Blue Ox Trailer Hitch Receiver Lock for 2" Hitches
(111 reviews)
Price: $32.46
In Stock
Blue Ox Trailer Hitch Receiver Lock for 2" Hitches
Item # BX8858
Our Price: $32.46
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (111)
- Q & A (0)
- Videos (2)
- Photos
Blue Ox Trailer Hitch Lock - BX8858
- Fits 2 Inch Hitch
- Standard Pin Lock
- Keyed Unique
- Blue Ox
- 2-3/4 Inch Span
- Flush Pin
This Blue Ox receiver lock has a pin diameter of 5/8" and locks your Blue Ox tow bar to a 2" x 2" receiver.
Features:
- Locks Blue Ox tow bar to receiver
- Constructed of forged and machined hardened steel
- Chrome finish resists rust and corrosion
- Fits 2" x 2" trailer hitch receivers
Specs:
- Pin diameter: 5/8"
- Overall length: 6"
- Span: 2-3/4"
BX8858 Blue Ox Receiver Lock - 2" x 2" Trailer Hitch Receivers
Video of Blue Ox Trailer Hitch Receiver Lock for 2" Hitches
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Blue Ox Trailer Hitch Receiver Lock Review
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Product did not meet expectations
- etrailer mistake
- Arrived Damaged
Customer Reviews
Blue Ox Trailer Hitch Receiver Lock for 2" Hitches - BX8858
Average Customer Rating: 4.8 out of 5 stars (111 Customer Reviews)
This Blue Ox receiver lock has a pin diameter of 5/8" and locks your Blue Ox tow bar to a 2" x 2" receiver.by: Rudy04/25/2024
Good security and I like having one key operate the pins
by: Luis 01/08/2024
Easy to use and provides much extra security. Using it with a bike rack that stays on the jeep most of the time.
by: Angela 05/13/2024
Does what it is intended to do!
by: Chris Lee06/16/2022
Wheel feels very solid and I received it quickly. I had it welded to 5/16" wall 2" X 2" steel tubing so I can insert it when necessary . I didn't want to weld it under the tow hitch itself because of already low clearance . When inserted into the tow hitch the wheel extends 3/4" lower than hitch. My truck is a 2022 Chevy single axel cutaway.
by: Scott 02/16/2024
Good products fairly priced, took 4days to get here, paid for 3day shipping
by: Joe G08/08/2019
I like securing my expensive blue-ox from theft. Disappointed that the chrome so quickly rusted.
by: John 08/19/2022
Great build. Heavy duty locking mechanism. Have no doubts this lock will hold up over time. Marked down one star because it's a little short for the gen 2.5 Tundra's receiver hitch and required me to shave off some metal off the stock receiver to get it to fit.
by: Anton11/26/2022
Have used it primarily with u-haul trailers. Sturdy, good locking, functional, would buy again.
by: Ann 09/22/2022
E trailer had locking hitch pins that I needed and keyed them the same Love not having to figure out what key goes with what pin. Everything was in stock and shipping was fast.
by: Scott03/12/2018
I recently bought several products from etrailer including a Curt 2” receiver hitch, Yakima bike rack, and a Blue Ox locking hitch pin. ettrailer was super easy to buy from. They definitely had the best prices and super quick shipping and their fit guide worked perfect when trying to get a product that will work with what I have. The Blue Ox locking hitch pin works great for securing your hitch. Fits perfect and is super easy to use. Would definitely recommend E-trailer to friends and family.
by: Paul 10/29/2022
Delivery was right on time! Thank you “etrailer” I will definitely be placing more orders with you.
by: Donald01/13/2021
The lock has started to rust and is hard to unlock with the key even though I have kept the rubber keyhole cover in place to protect it.
by: David 05/30/2021
Did it's job well, unfortunately, when I upgraded to a 2.5inch receiver hitch the lock no longer fit
by: Sally 07/14/2022
I have not used this lock yet, but I wanted to take this opportunity to commend etrailer for their unparalleled customer service. This is not my first order and it will certainly not be the last. I wish other companies were even half as attentive and efficient.
by: Rod12/20/2014
Added a step down receiver to the receiver on the new motorhome and need to remove the tow bar when it is being stowed. I hate using the spring mounted bolts that are standard (hard on the fingers) and this works great. Be sure you know whether you need one that is 2" or 2 1/2". I measured and bought the 2" one.
by: June 04/08/2021
Had the lock 1 year, still looks good and have had no problems with it. I actually have 2 and would definitely recommend this product and of course etrailer. Great products, prices,fast shipping and great customer service.
by: John05/31/2018
This product was good, but did not fit my hitch because I actually needed a inside length of 3 inch to 3 1/2 long to fit. This one was too short. However, not the fault of etrailer. Had to send back.
by: Robert 10/22/2021
Strong and easy to lock, non intrusive with safety chains or electrical equipment
by: Gary 05/24/2023
Great service and products as usual
by: Excellent05/11/2017
Package arrived in good shape - just what I ordered. Installed easily & works great to tow car behind RV with bike rack in upper receiver spot. Arrived one day ahead of promised. Thanks
by: Allan F03/14/2017
I've had this product(receiver Lock) for about a year now and it still works great. Easy to install and remove.
by: Patrick 03/28/2023
Heavy Duty, great item!
by: Linda 12/08/2019
Bought the Blue Ox tow bar also. Couldn't be happier.
by: Jimmy C.04/26/2016
Product as described. Use on pickup trailer hitch. Heavy duty.
by: W.m.04/29/2018
I keep my Blue Ox on my hitch 24/7, I don't think anyone would even try to take it !
25
111
Show More Reviews
See what our Experts say about this Blue Ox Trailer Hitch Lock
- Installation of Draw-Tite Trailer Hitch Receiver on 2017 Honda CR-V TouringThe Draw-Tite Max-Frame # 76128 is confirmed to fit your 2017 Honda CR-V. Unfortunately, we have not had the chance to install the hitch and make a video as of yet. I have linked the install instructions for you on this page. If you're going to be towing with your Honda and need a ball mount the adjustable B&W Tow & Stow # BWTS10035B provides up to 3 inches of drop or 3-1/2 inches of rise. It also features the ability to be stored under the hitch when not in use. Use lock # BX8858...
view full answer... - Does the B&W Tow & Stow 2-Ball Mount Include Hitch PInThe B&W Tow & Stow 2-Ball Mount # BWTS10033B referenced in your question does not include a hitch pin. I recommend adding a locking hitch pin like the Blue Ox Trailer Hitch Receiver Lock # BX8858. This chrome receiver lock will work great to secure the ball mount to your hitch receiver while also helping to deter theft. The tube-style key lock resists picking and the weather-resistant plastic dust cap will keep the cylinder free from water and debris. 2 keyed-alike keys are included....
view full answer... - Recommended Ball Mount Like B&W # BWTS10033B But With 1-7/8 Inch and 2 Inch Hitch BallThe B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black # BWTS10033B does come in the hitch ball sizes you requested, just with a different part number. You will want the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 7.5K - Black # BWTS10035B to get the 1-7/8 inch and 2 inch hitch ball with all of the other features being identical. I've attached a video of this ball mount for you. I also recommend using a hitch lock like # BX8858 to secure your...
view full answer... - Recommended Ball Mount For OEM 2 Inch Hitch Receiver and 6 Inch Frame Lift on TruckFor your factory trailer hitch receiver and 6 inch lift on your truck, you will want a ball mount with a significant drop so you can tow your trailer level. The B&W # BWTS10033B is a great ball mount, but it will not give you enough of a drop to tow your trailer level. I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 9" Drop, 9-1/2" Rise - 10K - Black # BWTS10043B to give you the same functions but the drop needed to account for your lift. I have attached videos to assist....
view full answer... - Hitch Ball Sizes and Towing Capacities for B&W Tow and Stow # BWTS10048CThe B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Chrome # BWTS10048C comes with 3 different size hitch ball options. They are the standard sizes to match the trailer couplers. The smallest is 1-7/8 inches and can tow up to 3,500 lbs. The middle size is 2 inch and can tow up to 7,500 lbs. The largest is the 2-5/16 inch diameter and can tow up to 10,000 lbs. With a ball mount like this, I recommend the hitch lock # BX8858 to secure it to your trailer hitch receiver
view full answer... - How Rust Resistant is the Finish on the B&W Tow & Stow Chrome Ball Mount?The B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Chrome # BWTS10048C has a dual process chrome plating on the shank as well as the hitch balls. This is not only to ensure it continues to look nice but to provide excellent rust resistance. We have had no customer complaints on the product that I'm aware of regarding the finish holding up to the elements and regular use. I recommend a locking hitch pin like the Trailer Hitch Receiver Lock for 2" Hitches - Flush...
view full answer... - Recommended Adjustable Ball Mount with 9 Inch Drop CapabilityThe chrome plated 3-ball # BWTS10048C does not come in a 9 inch drop size. However there is a black version that has 2 hitch balls that will meet that drop requirement. I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 9" Drop, 9-1/2" Rise - 10K - Black # BWTS10043B. This ball mount will have the same stowing feature as well as the 1 inch increment adjustment and two hitch pin hole options. It has the 2 inch and 2-5/16 inch hitch balls, but not the 1-7/8 inch diameter option. I...
view full answer... - Will B&W Tow & Stow 2-Ball Mount # BWTS10037C Fit 2 Inch ReceiverYes, the B&W Tow & Stow 2-Ball Mount # BWTS10037C referenced in your question does indeed fit a 2 inch trailer hitch receiver. This adjustable ball mount has a stowable design that allows you to store the hitch ball and mount platform beneath the vehicle when not in use. It has a maximum rise of 5-1/2 inches and a maximum drop of 5 inches. It includes a 2 inch and 2-5/16 inch hitch ball. I have attached a short video demonstration on this product that you can take a look at. I recommend...
view full answer... - Recommended B&W Tow & Stow Ball Mount with 7 Inch DropI do have a solution for you, however the B&W Tow & Stow 2-Ball Mount # BWTS10037C referenced in your question will provide a drop of up to 5 inches. For a drop of 7 inches, I instead recommend the B&W # BWTS10040C. This will give you a rise of up to 7-1/2 inches or a drop of up to 7 inches and features the same chrome plating on the shank and hitch balls. It has a weight capacity of 7,500 pounds with the 2 inch ball and a 10,000 pound capacity with the 2-5/16 inch ball. I have attached...
view full answer... - Which Draw-Tite Trailer Hitch Receiver Fits a 2013 Ford Edge SEL with Dual ExhaustThe Draw-Tite Trailer Hitch Receiver # 75728 is for the Ford Edge Sport and will not fit your 2013 Ford Edge SEL. On you SEL model instead you need Draw-Tite # 75992. It is designed to fit models with dual exhaust. I've attached a picture of the hitch on an SEL with dual exhaust that I found in the install details. I've also linked the install details and an install video for you. If you're going to be towing with your Edge the wiring harness to fit is # 118515. It plugs into the...
view full answer...
- Recommended Trailer Hitch Receiver and Other Parts for Towing a Trailer with a 2004 Ford RangerHidden Hitch has actually been discontinued completely. They were purchased some time ago by the same parent company as Draw-Tite. If there are any still floating around it's because they haven't run out yet. However, we no longer carry the 70181. Instead for your 2004 Ford Ranger I recommend the Curt # 13138. It has similar specs and look to the 70181. I've attached a video of it being installed on a 2006 Ranger. If you're going to be towing a trailer with the Ranger you'll also...
view full answer... - Parts Needed to Tow a Trailer with Brakes Using a 2016 Hyundai Santa FeThe Curt trailer hitch receivers for the 2016 Hyundai Santa Fe are # C13152 if you have a Sport model or # C13153 if you have an SE or Limited. I've attached videos of both being installed. In order to connect to the Flagstaff's 7-way and power the brakes you'll first need a 4-way wiring harness on the Hyundai. The Curt # C56184 will work regardless of which model your Santa Fe is. This install video is also attached. Then you'll use our # ETBC7 kit to convert the 4-way to a 7-way....
view full answer... - Trailer Hitch Receiver Confirmed to Fit a 2017 Ford ExplorerWe do have trailer hitch receivers to fit your 2017 Ford Explorer but the Draw-Tite # 75278 will not fit. It's for several different models of GM vans. Instead you'll want to use Draw-Tite # 76034 on your Explorer. I've linked an install video for you. If you're going to be towing a trailer you'll also need a wiring harness. I recommend the Tekonsha 4-way # 118540. You'll also need a ball mount and hitch ball. I've attached a link of our selection of ball mounts for a 2 inch hitch...
view full answer... - Recommended Locking Hitch Pin to use with the B&W Tow & Stow 3-Ball Mount # BWTS10048CThe locking hitch pin that I recommend using with the B&W Tow & Stow 3-Ball Mount # BWTS10048C is the Trailer Hitch Receiver Lock # BX8858. This is a chrome hitch pin that will resist rust and corrosion plus it includes a cap for the open end to keep the cylinder clean from water and debris.
view full answer... - Recommended Trailer Hitch and Wiring for 2018 Hyundai Santa Fe Sport 2.4LFor your 2018 Hyundai Santa Fe Sport, the Curt Trailer Hitch Receiver - Custom Fit - Class III # C13152 is a confirmed fit. It has a round tube design and black powder coat finish over a protective base coat to keep it looking nice for an extremely long time. For your trailer wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118571. This custom-fit T-One connector plugs into your Hyundai Santa Fe Sport wiring harness, which is located behind the...
view full answer... - Recommended Wiring Harness and Other Parts to Tow a Trailer with a 2004 Cadillac SRXThe wiring harness I recommend for your 2004 Cadillac SRX is the Curt # 56146KIT. There isn't a plug and play connector on your Cadillac but this harness will hardwire into the vehicle. The installation details are attached and I've attached an install video as well. If you don't already have a trailer hitch installed I recommend the Curt # C13050. It's custom designed for your SRX and will give you a 2 inch receiver opening. This install video is also attached. You'll also need a...
view full answer... - Will Curt Class IV Trailer Hitch Receiver Fit 1974 Ford F-250 with Standard Bumper and 34 Inch FrameThe Curt # C14082 will fit on your 1974 Ford F-250 as long as you have the crew cab. It does bolt on but will require drilling into the frame to install. I've attached a link that shows all of the Class IV hitch receivers confirmed to fit the different models of your F-250. If you also need a wiring harness use the Hopkins # 40105 for a 4-way connector or the Draw-Tite # 20023 for a 7-way. You might like an adjustable ball mount. The B&W Tow & Stow # BWTS10048B provides up to either...
view full answer... - Best Trailer Hitch Receiver and Other Parts Needed to Tow a Trailer with a 2017 Jeep Wrangler SaharaThe best trailer hitch receiver for your 2017 Jeep Wrangler Sahara is Draw-Tite # DT78MR. This actually replaced the 75514. I've linked a video of the install for you. The wiring harness I recommend is the # 118416. This will provide the 4-way trailer connector. It plugs in behind the driver's side tail light. You'll also need a ball mount and hitch ball. I've attached link of our selection of ball mounts for a 2 inch hitch receiver as well as an article to help you determine the...
view full answer... - Recommended Ball Mount to Tow a Trailer of Unknown Height with a 2017 Honda RidgelineSince you won't be able to determine the rise or drop you need ahead of time I recommend going with an adjustable ball mount on your 2017 Honda Ridgeline. My choice is the B&W Tow & Stow # BWTS10040B. It provides up to either a 7 inch drop or 7-1/2 inch rise. It also has the feature to be flipped under the hitch and stored away while not in use. This keeps it out of the way when accessing the bed of your Ridgeline. It also keeps you legal because some states have outlawed driving with...
view full answer... - Locking Hitch Pin for a Blue Ox Alpha Tow BarThe Blue Ox Alpha tow bar, # BX7380, and all hitch mounted tow bars fit in a 2 inch receiver. So you would need a 5/8 inch diameter lock such as # BX8858. A Class II accessory would have a 1-1/4 inch shank whereas Class III accessories have 2 inch shanks.
view full answer... - Parts Needed to Add a Trailer Hitch Receiver to a 2014 Toyota HighlanderIt depends on what you're using the trailer hitch receiver for. First off, I recommend the Draw-Tite # DT65MR for the hitch receiver. It bolts right onto your 2014 Toyota Highlander and all the necessary hardware is included. If you plan to use the hitch for carrying a cargo carrier or bike rack then the only other thing you need is that accessory and you're good to go. If you plan to use the hitch to tow a trailer you'll also need trailer wiring, a ball mount, hitch ball, and a pin...
view full answer... - Recommended Trailer Hitch Receiver for 2017 Lexus RX350For your 2017 Lexus RX350, I recommend the Curt # C13272. This receiver has a 600 lb TW and 4000 lb towing capacity. Then if you use a weight distribution system, this increases to 5000 lb towing capacity. For your tow wiring, I recommend # 118255. This is custom designed to fit your vehicle without splicing into the factory wires. You just plug it in and you are ready to go. This harness will work with a trailer or other lighted accessory. If you will be towing, I recommend the...
view full answer... - Recommended Trailer Hitch Receiver For 1998 Chevy S10 Sportside With Roll Pan BumperWe have a hitch that will fit your 1998 Chevy S-10 Sportside with Roll pan bumper. It is the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75085. If you will be towing with this receiver, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118359. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located at the rear, along the inside of the driver's side frame rail. I've attached an installation...
view full answer... - Parts Needed to Tow a Trailer with a 2017 Nissan Rogue HybridI verified with Curt that their trailer hitch receiver # C13204 and wiring harness # C56033 will both fit on your 2017 Nissan Rogue Hybrid. I've linked videos of both being installed on Rogues, although not hybrid models. The install process is the same. Since you're going to be towing a trailer with the Rogue you'll also need a ball mount and hitch ball. I've attached a link of our selection of ball mounts for a 2 inch hitch receiver as well as an article to help you determine the correct...
view full answer...
Do you have a question about this Trailer Hitch Lock?
Info for this part was:
Updated by:
DeAnne T
Updated by:
Laura H
Updated by:
Wilson B
Expert Research:
Michael H
Expert Research:
Jameson C
Video by:
Joshua S
Video Edited:
Jacob T
Installed by:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.