bing tracking image
  1. Roof Rack
  2. Inno
  3. Feet
  4. 4 Pack
Inno Flush Feet for Aero Crossbars - Naked Roofs - Qty 4

Inno Flush Feet for Aero Crossbars - Naked Roofs - Qty 4

Item # INXS200
Retail:$259.88
Our Price: $190.70
You Save: $69.18
Roof Rack

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 11 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
These Flush feet help you mount 2 Inno Aero crossbars to your vehicle's naked roof to create a roof rack with a streamlined look. Hand knobs tighten feet in place on your roof. Locking covers secure system to roof. Great Prices for the best roof rack from Inno. Inno Flush Feet for Aero Crossbars - Naked Roofs - Qty 4 part number INXS200 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (83)
  • Q & A (0)
  • Photos
  • Used (1)

Inno Roof Rack - INXS200

  • Feet
  • 4 Pack
  • Inno

These Flush feet help you mount 2 Inno Aero crossbars to your vehicle's naked roof to create a roof rack with a streamlined look. Hand knobs tighten feet in place on your roof. Locking covers secure system to roof.


Features:

  • 4 Feet let you mount Inno Aero crossbars on your vehicle's naked roof
    • Pair with 2 crossbars and a custom fit kit (sold separately) to create a complete roof rack
  • Flush design helps create a rack with a streamlined, from-the-factory look - bars don't extend past feet
  • Integrated hand knobs secure feet to your roof
  • Easy, slide-on installation to channels in bottoms of crossbars
  • Locking covers secure system to your roof
    • Also secure T-slot-mounted accessories to your crossbars
    • 2 Keys included
  • Durable, weather-resistant AES plastic construction


Specs:

  • Weight capacity: 165 lbs
    • Always observe your vehicle's maximum roof load capacity
  • Limited lifetime warranty


XS201 Inno Aero Bar Flush Stays for Bare Roofs - Qty 4

Replaces XS200

Installation Details INXS200 Installation instructions



Customer Satisfaction Score:


Customer Reviews

Inno Flush Feet for Aero Crossbars - Naked Roofs - Qty 4 - INXS200

Average Customer Rating:  4.8 out of 5 stars   (83 Customer Reviews)

These Flush feet help you mount 2 Inno Aero crossbars to your vehicle's naked roof to create a roof rack with a streamlined look. Hand knobs tighten feet in place on your roof. Locking covers secure system to roof.

by:
2017 Ford Edge

By far the best service I have received in a very long time. I recieved my inno flush feet areo crossbars, sooner than expected and the assembly was just as specified. I especially liked having the video with the tutorial.
I like the look of the low profile and the quality is outstanding. I have used this for my kayak and the low profile helps with the loading and unloading.
I would highly recommend this product and Company.



by:
2016 Nissan Juke

Thank you etrailer my car looks great I spent 4 hours to ensemble this cross bar and the bask rack but finally I made it now I have more cargo space in my car I really recommend etrailer good quality items and good service thanks again



by:

Great product and figment, the service was great as well, the only suggestion I have is if there is a product that cannot be shipped to Canada it should be told when you try to order it, however the follow up call was appreciated .

Steve

7/11/2018

The racks are working as expected, bikes and Thule box in the summer and ski holders in the winter



by:

I bought these last summer to affix my kayaks to the roof of my corola. my husband, who is decidedly not a handy person, installed them in an hour and they've been great. no issues– slight whistling at times on the interstate, but that's to be expected. highly recommend!



by:

Great profile. Looks good on truck.
Locking
and unlocking very easy.



by:

2016 Golf R MK7

Love it so far



by:
2012 Lexus RX 450h

Easy and worked well with the total kit for our vehicle. Feel sturdy and strong. We’re happy with them.



by:

Shipping and packaging was very good and delivered on time!
Love the flush bar look!



by:
1999 Volkswagen Golf

Easy install, build quality is really nice as is fit and finish. Almost no wind noise at highway speed.



by:

The roof rack arrived days before it was scheduled to. Everything ordered arrived intact. Assembly and installation were pretty easy per the directions included and the video on the etrailer site. The rack looks fine on my Maxda CX5 and the additional noise from the rack is not too bad. Haven't had my cargo box on the rack yet but anticipate no problems with it. My experience with etrailer has been first rate.



by:
Fiat

I bought this for my 2016 Fiat 500X which has two glass sunroofs, and it fits perfectly! Follow the directions, put the bars where it says to, and your glass will be safe. You can't open the sunroof while this is in place, but hey, at least you can haul gear on your roof without breaking the glass.



by:
2000 Ford Edge

Everything about this kit met my expectations.
-
Perfect fit for my Ford Edge, as advertised.
- Lowest bar height that was still high enough for the Edge Vista roof to clear. The glass does clear when nothing is attached to the bars.
- Aero bar shape. I haven't done a lot of miles yet with only the bars and no other attachments.

I attached an Inno roof box (which still fits through my garage door!) and did a 2000 mile road trip at insterstate speeds. Except the box noise (expected), and a bit of a mileage hit, I had no issues. Secure fit the whole way.



by:

I like that the feet don't extend too much beyond the width of the vehicle (2012 Toyota Prius V). No noticeable wind noise or fuel economy change. They held two bikes just fine. The tightening process feels very secure, but took me a while to do. I wasn't in a hurry so it was fine.



by:
Honda

I bought the whole kit for 2008 honda fit for a cross-country trip, and it performed great. Made it with two surfboards on top with no problems. Instructions for installation are atrocious, but youtube videos can fill in the gaps. Shipping was quick. I didn't use any of the customer service options, but it seems like they would be useful if needed.



by:

The Inno racks have handled an assortment of different loads without problems. They are quiet at highway speeds. The lack of tie down points are the only drawback with these racks.



by:

Easy to install ony mini



by:



by:

Josh is the greatest! Thanks for all the help!



by:

These are really aero dynamic with a sleek design. It doesn’t cause a lot of of air drag like the super known brand.



by:

fast shipping, great customer service, and easy to install



by:

Heavy duty and well designed feet. Love the locking feature, and instructions were clear.



by:

Perfect roof rack for my car.



by:



by:

Works great



by:


25
83
Show More Reviews

See what our Experts say about this Inno Roof Rack

  • Roof Rack and Kayak Carrier for 2018 Ram 1500 Crew Cab
    First thing you'll need to install a roof rack on your 2018 Ram 1500 crew cab like the Inno part numbers # INXB130-2, # INXS200, and # INK653 which is a confirmed fit so that you can mount a kayak carrier like the Thule Hull-A-Port XT part # TH849000 which would work great to carry a 12 foot kayak like you mentioned.
    view full answer...
  • Does INNO Roof Rack For 2018 Subaru Legacy Work with Sunroof
    For your 2018 Subaru Legacy with a sunroof the Inno Roof Rack part # INXB115-2, # INXS200, and # INK439 is a confirmed fit and will work well. You won't want to open your sunroof with the rack installed though as there will be quite a bit of wind noise created.
    view full answer...
  • Rhino-Rack Roof Rack for 2009 Chevy Uplander
    If your 2009 Chevy Uplander is equipped with factory raised rails that run front to back on the roof then we do have the Rhino-Rack Vortex Roof Rack System that consists of # RRVA118B-2 for the two 46 inch Vortex Aero Crossbars in Black or # RRVA118S-2 for Silver and # RRSX100 for the SX Series Legs. This is a sleek, aerodynamic system that will provide you with a quiet ride and a weight capacity of 165 pounds. I have attached a video review that you can check out as well. If your Uplander...
    view full answer...
  • Which Roof Rack Will Fit A 1999 Toyota Corolla
    The Yakima roof rack that will fit your 1999 Toyota Corolla is the Inno Aero Crossbars # INXB100-2, Inno Flush Feet # INXS200, Custom Fit Kit # INK134. This rack is a solid foundation for anything you'll be carrying and is compatible with your Corolla. Anytime you are going to be carrying cargo on your roof you will want to check your owners manual or with the Toyota dealer on what the weight capacity is on the roof of your vehicle. You will need to go by the lowest rated component in...
    view full answer...
  • Recommended Roof Rack and Track System for Truck Topper to Carry Canoe on 2012 Toyota Tundra CrewMax
    We can get you the parts needed to install a roof rack on your truck topper so you can haul your canoe. There are advantages to systems in regards to quality and value, and for your application the best fit is from Rhino-Rack, who is known for their quality, which is consistent with other brands, but often not with as high a price tag. What I recommend is: - Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount # Y02-490B This will give you 59 inch crossbars on your camper shell,...
    view full answer...
  • Roof Rack for 2022 Chevy Traverse with Naked Roof
    For your 2022 Chevy Traverse that has a naked roof we have the Inno roof rack part numbers # INXB123-2, # INXS200, and # IN63FR which would work great. It clamps around the door frame so it's pretty easy to install and remove as well. It would be great for a temporary install or to be left on for a decent amount of time. The bars are aero shaped too which means there would be minimized wind noise.
    view full answer...
  • Parts Needed to Install a Roof Mount Luggage Rack on a 1999 Toyota Corolla 4 Door Sedan
    For a roof rack on your 1999 Toyota Corolla I recommend the Inno roof rack consisting of: Inno Aero Crossbars - Aluminum - Black - 39" Long # INXB100-2 Inno Flush Feet f# INXS200 Custom Fit Kit # INK134 These parts are easy to remove and install after initial installation and should not cause any damage to the car when properly installed using the manufacturers instructions. Once you have the roof rack installed, you can use a roof cargo box to carry your luggage. I recommend the Thule...
    view full answer...
  • Inno Roof Rack Recommendation for 2008 Toyota Prius
    The Inno Aero Bar Roof Rack part # INXB108-2, # INXS200, and # INK705 is a great option for your 2008 Toyota Prius. It does come with locks and also the aero shaped bars help minimize wind noise. This rack does install using door clamps and the feet then rest on rubber pads on the roof of your vehicle. Over time these racks hold up just fine. I'd periodically remove the feet and clean them and the vehicle paint to prevent any scratching but even that is really unlikely. Value wise this...
    view full answer...
    Image 1 for
  • Roof Rack Options For 2020 Lexus RX 350 With Panoramic Glass Sunroof
    If your Lexus has flush mounted rails that run back and forth on the roof, I recommend to use the Thule WingBar Evo Aluminum Crossbars part # TH711200 with the feet part # TH710601 and fit kit part # TH186044 for the 2020 Lexus RX350 F sport with panoramic roof. This rack does fit with the panoramic roof however Thule recommends that you do not open the glass roof when the rack is installed because it will damage the roof, the accessories on the rack and create a lot of wind noise. The...
    view full answer...
  • Difference Between Inno Roof Racks that Fit 2011 Honda Insight
    Different crossbar lengths for vehicles like your 2011 Honda Insight are available to give people more options. Some prefer longer bars to try and fit as much as they can on the roof and some prefer shorter for sleeker look or to minimize wind noise. Now there are two basic styles of Inno racks for your vehicle. The flush bars that are shorter (42 inch) which the bars do not extend past the feet of the rack and through bars that have the bars that extend past the feet. The flush bar option...
    view full answer...
  • Can I Put A Trailer Hitch On A 2018 Lexus 450H L
    At this time we do not currently have a trailer hitch confirmed for your 2018 Lexus 450H L. If you were going to use the hitch for hauling bikes you could use The SeaSucker Hornet Rear Window Bike Rack for 1 Bike - Handlebar Mount - Vacuum Cup Mounted # 298-BH1302. The carrier installs in seconds with vacuum cups that won't scratch or dent your Lexus RX 450h L. Stores in your trunk or luggage when not in use. It has a weight capacity of 35 pounds, and has a pull strength of 120 pounds per...
    view full answer...
  • Quiet Roof Rack and Kayak Carrier for a 2012 Honda Civic with Moonroof
    It sounds like your 2012 Honda Civic has the moonroof option. There are indeed roof racks that will fit! If you have a 4-door Civic then I recommend Rhino-Rack roof rack # RR32MR. Both of these roof racks feature aero bars, which will be the quietest, and feet integrated into the ends of the bars which creates less drag, and thus noise, than other styles. Any roof rack will make noise but the style of the above racks will make the least noise. If you have a 2-door there are no notes or...
    view full answer...
  • Roof Rack and Roof Mount Bike Carrier Recommendation for 2004 Ford Freestar
    In order to carry two bikes on the roof of your 2004 Ford Freestar, you will want a roof rack, as well as two roof mount bike carriers. I recommend the Inno Aero roof rack. It consists of the Inno Aero Crossbars # INXB115-2 Inno Flush Feet # INXS200, and Custom Fit Kit # INK211. This is a confirmed fit for your vehicle. For a roof mount bike rack carrier I recommend the Yakima FrontLoader Wheel Mount Bike Carrier # Y02103. This rack will fit your Yakima crossbars and support bikes...
    view full answer...
  • Roof Rack Recommendation for a 2010 Toyota Matrix
    For your 2010 Toyota Matrix I have a solution for you, but a rack from a 2014 Corolla would not be it. The best priced system that would work great is the Inno part # INXB85-2, # INXS200, and # INK244 which is a confirmed fit. This will give you an OEM looking roof rack as the bars of the system do not extend past the feet.
    view full answer...
  • Roof Rack and Bike Rack for 2019 Honda Civic
    Yes! The Inno Roof Rack Fit Kit for 2019 Honda Civic # INXB108-2, # INXS200, and # INK684 is a great roof rack. Even if you did not link it in your question, this would have been my first suggestion for how it meets your specific needs: not damaging for the car, good for long distances, durable, and cost-effective. The clamps # INK684 are fitted for each specific vehicle model so, if installed correctly, will fit into the grooves in a way that will NOT damage your car. I often purposely...
    view full answer...
  • Lowest Profile Roof Rack for a 2016 Audi A6 Sedan
    The lowest profile roof rack for a 2016 Audi A6 Sedan is the Inno Aero Crossbar System part # INXB100-108, part # INXS200, and part # INK412. This system sits about 3-1/2" to 4" from the roof to the top of the crossbar but it is hard to get exact measurements due to all the different roof shapes. I have attached a photo of the Inno Aero Crossbar System installed on a different vehicle that way you can get a better feel for how tall it is.
    view full answer...
    Image 1 for
  • Roof Rack Recommendation for 2016 Fiat 500X with Smooth Roof
    There is a great option for a roof rack from Inno, who is also the only manufacturer that makes a rack which fits your 2016 Fiat 500X with a naked roof. This will give your 500X a low-profile, sleek and durable roof rack that can carry all kinds of gear. The rack consists of: - Inno Aero Crossbars # INXB100-108 - Inno Flush Feet # INXS200 - Custom Fit Kit # INK482 As you can see by the accompanying photo of this roof rack on a 2016 Fiat 500X the Inno's crossbars fit the exact width of...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Roof Rack for a 2005 Toyota Tacoma Access Cab
    I have a solution for you but the Rhino-Rack ROC25 Roof Rack item # RR62VR does not fit the access cab model of your 2005 Toyota Tacoma. It only works for the regular cab. The best option for factory look aero crossbars that do not stick out from the sides is the 2005 Toyota Tacoma Roof Rack by Inno. This roof rack includes the following parts: Inno Aero Crossbars - Aluminum - Black - 45" Long - Qty 2 item # INXB115-2 Inno Flush Feet for Aero Crossbars - Naked Roofs - Qty 4 item # INXS200 Custom...
    view full answer...
  • Measuring the Front and Rear Bar Stay Dimensions for Inno Roof Rack on 2009 Scion xB
    I have the exact measurements to fit the Inno Roof Rack with part numbers # INXB153-2 (or # INXB123-2), # INXS250 ( or # INXS200), and # INK300 on your 2009 Scion xB. It sounds like the confusion comes from how there are different install instructions for the different parts and they must be used simultaneously. What will help you out here is the install guide for your fit kit # INK300. These are the clamps and pads that were designed specifically for your 2009 Scion xB. What you're looking...
    view full answer...
  • Thule Flush Mount Roof Rack For 2005 Toyota Prius
    The Thule AeroBlade roof rack has been discontinued and replaced by the WingBar Edge, so there isn't a fit kit for those crossbars for your 2005 Toyota Prius. If you'd like a Thule flush mount roof rack for your '05 Prius you can use the Edge, which consists of Thule WingBar Edge Crossbar - Silver # TH23RE or Black # TH56FE, Edge Clamp Feet # TH79SC, and Fit Kit for Thule Evo Clamp and Edge Clamp Roof Rack Feet # TH145181. This is a premium option so if you'd like something that is still...
    view full answer...
  • Recommended Roof Rack for a 2015 Honda Civic Coupe
    The Inno Aero Crossbar System part # INXB108-115, part # INXS200, and part # INK642 is a great cost effective option for a 2015 Honda Civic Coupe and what I recommend using. In fact, it is the most cost effective option we have with the aero shaped crossbars. It also has a very sleek design since the crossbars don't extend past the mounting feet. I have attached a full list of options below.
    view full answer...
  • Front Fairing that Lines up with the Windshield for a 2005 Toyota 4 Runner
    You can mount a single roof bar, but you'll end up with extra parts because of the fits available for your vehicle. For your application, I recommend the following kit: - 45 inch long Inno Aero Crossbar, part # INXB115 - Flush Feet for Aero Crossbars, part # INXS200 - Roof Rack Feet, part # INK784 This will provide you with a front roof bar for your 2005 Toyota 4Runner. For a fairing, you'll want the Inno Fairing, part # INA262. This is sized to your new front crossbar and will provide...
    view full answer...
  • Can I Safely Use a Roofnest Rooftop Tent on 2014 Toyota Prius with Inno Aero Crossbars
    Thanks for reaching out and for your purchase of the Inno roof rack kit for your 2014 Toyota Prius: 39" and 42" Crossbars - # INXB100-108 Flush Feet - # INXS200 Fit Kit - # INK865 I reached out to Roofnest to clarify what they meant by those specs and my contact said that 30" measurement for them is from the front of the front crossbar to the back of the back crossbar. Since the Inno aero crossbars are 3-1/8" wide that extra spacing for them puts them right at that 30" spacing so this...
    view full answer...
  • What Is The Best Way To Carry Bikes On A 2013 Toyota Rav4 EV
    I do have a roof rack option for you, however, you will not be able to use the Thule crossbars on your 1997 Toyota 4-Runner as they are not compatible with the EV models. In order to install a roof rack on your vehicle, you will need the Malone AirFlow2 Universal Roof Rack part # MPG215 for models with factory side rails or the Inno Aero Crossbar System part # INXB108-115, part # INXS200, and part # INK329 for models without factory side rails. Regardless of which roof rack option you go...
    view full answer...


< Previous
123. . .5



Do you have a question about this Roof Rack?


Used Items Available
Used Picture for Inno Flush Feet for Aero Crossbars - Naked Roofs - Qty 4

Condition: Installed

Notes: Item has been installed/test fit.

Our Price: $132.35
Add to Cart
Secure Checkout

Info for this part was:

Employee Zack K
Video by:
Zack K
Employee Andrew K
Video by:
Andrew K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael B
Video by:
Michael B
Employee Aidan B
Video by:
Aidan B
Employee John S
Video by:
John S
Employee Charles A
Video by:
Charles A
Employee Ethan H
Video by:
Ethan H
Employee Tyler C
Written by:
Tyler C
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video Edited:
Zach D
Employee Lisa S
Updated by:
Lisa S
Employee Wilson B
Updated by:
Wilson B
Employee Ronnie R
Updated by:
Ronnie R
Employee Alex H
Updated by:
Alex H
Employee Manda E
Updated by:
Manda E
Employee Hayden R
Test Fit:
Hayden R
Employee Savanna B
Test Fit:
Savanna B
Employee Evangeline M
Test Fit:
Evangeline M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.