Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks
(145 reviews)
Price: $22.50
In Stock
Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks
Item # S64027
Retail:$51.09
Our Price: $22.50
You Save: 56%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (145)
- Q & A (0)
- Photos
Swagman Trailer Hitch Lock - S64027
- Fits 2 Inch Hitch
- Rack Specific Locks
- Keyed Unique
- 4-1/2 Inch Span
- Chrome
- Swagman
- For Swagman Racks
- Threaded Pin
If you have a Swagman bike rack with the threaded shank, this is the lock you want! This lock is designed specifically for Swagman racks to prevent theft and the somewhat annoying sway that you might experience from time to time towing your rack.
Features:
- Secures 2" Swagman rack with anti-wobble shank inside a receiver tube
- Anti-wobble technology pulls the receiver bar tight to one side of the hitch and helps eliminate rattling
- Helps protect racks from theft
- Tubular high-security keys allow easy access with only a quarter turn to unlock
- Triple chrome-plated for maximum rust protection
- 2 Keys included
Specs:
- Application: 2" x 2" trailer hitch receivers
- Also fits wide factory 2" Toyota hitch receivers
- Overall length: 7-1/8"
- Usable length: 4-1/2"
- Length of threaded portion: 1-3/4"
- Length of non-threaded portion: 2-3/4"
- Pin diameter: 5/8"
- Limited lifetime warranty
Fits:
- All Swagman 2" hitch bike racks: S63381, S64400, S64152-2, S64663, S64665, S64675, S64693, S64698, S64698-99, S64940, S64970, S36FR, S44FR, S64FR, and S94FR
Using anti-wobble technology, the threaded pin pulls the Swagman hitch rack shank to one side of the hitch receiver, preventing movement during travel. Tubular high-security keys allow easy access with only a quarter turn to unlock. It is also triple chrome-plated for maximum rust protection.
64027 Swagman 5/8" Locking Anti-Wobble, Threaded Hitch Pin for 2" Receiver
Replaces 2001
Customer Satisfaction Score:
87% were satisfied with this product
13% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks - S64027
Average Customer Rating: 4.7 out of 5 stars (145 Customer Reviews)
If you have a Swagman bike rack with the threaded shank, this is the lock you want! This lock is designed specifically for Swagman racks to prevent theft and the somewhat annoying sway that you might experience from time to time towing your rack.
by: Rick05/22/2024
I had a mix up and ordered the wrong pin, which was the one suggested by the web sit. When I got it in it was the wrong size. Eric at etrailer got me the right one sent out immediately and a return ticket for the incorrect pin. Couldn’t be happier with the service and the quality of the item.
by: Cowboy Bill05/03/2011
A must have for the Swagman XTC-4 bike rack. Sure, I want to protect my bikes but I needed something that would protect my $200+ bike rack, too. You need a wrench to tighten the bolt, which does a good job of keeping the rack from rattling but is a pain because you always need to have a wrench around. But that's not the fault of the lock. The lock is pretty neat in that you can rotate the key hole so it's covered up to keep mud and weather out. I'd buy it again if needed and the price here at etrailer.com was good.
by: John M.05/09/2020
Great product. Fit bike rack / trailer hitch just as stated. So glad I found it online.
by: Mark06/12/2023
The product did not come with instructions. The videos at the manufacturer's site gave no instructions on installation. A video from a competitor explained how to install it. It can only be installed from the right side, that is the passenger side. A left-handed person, such as me, will naturally insert it from the left side. I did that repeatedly and of course it failed. Yes, I realize the world is right handed but a simple sentence saying it must be inserted from the right and not the left wouldn't take that much effort by the company. The same complaint applies to the bicycle rack itself.
by: richard10/30/2021
Installed both items within 15 minutes and am quite pleased with the results. A thunderstorm rolled through, as evidenced by the pictures, so I was unable to utilize the rack. I plan on riding the Ghost Town Trail tomorrow along with a friend. I rate these items with Five Stars !
by: Michael09/21/2022
The replacement lock has worked well. The original lock that came with the bike rack failed because the chrome plating came off the bolt and stripped out the threads when removing the hitch pin. I did add curt anti rattle hitch clamp.
by: Liz01/21/2014
Just received lock. Works great with the Swagman standup bike rack
with the 2" receiver. This lock was specifically recommended to me by
Swagman and is design for their 2" receiver.
by: landscape09/19/2015
solid bolt and lock assembly arrived early, well pkg'd. Exactly as advertised and the short video also helpful since original swagman bolt slightly different (uses cotter-pin instead of lock). Suggest to use a bit of grease for first time use. Locking washer added bonus. Key assembly smart design with default with having key stay with lock when lock is not on bolt.
Landscape
9/18/2016
fine except plastic cover to key fell off, not easy to put back on, does not affect functionality, may eventually corrode?
by: Rick C.03/22/2012
Extremely difficult to align pin in receiver such that you can screw in the hitch pin. Besides-an identical one COMES WITH A SWAGMAN RACK SO DON'T WASTE YOUR MONEY ON A SECOND ONE! etrailer.com recommends this as an accessory, but is COMPLETELY UNNECESSARY! etrailer.com will also charge you for return shipping! What a ripoff!
Patrick B.
11/21/2012
The lock is listed in the Replacement Parts section on the product page. That way if an XTC4 owner loses a lock, they can come back to the product page and quickly find a link to the replacement lock.We list what is include with each rack in the product description.
by: David02/19/2022
No fault to The lock it looks to be a good product but it is a 5/8" bolt and the swingman xc2 bike rack it was associated with takes a 1/2" bolt. I'm more disappointed with the sight linking these items together making it look like it will work together. Looking back at the rack details it does not have any notes saying it takes a 1/2" bolt so how would I know? Now I have to return the lock because I have no use for it.
by: Ray M03/31/2012
This came taped to my hitch in the blister pack. It screwed into the receiver and hitch extension very smoothly and holds the extension tight to prevent rattles. Good product.
Larry B.
11/18/2013
I lost my keys for my swagman lock . How do I get a replacement?
by: Karl 06/03/2021
This product works just as advertised. It fit my bike rack perfectly and is easy to use. Of course it is brand new, but I have no reason to think it will not last for many years.
Karl
6/5/2022
Great question. We don’t use the rack a lot, but it still is working like new after a year. More companies should seek feedback long term. After all, isn’t that the measure of a quality product?
by: Peter W11/07/2016
Hitch goes on and off easily.
We have it on our RV and our bikes don't even quiver as we go down the road.
Lock is nice too.
Peter W.
11/15/2017
One year later and still working great!
by: Ray09/06/2011
I received the Locking, Threaded Hitch Pin and installed it without any problems. The Swagman Bike Rack I purchased earlier came with the Anti-Rattle Threaded Hitch Pin, but without the Lock. The Swagman company rep that I spoke to said that the lock wasn't necessary, but it gave me peace of mind to have a lock on the Threaded Hitch Pin to prevent it from being jarred loose. Also, it makes it more theft resistant. I would rather have saved the money and gotten the locking mechanism without the threaded hitch pin, since I had this already piece, but it might be beneficial for some people.
The lock itself seems to work well. It goes on without the key; you just need to push it on. The key is required to remove it.
The threaded hitch pin does keep the bike rack from wobbling around. I tried to use a regular hitch pin, but that didn't work well at all since the 2" hitch seems smaller than my 2" receiver, so there is a lot of play in it. But with the threaded hitch pin it seems to work well. The one catch is that you need a wrench or socket set to install it or to uninstall it.
Overall, I am very happy with my purchase. I think that Swagman should include this with their racks, though. Also, it would be nice if the key for the lock used the same key as the bike rack so that you wouldn't need two separate keys.
Overall, I am very happy with my purchase. I think that Swagman should include this with their racks, though. Also, it would be nice if the key for the lock used the same key as the bike rack so that you wouldn't need two separate keys.
" />
by: Robert S09/02/2017
This lock is the best, it works just as the ad says, it fits perfect and you feel your bike rack will be there when you come back and no noise when driving so I would say this lock is well worth the investment, thanks again etrailer RS
by: Carl11/01/2018
Lisa in Customer Service was so very helpful. She noticed that in my Swagman bike rack review I needed a locking hitch pin and pointed me in the correct direction with the correct Swagman pin on E-trailer. I tried, like most, to purchase a cheap lookalike at my local hardware/superstore store. Had to take it back and contacted Lisa to send me the correct part. She did so at a very reasonable shipping cost.
Very happy with the Swagman hitch pin and the bike rack!!
Second somewhat large purchase from E-Trailer and both have been good quality and great service.
Thank you Lisa!
by: Diane G.05/30/2017
Already purchased one several years ago for our Swagman bike rack to lock it on our SUV trailer hitch, so I bought another one to have on hand in our RV.
by: Donna T06/25/2016
Locking anti-rattle, threaded hitch pin was the correct item to buy. We heard no rattle while driving and stopped twice in our 4 hour trip to check the bikes. Everything was just as tight and sturdy as when we started our trip. Highly recommend this product.
by: Mark 03/10/2021
Love the locking mechanism for my bike rack! I have been holding off on bringing my bikes on trailer trips for fear of theft, but this will do the trick perfectly. Once again, e-trailer has come through with a terrific product managed by the best customer service staff around.
by: Jim C09/10/2016
I received this product in just a few days. It was exactly what I was looking for. I have a Swagman Bike Rack which uses a screw tightening hitch pin. In order to deter theft of my bike rack this specific hitch pin has a locking feature. The products appears to a good fit and good design. I hope to have years of use.
by: Steven06/05/2019
Fast easy order delivery and fantastic follow up. Etrailor are real pros!
Steven
6/8/2020
Hitch is little small causes rack movement. Collapsible bar also too loose both cause bike wobbling. I secure the bike handle bar with tight bungee cords to my SUV roof rails.
by: Ian07/03/2013
Just mounted on my camper, seems solid. A bit odd that the lock piece does not mount tight to the hitch it is just a lock NOT a retainer although the threads seem to take care of that....I may add a hole for a pin.
by: Bill S.08/24/2018
This bike carrier lock by Swagman is ideal. Chrome plated to resist rusting is very nice. The way the lock works is also outstanding, provides a nice cover over the key hole to keep the elements out.
This lock replaces the exact original one that came with my Swagman carrier that I lost by my own stupidity.
Etrailer.com is great to work with for all your RV needs FIVE STARS all the way......
by: Hilary08/14/2020
We had ordered the wrong lock to go with a rack and etrailer called asking if it was OK to change the order to this lock. It was also cheaper. Fantastic service. Thank you so much!
25
145
Show More Reviews
See what our Experts say about this Swagman Trailer Hitch Lock
- Recommended Hitch Receiver and Bike Rack for Use Behind TrailerStarting with the hitch receiver for your trailer, if you indeed have a 4 x 4 inch bumper, the Ultra-Fab # UF35-946401 that you referenced is what I recommend. This is designed to attach to 4 inch x 4 inch square bumpers with the included hardware and U-bolts. If you are just looking to use the 2 inch receiver for hitch-mounted accessories like bike racks, this is a great option and it will work well. Moving on to the bike rack, the Kuat Beta was a really nice 2-bike hanging-style rack,...
view full answer... - Bumper-Mount RV Hitch for Use with Swagman RV-Rated Hitch Bike Rack S63381The Swagman Locking Anti-Rattle Threaded Hitch Pin # S64027 provides two functions. It has a threaded shank to match their 2-inch hitch bike racks and that can be tightened to reduce the play or wobble of the rack in the hitch. It also includes a key-operated lock that prevents removal of the threaded pin even if it were loosened with a wrench. We do offer 2-inch bumper-mount hitches that can allow use of a bike rack on an RV. All such 2-inch hitches are displayed on the linked page. These...
view full answer... - Can the Swagman Platform-Style Bike Rack 64663 be Installed on a Trailer HitchYes, you can use the Swagman Platform-Style 2 Bike Rack # S64663 with a 2" receiver, like the Curt # E-100 that you referenced, or with the bumper mount that comes with the bike rack. To ensure that this fits your application you can measure 6-3/4" from the front end of your bumper as that is about where the rearmost cradle will sit of the Swagman bike rack. If you would like to add locks to this bike rack then part # S64027 will lock the bike rack while 2 of the padlocks # 131D will...
view full answer... - RV-Rated 3-Bike Rack & Hitch for 2016 Coachman Clipper Pop Up Camper TrailerCurt RV hitches # C19101 and # E-100 will not work on a C-channel bumper so you may want to consider a frame-mounted RV hitch like # 13703 or one of the others shown on the linked page. These have a 2-inch receiver opening for your bike rack or other RV-rated accessory and the various model fits varying frame widths; some are bolt-on while others are weld-on products. You can confirm in your owner's manual whether Coachman rated the camper's frame for hitch installation. A bike rack to...
view full answer... - Swagman XTC4 Bike Rack # S64665 Comes with an Anti-Rattle Hitch PinYes, the 4 Bike Rack for 2 Trailer Hitches, Wheel Mount - Swagman XTC4, part # S64665, comes with an anti-rattle hitch pin, but this is not a lock. The Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2 inch Hitch Racks is part # S64027.
view full answer... - Will the Swagman XTC-4 Bike Rack # S64665 Work on a 2011 Subaru Forester with Class III HitchWith a Class III, 2 inch, hitch on your Subaru Forester you will only need to make sure that the weight of the bike rack, 65 pounds, and the weight of the bikes you are carrying are less than the tongue weight limitation of your hitch and your vehicle. The tongue weight capacity of your vehicle can be found in the owners manual and the hitch tongue weight capacity should be stamped into the hitch near the receiver or listed on a sticker attached to the hitch. For the Swagman XTC4, item...
view full answer... - Trailer Hitch Pin Lock Compatible with Swagman XTC-2 Trailer Hitch Mount Bike Rack # S64670Yes. Since the Swagman XTC-2, # S64670, can be used with a 1-1/4 inch and 2 inch trailer hitch, the correct lock is # S64029. The Locking Anti-Rattle, Threaded Hitch Pin, # S64029, is uniquely threaded and sized to only work with Swagman bike racks that fit in 1-1/4 inch or 1-1/4 inch and 2 inch trailer hitch mount bike racks. If it were a bike rack that is designed to only fit in a 2 inch receiver, the lock would not work and instead you would use # S64027.
view full answer... - Recommended Trailer Hitch And Hitch-Mounted Bike Carrier For 2010 Toyota RAV4The hitch I recommend for your 2010 Toyota RAV4 is the Curt Trailer Hitch, part # C13149. This is a Class lll hitch and has a 2 inch receiver opening. I have attached a link to an installation video for this hitch on a RAV4 you can take a look at. As the video shows, there is a measurement of about 6 inches from the hitch pin hole to the back of the spare tire cover. We will use that measurement for making a recommendation. I have attached a link to a helpful article that explains how...
view full answer... - Will Swagman Original 4 Bike Towing Rack work for 2018 Ram 1500?Yes, the Swagman Original 4 Bike Towing Rack # S64675 will fit the 2018 Dodge Ram 1500 as long as your Ram has a 2 inch receiver opening. It allows you to carry all four bikes and tow a trailer with this tilting bike rack. Cushioning grips your bike frame as the top plate is tightened down. Install your hitch ball, lock the rack in the upright position, and you are ready to tow! Along with the Swagman bike rack, the Locking Anti-Rattle Threaded Hitch Pin lock # S64027 is recommended! This...
view full answer... - Recommended 4-Bike Rack For Use Behind Travel TrailerWe certainly have some options for 4-bike racks that are confirmed for use behind a travel trailer. Since the manufacturers approve the racks for use behind a travel trailer, as long as the instructions are complied with, the warranty covers the racks being used behind a trailer. Only certain bikes have been tested and approved for use behind trailers, motorhomes, or RVs. The best option behind a trailer is to use an approved bike rack with a fixed frame, one that does not tilt down or...
view full answer... - Locking Hitch Pin for a Swagman XTC2 Bike rackThe locking hitch pin for the Swagman XTC2 bike rack, # S64670, is # S64029. I have linked a video review of this locking pin for you.
view full answer... - Anti-Rattle Hitch Pin Lock for a Swagman XTC-4 Trailer Hitch Mounted Bike RackThe Swagman XTC-4, # S64665, can use Locking Anti-Rattle, Threaded Hitch Pin, # S64027. The bike rack has a weld nut inside that is uniquely threaded and will only work with specific Swagman locks. When the locking hitch pin is tightened, it will pull the rack shank tight against the receiver, eliminating rattle. Because of the uniquely threaded weld nut inside, the Anti-Rattle Device and Lock, # SR25219, cannot be used.
view full answer... - Recommendation for Trailer Hitch Pin Locks that Can be Keyed AlikeThe lock that you have referenced, # S64027, is designed specifically for use with Swagman bike racks and will not work with a tow bar because it is uniquely threaded. Instead, you can use Trailer Hitch Receiver Lock, # e98880. You can choose the keyed alike option and then select the quantity and you receive all the locks keyed alike. The hitch pin lock does not have a specific capacity but it is more than strong enough for your application. I have included a link to a video review of...
view full answer... - Will Swagman Anti-Rattle Bike Rack Locks fit a Thule Roadway TH915XT I pulled both this lock and the Swagman part # S64029 from our warehouse to try them. The Thule racks use a different thread, so neither of the Swagman locks will fit. It would be best to use the Thule THSTL2.
view full answer... - Replacement Anti-Rattle Hitch Pin for Swagman G10 Bike RackAre you just looking for a hitch pin, or did you want a locking pin? Many of the threaded hitch pins are brand specific, so you'll want to use a Swagman pin because they manufactured the G10 bike rack. For a standard hitch pin, use # P5901. If your G10 is compatible with both 2 inch and 1-1/4 inch hitches, for a locking hitch pin you'd need # S64029 or # S64027 if the rack only works in 2 inch receivers.
view full answer... - Does the Swagman XTC Bike Rack # S64665 have Rubber Wheel Straps and Require 2 Locking Hitch PinsYou would only need one Swagman Hitch Pin Lock, part # S64027, to secure the Swagman XTC4 Bike Rack, part # S64665, to your trailer hitch to help deter theft. It would be possible to unbolt the rack from the shank and take the rack. If you wanted to add another locking hitch pin for added security, you could. We also offer the 10 Foot Cable Lock, part # e98891, which can be used to lock the bikes to the bike rack. The rack now comes with rubber straps as an upgrade to the old hook and...
view full answer... - 4-Bike Rack Recommendation for Use on the Back of a 5th Wheel TrailerThe bikes racks that are rated for use on the back of a motor home or 5th wheel are built specifically to withstand the extreme twisting forces found at the rear of such vehicles. For the same reason that the rear-most seats on a roller coaster or school bus get a rougher ride than those in the front, a bike carrier mounted at the rear of a 5th wheel will be subjected to forces that would potentially destroy a carrier intended for use on a standard passenger vehicle. However we do offer...
view full answer... - Need Replacement Hitch Pin and Clip for Swagman Original 3-Bike Hitch-Mount Bike Carrier # S64152-2We can provide you with several options for a replacement hitch pin to secure your Swagman Original # S64152-2 to your 2-inch hitch receiver. The most cost-effective option is a simple pin and clip set, part # PC3. This fits a Class III or Class IV hitch that has a 2-inch receiver opening with a 5/8-inch hitch pin hole. This pin and clip do not lock the carrier to your hitch. If you wish to add some anti-theft and anti-rattle capability to your bike carrier you could instead use the Swagman...
view full answer... - Recommendation on a Swagman Bike Rack That Can be Used on Both a Ford F-150 and a Travel TrailerSwagman has a few bike racks that can be mounted in the 2 inch hitch of your 2015 Ford F-150 and also rated to be used on a RV. I recommend the Swagman Trailhead 4-bike Rack for 2 Inch Hitches, # S63381, is a bike rack that can be mounted in a 2x2 inch receiver hitch and also is rated to be used on an RV. The Trailhead rack has a 4 bike capacity with a 35 lbs per bike weight capacity. The distance between the center of the hitch pin hole to the bike rack upright measures 9-1/2 inches....
view full answer... - Recommended Bike Rack Similar to Old Rack Attack 3 Bike CarrierThe Curt Trailer Hitch Receiver # 13530 is a 2 inch receiver opening and based on your photo the Rack Attack bike carrier is a really old style that is no longer made and we don't carry any adaptors for. My recommendation is to use a similar style carrier like the Swagman Original - 3 Bike Rack for 2" Trailer Hitches # S64152-2. There are also locking knobs # P1040 and hitch pin lock and anti-rattle # S64027 which I recommend.
view full answer...
- Features of Swagman 4 Bike Wheel Mount Bike Rack Part # S64665Due to the weight involved and the length of the carrier, the platform type carriers are limited to a 4 bike capacity. If you would care to use a hanging-type bike carrier we have 3 models that accommodate 5 bikes. Of these, I would recommend either the Yakima DoubleDown part # Y02425 or the Thule Roadway part # TH915XT. If I had to choose between the two, I would go with the Thule model. The straps that retain the bike to the rack are wider and constructed of thicker rubber. On the Swagman...
view full answer... - Locking the Swagman XTC4 Wheel Mount Bike Rack and Securing the Rack to the VehicleThe topmost hook on each upright can be locked with a padlock. You would need 4 small padlocks to lock each of the bikes. I have a recommendation that may be a bit easier if you do not like the idea of 4 padlocks. You could use the Roadmaster Coupler Padlock, item # RM-305, and a cable like the Master Lock 10-mm Braided Steel Cable - 6 foot, item # 78DPF. With this lock and the cable you could slide the lock through one of the sets of holes at the base of the outermost upright bar and...
view full answer... - Recommended RV-Approved Hitch Bike Rack for Use on Back of 5th Wheel TrailerHitch-mount bike racks for use in the 2-inch hitch on your 5th wheel are available in both hanging and platform styles, 2-, 3- and 4-bike capacities and in tilting, folding and fixed types. You can click on the included link to see all options and the filters on the page allow you to narrow the results based on your preferences for bike capacity, etc. For the least potential for motion while travelling I suggest a fixed hanging-style rack like the Swagman Original 4, part # S64400. A fixed...
view full answer... - Can the Kuat Beta 2 Bike Rack be Used Behind 5th Wheel Trailer I do have a solution for you, however the Kuat Beta Folding 2 Bike Rack # B202-2 referenced in your question is not rated for use behind a trailer. Because of the extra movement and stress that is put on a bike rack when it is mounted to the rear of a trailer, only certain bike racks are approved by the manufacturer to be used in this manner. Folding racks like the Kuat Beta typically cannot be used, as the folding feature creates a point of movement that can result in failure when exposed...
view full answer...
Do you have a question about this Trailer Hitch Lock?
Info for this part was:
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Jeff D
Installed by:
Kathleen M
Installed by:
Cole B
Installed by:
Evangeline M
Video Edited:
Joshua S
Updated by:
Adele M
Updated by:
Brian B
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Noah M
Updated by:
Manda E
Video by:
John S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Liz
1/21/2015
Still works great. Very satisfied.