Replacement Bearings and Brake Shoes For The Dexter 7,000LB Axle Under a Big Tex 14GN Trailer
Question:
Hi ETrailer- I need assistance finding the whole kit I need to get to replace my 7k Dexter axle drum brake assembly on my Trailer. I am needing the bearings as well as shoe linings or if is there a kit for a whole replacement.
asked by: Cj M
Expert Reply:
Your 14GN Big Tex trailer with a Dexter 7,000lb axle is going to need the Bearing Kit # BK3-200. This will provide you with the bearings, races and grease seal for 1 hub so you will need 4 kits to replace the bearings on your entire trailer.
Depending on the brakes optioned for your axle you will either have the Standard Brake Kit # 23-180-181 or Nev-R-Adjust Brake Kit # 23-464-465. You should be able to find the part number stamped on the back of the brake assembly if you are unsure. The standard brake kit will use the Replacement Shoe Kit # DX28FR per hub while the Nev-R-Adjust will use the Replacement Shoe Kit # K71-676. If you cannot find the number stamped on the back of the brake assembly, please take a picture of the axle tag on the center of the axle tube and I can verify what Dexter installed on your axle from the factory.
Products Referenced in This Question
Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
Replacement Shoe Kit for Dexter 12" x 2" Manual Adjust Electric Brake Assembly - 7K
- Accessories and Parts
- Trailer Brakes
- Brake Shoes
- Dexter
more information >
Replacement Shoe and Lining for Nev-R-Adjust 12" x 2" Electric - RH
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 7000 lbs
- Brake Shoes
- 12 x 2 Inch
- Dexter
more information >
Product Page this Question was Asked From
Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 14125A and 25580
- Race 25520 and 14276
- 7000 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: How to Power Trailer Dome Light When Not Connected to Tow Vehicle
- Q&A: Options for Adding Interior Lighting to Enclosed Cargo Trailer
- Q&A: Recommended Dexter Suspension Kit 7753400
- Article: Most Popular Wheel Bearings
- Q&A: Is Bow in 3,500 lb Trailer Axle Enough Camber for Loaded and Unloaded Trailers
- Q&A: Replacement RV ladder for 2007 Monaco Diplomat
- Q&A: Mounting Hole Dimensions of Buyers Products 45 Ton Pintle Hook
- Q&A: Why Does Ground Wire of Brake Controller Need to Run to Battery when 7-Way Grounds
- Article: Brake Controller Installation: Starting from Scratch
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams