Curt are top quality hitches as far as strength. As far as fitment on the vehicles, most manufacturers today try to make the hitch as least unobtrusive as possible when designing around the vehicle design. When we recommend hitches we usually try to take into consideration how it looks on the vehicle. Like the hitch does not hang too low or that it does not stick too far out from the rear fascia. Also if the installation is easy to do or if it requires modifications. On...
view full answer... - Trailer Hitch and Wiring for a 2014 Mercedes GLK 250 BluetecFirst, for a trailer hitch that fits your 2014 Mercedes GLK 250 BlueTec there is one option; Curt trailer hitch # C13155. And for a trailer wiring harness I recommend # C59236 since it is designed to work with 2 or 3 wire electrical systems and PWM (pulse width modulation) systems so pretty much all scenarios are covered. A trusted mechanic or RV dealer with a service center could perform the installation for you. When using the hitch for towing you can use ball mount # C45030. For a...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Lindsey S
Video Edited:
Jacob T
Video by:
Dustin K
Video by:
Amber S
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Isabelle B
Test Fit:
Michael H
Installed by:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David P.
9/21/2016
So far so good - thx for checking