Brakes and Hubs for Rockwell American 7000lb Torsion Trailer Axles
Question:
Hey E- trailer, I have two 7K Rockwell American brand torsion axles on a pj deckover gooseneck. - 8 on 6.5inch lug spacing - 9/16inch wheel stud - 12inch x2inch brake assembly. 5 bolt mounting - 1.75 inner race, 1.25inch outer race - electric brakes - ez- lube fitting on end of spindle I am looking for 4 new brake assemblys and also 4 new drums for this setup. So far I have found kits 23-464-465 for brakes and 8-219-13UC3 for drums I would Like to stick with dexter parts if possible. Let me know if I am in the right direction to order them up. Thanks
asked by: Evan E
Helpful Expert Reply:
The two part numbers you mentioned are exactly the two Dexter part numbers you'd want! The brake assemblies part # 23-464-465 are a pair of self adjusting brake assemblies with a 7k capacity and then for brake/hubs you'd want the part # 8-219-13UC3.
Products Referenced in This Question
Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: castle nut
- Search Results: spindle castle nut
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Spindle Nut for Axles with 7/8" - 14 Castle Nut
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2
- Shop: Spindle Nut Kit for EZ Lube Axles
- Video: Redline Trailer Spindles 165931 Review
- Video: Review of Dexter Replacement BrakeRite Master Cylinder Cap - T4830600
- Video: Review of Dexter Replacement Master Cylinder Filler Cap Dexter Dico Model 60 Aero 7500 - T4480701
- Search Results: spindle nut
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Spindle Nut 1"
- Shop: Roof Rack
- Q&A: Replacement Hub and Drum Assembly For Older Drum Marked HD-1206
- Q&A: Can I Replace One Of My Torsion Axles With A Timbren Axle-Less Suspension System?
- Q&A: Placement of Front and Rear Hangers When Building a Tandem Axle Trailer
- Q&A: How To Determine Weight Capacity Of Torsion Axles
- Video: etrailer Trailer Brakes AKFBBRK-7L-D Review
- Video: Review of Trailer Valet Trailer Jack - 5K Manual or Drill Powered A-Frame Jack - TV94FR
- Search Results: wind deflector roof mounted
- Search Results: deflector
- Search Results: torsion axle
- Search Results: wind screen
- Q&A: Recommended Thule Aero Style Bar for Lengths Longer than 60 Inch WingBar Evo for Subaru Outback
- Q&A: What Weight Capacity of Tongue Jack is Needed for a 4,600 Pound Dry Weight Trailer
- Q&A: How to Make 7,000 lb Underslung Axle Into Overslung Axle
- Video: Thule ProBar Crossbars Review
- Video: Review of Kodiak Trailer Brakes - 13" Hub/Rotor 7K Dacromet/Stainless Disc Brakes - KOD95FR
- Article: Slipper Spring Trailer Suspension System Review