bing tracking image
  1. Trailer Breakaway Kit
  2. Bright Way
  3. Single-axle
  4. Tandem-axle
  5. Kit with Charger
  6. Battery Included
Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Top Load

Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Top Load

Item # 3802308
Retail:$64.01
Our Price: $47.49
You Save: 26%
Trailer Breakaway Kit
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Simple, push-to-test button lets you check the charge on the battery in this breakaway kit. Complete kit brings your trailer to a safe stop if it separates from your vehicle. Built-in charger automatically charges battery while trailer is connected. Great Prices for the best trailer breakaway kit from Bright Way. Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Top Load part number 3802308 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (120)
  • Q & A (0)
  • Photos

Bright Way Trailer Breakaway Kit - 3802308

  • Single-axle
  • Tandem-axle
  • Bright Way
  • Kit with Charger
  • Battery Included
  • Top Load
  • 5 Ah
  • 1 Amp Charger
  • LED Tester

Simple, push-to-test button lets you check the charge on the battery in this breakaway kit. Complete kit brings your trailer to a safe stop if it separates from your vehicle. Built-in charger automatically charges battery while trailer is connected.


Features:

  • Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle
    • Brakes receive signal to activate when cable detaches from switch
  • Built-in charger automatically charges battery while connected to tow vehicle
  • Push-to-test button lets you check the battery's state of charge
    • LED lights indicate current battery status
      • Green = fully charged
      • Yellow = charging
      • Red = recharge needed
  • Top-loading case is easy to access from above
  • Durable, plastic case protects the battery from the elements
    • Rubber O-ring seal keeps out moisture
  • 12-Volt, sealed lead-acid battery is rechargeable
  • Wire loom neatly contains and protects wires
  • Switch and battery box install on trailer frame - drilling required
    • Hardware not included
  • Convenient wiring diagram is printed on box
  • Kit includes breakaway switch, 1-amp charger, 5-amp-hour battery, battery box, wiring, and wire loom


Specs:

  • Application: single-axle or tandem-axle trailers with electric braking systems
  • Breakaway cable length: 4'
  • Charger amperage: 1 amp
  • Battery:
    • Capacity: 5 amp-hours
    • Voltage: 12V
  • Battery box dimensions: 4-3/4" long x 6" wide x 4-7/8" tall
  • 1-Year limited warranty


Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.



2308 Bright Way Group (BWG) Trailer Break Away System with Switch, 12V 5Ah Battery, and 1 Amp Charger - Top Load

Replaces Bright Way 3802307




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Top Load - 3802308

Average Customer Rating:  4.6 out of 5 stars   (120 Customer Reviews)

Simple, push-to-test button lets you check the charge on the battery in this breakaway kit. Complete kit brings your trailer to a safe stop if it separates from your vehicle. Built-in charger automatically charges battery while trailer is connected.

by:

The battery was fully charged when it arrived and still fully charged a couple of months later when I finally got around to installing it. Works as expected. The lanyard for the breakaway switch is pretty long (50",) so I installed it as far back as I could on the trailer frame.

Jacques

4/11/2023

Great. I have not needed the breakaway controller. I have noticed the battery holds a charge for a long time, so even though I don’t use the tailer for months at a time, it stays charged and gets topped off when I use the trailer.



by:

This made the brake system rebuild super easy. Great price and shipping is always fast with etrailer



by:

I bought a used trailer and its breakaway was in rough shape with a dead battery. This kit was easy to install and has been working great.



by:

First off my 20' trailer I bought is only 2 years old, I tried every place in town and no one had a breakawway kit to match mine, all they said it was an old style. Got on computer found etrailer got the best cudtomer service and was able to get full demension, was an exact match, hooked it up and is working great.



by:

Fast delivery with good pricing! Thx



by:

Easy to install and works as designed. It was a good choice foe me



by:

Item is as described



by:

First things first. Love your company! Keep up the great work. etrailer has been my go to site for all my trailer needs. As for the break away kit. I got a used inclosed trailer and it had a very large truck battery inside the trailer with a very large hole in the floor for the trailer breakaway system. An eye sore to say the least and very much in my way. I was shopping around etrailer site found the Bright way breakaway system. Watched the review about it. Did not think it would work for my two axle brake system. Ordered it anyway. Installed on outside of trailer. Did all this after installing new brakes. Did a test and I could not get the wheels to turn with trailer off the ground as well as doing a test with the trailer on my truck and the breakaway system worked and held the truck in place. Bottom line is the system does it job for a small battery. Love the system. It is small, can be placed almost anywhere, and again does its job. Only issue I had with it was the two screws that hold the cover closed started to rust after the first time it got wet. I replace them with better ones.



by:

Truly makes installing the brake controller a snap... two snaps actually.



by:

etrailer is great as always. They are my sole source for everything trailer and I have never had a complaint against them.

This product on the other hand, horrible. They apparently have no quality control and make a crap product. When I received it, I took out the two screws holding the lid closed, to charge the battery before installing it on my trailer. When I went to open the lid, the first thing I noticed was the hinge on the lid was broken in two of three places holding the hinge to the lid. (see attached pictures) I immediately contacted etrailer and they sent me a replacement, like I said before they are great.

So I just received the replacement, I gently opened the box and the first thing I did was check the hinge. Wanna guess? Yep it was broken in two of the three places as well. The product packaging was in excellent shape, the shipping boxes were in great shape for both, there are no signs of shipping damage. So this is a lid that is supposed to be mounted to a trailer and survive the elements for years and it can't even make it to the consumer without damage.

NO I DO NOT RECOMMEND THIS PRODUCT.



by:

Well built and easy to install. Like the visible charged condition lights



by:

Great product. Easy installation. Helpful instructions. Saved $$ over paying someone to install. Works p perfectly



by:

fast shipping
product as expected



by:

Purchased because this is what my trailer had before and I didnt want to rework the mounting or wiring. This setup is good for about 4-5 years. The labeling and film over the buttons does not stand up to UV rays very well and came off almost immediately, letting water into the enclosure. It seems like the circuitboard for the charger is mostly water resistant and the battery box drains well enough. Serviceable average grade kit.



by:

We've had serious problems with it the biggest problem we've had is it corroded the plug up so bad we could hardly see the terminals. Have no idea what it is or what caused it

Etrailer Expert

Sierra K.

11/11/2021

The breakaway kit would not have caused corrosive issues. I would follow your 7 way wire up to see where the corrosion starts. Perhaps there is a nick in the wire or other damage. Once corrosion starts on a terminal, without seeing it, it can quickly transfer onto the vehicle side.



by:

Excellent parts, very fast, great tracking, highly recommend



by:

Mounted fine and works as intended. Coated terminals on battery with dielectric grease to prevent corrosion because the battery box isn't water tight. Otherwise great product for the price.



by:

Good PRICE Works great!



by:

Good Quality break away kit! Highly rec ommend!



by:

Good replacement for Broken or worn out factory breakaway kit



by:

The breakaway box works great and was easy to install. The directions were clear. Shipping was fast. Great product and company!



by:

Wired well, battery is charging, so far so good. Have not and hope to never use.



by:

Is the best break away kit I have ever installed



by:

Second time I have ordered from eTrailer and everything was fantastic.



by:

Excellent system, easy to install, provides great protection for the battery, and the breakaway switch is very heavy duty!


25
120
Show More Reviews

See what our Experts say about this Bright Way Trailer Breakaway Kit

  • Converting Hydraulic Drum Brakes to Electric Brakes on Tandem 3,500 Lb Axle Boat Trailer
    Yes, plenty of people choose to use electric brakes on their boat trailer because of the lower maintenance and cost as compared to hydraulic brakes. To replace your current hydraulic brakes I recommend our Electric Trailer Brake Kit # AKEBRK-35-SA. This includes both the right hand and left hand brake assemblies, mounting bolts and adjuster plugs. If you are unable to reuse your old nuts and lock washers, those are sold separately as part # BRKH10B. Since you were checking out hub # Q-HUB84545,...
    view full answer...
  • Parts Needed to Add Electric Trailer Brakes to a Single 3,500 lb Axle Trailer
    To get your single 3,500 lb axle trailer set up for brakes you'll need the trailer brakes, hub and drum assemblies, wiring, and a breakaway kit. Here are the parts I recommend for this: - Electric Trailer Brake Kit - Self-Adjusting # AKEBRK-35-SA - Easy Grease Trailer Hub and Drum Assembly with 5 on 4-1/2" Bolt Pattern # AKHD-545-35-EZ-K - Epicord 7-Way Molded Trailer Plug with Junction Box # 277-000141 - 10 Gauge Wiring # 10-1-1 - Butt Connectors # DW05745-10 - Breakaway Kit # 3802308 I've...
    view full answer...
  • Parts Needed For Installing Electric Trailer Brakes On a Utility Trailer With Dexter 3,500LB Axle
    First you will need to verify that your Dexter axle has a Brake Flange # 4-35 to attach the Electric Trailer Brake Kit # AKEBRK-35-SA. The brake kit includes both the left and right side brake assemblies which are self-adjusting for better performance and to save you on having to adjust the brakes every 3,000 miles. Next you will need 2 Easy Grease Trailer Hub and Drum Assemblies # AKHD-545-35-EZ-K to replace your idler hubs. These have your same 5 on 4-1/2" bolt pattern along with the...
    view full answer...
  • Replacement Breakaway Pin for Roadmaster InvisiBrake Supplemental Braking System
    The replacement breakaway pin for the invisBrake # RM-8700 is actually # RM-200200-20, so this is the one you need. I do not recommend using a different pin, like # 3802350 (replacement cable and pin for Bright Way # 3802308 Breakaway Switch) because of subtle differences amongst pins.
    view full answer...
  • Replacement Breakaway Pin Recommendation for a Bright Way Breakaway Trailer Kit
    The replacement pin you would need for your Bright Way Breakaway system # 3802308 would be the part # 3802350. The only thing you would need to check is the condition of your breakaway battery, make sure it is fully charged before you tow the trailer. I attached an FAQ article on breakaway systems for you to check out.
    view full answer...
  • How To Add Electric Drum Brakes To A Trailer Without Brakes
    Yes, but there will be a few things you'll need to check first. You'll want to remove your wheel and check that there's a brake flange on the spindle of your axle for a brake assembly to mount to. Every part you'll need to going to be based off of the axle's specifications so you'll also want to find the axle tag as well. This is a sticker that lists the capacity of your axle and a bunch of other information. Once we have this info we can move forward picking out the right components. For...
    view full answer...
  • Troubleshooting Trailer Brake Controller Not Showing Trailer Connected When Truck is Running
    There are a couple possibilities you may be having. First I recommend checking the trailer wiring specifically with the Breakaway Battery Kit # 3802308. As the issue with the Brake Controller # 80550 only occurs when the vehicle is running this would be when power is sent through the charge line to the breakaway battery. If there is a short in the wiring for this that would then send power to the brakes that would cause an issue like you are having. If you disconnect the breakaway battery...
    view full answer...
  • Parts Needed To Add Electric Trailer Brakes To a Snowmobile Trailer With 3,500LB Axle
    We do have all the parts you will need but they are not available as a single kit. First you will need to verify your hub bearings and grease seal to ensure you have the standard 3,500LB sizes. The Inner Bearing # L68149(1.378" ID), Outer Bearing # L44649(1.063" ID) and Grease Seal # 58846(1.719" ID) are the common sizes used on 3,500lb axles and the hubs. We have the Hub/Drum # AKHD-545-35-G-EZ-K for EZ Lube spindles or the Hub/Drum # AKHD-545-35-G-K for standard spindles. Both hubs are...
    view full answer...
  • Converting from Electric to Hydraulic Disc Brakes on 2019 Big Tex Trailer With 12,000 Pound Axles
    The Kodiak Disc Brake Kit # K2R1058D11E is for 9,000-10,000 lb Dexter axles. Assuming you have a standard duty Dexter or Lippert 12,000 lb axle, the correct kit would be the Kodiak Disc Brake Kit - 11" Rotor - 8 on 6.5 - Raw Finish - Leaf Spring - 12K - Dexter/Lippert # K2R1258L12. This kit fits an idler hub assembly like the # 8-214-8UC1. You will need to verify which axles you have in order to make sure this will work, it is not for use with 12K HD axles. In addition to the disc brake...
    view full answer...
  • Parts Needed to Add Self-Adjusting Electric Brakes And Hub & Drum on 3,500 lb Axle
    Thanks so much for all that specific info and we do have exactly what you need for the hub and drum and self-adjusting electric brakes for your trailer with a 3,500 lb axle. The exact parts you need are the following: - Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles # 84546UC3-EZ - Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 - Bright Way Push-to-Test Trailer Breakaway Kit # 3802308 You'll need two hubs, but the electric brakes are a complete set with both the...
    view full answer...
  • Best Quality Trailer Breakaway Battery With Charger
    Easily the highest quality trailer breakaway battery with a charge and indicator is from Tekonsha, and is the following part number: - Tekonsha Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger # 50-85-313 Tekonsha has a deserved reputation for quality, and the # 50-85-313 fits that bill, as our customers who have used it have rated it very close to 5 out of 5 stars. The kit includes a 5 amp-hour battery, built-in charger, and push button indicator so you know if the battery...
    view full answer...
  • Complete Disc Brake Conversion Kit For A Tandem 10,000 Pound Dexter Axle
    Though we do not sell complete conversion kits with all the necessary parts to convert to disc brakes, we do have all the parts to put it together for your 10,000 pound Dexter axle we have a couple options. The first option is the Kodiak Disc Brake Kit # K2R1058D11E. This kit is designed for Dexter axles with oil bath hubs that are made after May 2013. The second option is the # K2R1058D11HD. This kit is made for axles prior to 2009. Both systems mentioned are slip-on-over-the-hub rotors....
    view full answer...
  • Parts Needed to Add Electric Trailer Brakes to Trailer With 3,500 lb Axle
    We can get your trailer with a 3,500 lb axle set up with electric brakes, and the first thing you'll need to do is be sure your axle has a 4-bolt brake mounting flange. If not, you can have one welded to the axle beam, but if you already have one you won't need it. I'll go ahead and list out all the parts needed: - Hub and Drum: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3 - Brake Mounting Flange for 2-3/8" Round Axle # 4-35 - Electric...
    view full answer...
  • Troubleshooting Trailer LED Light Burning Out When Not Connected To a Power Source
    It sounds like you may have a short in the Junction Box # 38656 and the Breakaway Battery # 3802308. This is the only way I see power getting to the led light on your passenger fender without having it connected to anything. You will want to make sure this is the only battery on the trailer that would have power to power objects to determine if it was wired incorrectly.
    view full answer...
  • Can Bright Way Push-to-Test Trailer Breakaway Kit Be Submerged On Boat Trailer
    A breakaway like the Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Top Load # 3802308 is weatherproof but not waterproof. Although it can stand up to rain you do not want to submerge it. The breakaway can be mounted however you see fit as long as it is secure on the trailer and the breakaway switch can function as intended. Installing it on your winch post will not cause a problem.
    view full answer...
  • Parts Needed to Add Electric Brakes to a 6x10 Trailer
    There will be a few parts needed to add electric brakes to your trailer. First, you will need to have a flange on the axle that a brake would bolt to. If you do not currently have this flange, you will need to add something like the Brake Mounting Flange # 4-35. This is designed for a 2 3/8" axle and will have a standard bolt pattern for a 3,500 pound braking set-up. With that being said, the etrailer.com # AKEBRK-35-SA will bolt directly to the # 4-35 with the # BRKH10B mounting hardware....
    view full answer...
  • Adding DeeMaxx Hydraulic Brake To A 2024 Brinkley Z2900 5th Wheel
    Hello Darren. Thanks for reaching out, I can definitely help with this. To convert your 2024 Brinkley Z2900 5th wheel over to disc brakes, you will need a disc brake kit, a brake line kit, and electric over hydraulic actuator, and a breakaway kit for the trailer. Your tow vehicle will also need to be equipped with an electric trailer brake controller. If you want to go with DeeMaxx brakes, such as the DeeMaxx Disc Brake Kit # DE68YR, this is definitely a good choice. Keep in mind this...
    view full answer...
  • Parts Needed to Add Electric Brakes to Single 3,500 lb Utility Trailer Axle
    If your 2021 Nissan Titan XD doesn't already have a 7-Way then you need to install the Hopkins # N40975. This gives you everything you need for your brake controller and to control the trailer lights. Then to add brakes and a 7-Way setup on your 3,500 lb utility trailer axle you need the following parts: - Brake Mounting Flange # 4-35 (if axle doesn't already have this on either side) - Self-Adjusting Electric Trailer Brake Kit # AKEBRK-35-SA - Brake Mounting Hardware # BRKH10B -...
    view full answer...
  • Making a Boat Trailer Tandem Axle By Adding Timbren Axle-Less Trailer Suspension System
    First I would recommend contacting the manufacturer of the boat trailer to ensure that you do not exceed the structural strength of the trailers frame with the amount of weight that you wish to be able to tow. It would be heartbreaking to see you put in all the work and the frame not to be strong enough. I recommend installing 2 sets of the Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs # A35RS545E. This is due to the suspension characteristics would be different between...
    view full answer...
    Image 1 for Image 2 for
  • Converting to Electric Over Hydraulic Disc Brakes on 2021 Diamond C Trailer
    According to Dexter, the Kodiak Disc Brake Kit # K2R1058D11E is compatible with your 10,000 lb Lippert axles. For idler hubs you can use the Dexter Oil Hub # 008-430-03. From there you will need the Hydrastar Electric-Hydraulic Actuator w/ Line Kit # CAR-HBA16-2. This comes with the brake actuator as well as the hydraulic brake lines. If you don't already have a breakaway installed, I recommend the Bright Way # 3802308. If you need a brake controller as well, you can use the # RED24FR...
    view full answer...
  • Trailer Breakaway Kit For Replacement of Melted Kit
    I'm certainly sorry to hear that; there are a couple of issues that may have caused this, from a bad kit to the far more likely scenario of there being a short somewhere along the wiring, though it's not possible for me to say with any real certainty. I do have to say that the breakaway definitely needs its own battery, which is required by law in most states. I highly recommend going with a breakaway kit that has its own battery, from Bright Way. You can choose from either a 5 or 10...
    view full answer...
  • Converting to Electric Trailer Brakes From Hydraulic on 3,500 lb Axle
    Yes, we can get your set up to go from hydraulic to electric brakes, and your photo (thanks so much for that) shows you have a 10 inch brake drum. So here is everything you'll need in order to switch: - Electric Trailer Brake Kit # AKEBRK-35-SA - Mounting Hardware for 10" Brake Assemblies # BRKH10B - Deka Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot # 10-2-1 - Bright Way Push-to-Test Trailer Breakaway Kit # 3802308 - Deka Heat Shrink Butt Connector - 12-10 Gauge # DW05745-5 The...
    view full answer...
    Image 1 for
  • Can New 7-Way Trailer Wiring Rewire be Tested
    The easiest way to tell if a trailer's 7-way wiring is functional is to have a vehicle with a 7-way nearby so you can just plug it in and test the functions. Otherwise we have a 7-way tester part # 8010 which I realize may not be the most practical solution. Or you could run 12 volt jumper wires from a vehicle's positive battery post to all of the circuits on the 7-way with a jumper wire ran from the ground pin to the negative side of the battery. For just the brakes you can run the jumper...
    view full answer...
  • Trailer Breakaway Kit For Small Utility Trailer
    Breakaway kits aren't fits for any specific trailer, and while it doesn't look like the trailer you mentioned has electric brakes, if you were somehow able to add them, then for a breakaway kit the best option is the Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Top Load # 3802308. I have added links below to a couple video reviews for you to check out as well.
    view full answer...


< Previous



Do you have a question about this Trailer Breakaway Kit?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Eric H
Updated by:
Eric H
Employee Carrie F
Updated by:
Carrie F
Employee Kristina F
Written by:
Kristina F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.