bing tracking image
  1. RV and Camper Bike Racks
  2. Surco Products
  3. RV Ladder Rack
  4. Motorhome
  5. Travel Trailer
  6. Fifth Wheel
Surco 2 Bike Carrier for Vans and RVs - Ladder Mount

Surco 2 Bike Carrier for Vans and RVs - Ladder Mount

Item # SP501BR
Retail:$171.12
Our Price: $137.17
You Save: $33.95
RV and Camper Bike Racks
Shipping Weight: 5 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me
The arms of this unique bike rack attach to any RV or van ladder that has 1" diameter vertical support rails. Pivoting design allows for full use of ladder when bikes are not mounted. Durable, lightweight aluminum is sturdy and rustproof. Great Prices for the best rv and camper bike racks from Surco Products. Surco 2 Bike Carrier for Vans and RVs - Ladder Mount part number SP501BR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (151)
  • Q & A (0)
  • Photos

Surco Products RV and Camper Bike Racks - SP501BR

  • RV Ladder Rack
  • Motorhome
  • Travel Trailer
  • Fifth Wheel
  • 2 Bikes
  • Road Bikes
  • Womens Bikes
  • Hanging Rack
  • Frame Mount
  • Surco Products
  • Locks Not Included

The arms of this unique bike rack attach to any RV or van ladder that has 1" diameter vertical support rails. Pivoting design allows for full use of ladder when bikes are not mounted. Durable, lightweight aluminum is sturdy and rustproof.


Features:

  • Rack attaches to vertical support bars on almost any van or motor home ladder
    • Brackets clamp around 1" diameter tubing - no straps necessary
  • Arms mount individually to either side of ladder - spread depends on width of ladder
    • Arms pivot for full access to your ladder when bikes are not mounted
      • Pull pin out of top bracket to move arm
      • Replace pin to secure arm in place
  • Bikes sit vertically - seat posts attach to cradles
    • Rack holds up to 2 bikes
  • Cushioned, rubber cradles have flexible straps to keep bikes in place
    • Lock bikes to the rack and to your ladder with a cable lock (sold separately)
  • Lightweight, heavy-gauge aluminum construction is durable and rustproof
    • Bright-dipped, polished finish
  • Capacity: 75 lbs
  • Made in USA
  • 90-Day warranty


Surco Ladder-Mounted Bike Rack

Surco's ladder-mounted bike rack attaches to the vertical supports of your RV's ladder instead of to its rungs so that it can fit a wider variety of applications. In addition, the rack arms have a unique, built-in pivot feature that lets you swing them away from the ladder. Now you can maintain complete access to your ladder - as long as no bikes are mounted at the time - with no need to remove the rack.


Surco Ladder-Mounted Bike Rack Swing Away

To pivot the arms of your rack to the side, simply remove the pull pins from the top brackets of each arm, swing the arms out and replace the pins to secure. Now you have full use of your van or motor home ladder. To use the rack, pivot the arms back and secure them in place in the same manner.


Surco Ladder-Mounted Bike Rack Clamps

The arms of the rack attach to the ladder supports with sturdy, secure clamps that hold the rack firmly in place, eliminating the bouncing and jostling that can occur with racks that simply hook onto your ladder. Just attach the arms, individually, to the 1-inch-diameter posts of your ladder, and you're good to go.



501BR Surco Ladder-Mounted Bike Carrier





Customer Satisfaction Score:


Customer Reviews

Surco 2 Bike Carrier for Vans and RVs - Ladder Mount - SP501BR

Average Customer Rating:  4.3 out of 5 stars   (151 Customer Reviews)

The arms of this unique bike rack attach to any RV or van ladder that has 1" diameter vertical support rails. Pivoting design allows for full use of ladder when bikes are not mounted. Durable, lightweight aluminum is sturdy and rustproof.

by:

This carrier works very well for those situations where a ladder-mounted bike rack is the only option. It took a couple of trials to find the best placement of the bikes on the rack. It would be ideal if the horizontal bars were a little longer so the bikes could be kept further away from the back wall of the travel trailer and separated a little more from each other. Nevertheless this rack works well and I use cut pool noodles and bungies to hold the bikes firmly in position and to guard the contact locations between the bikes, rack and trailer. The cradles can be slid anywhere on the horizontal bar for ideal placement with your specific bikes. It would be good if there was way to hold them in place so they don't move while mounting the bikes or after install. Based on the few times we have used this rack, I would recommend it in a ladder-mounted application.

Vwagner

6/19/2022

Excellent! I now can attach and secure the bikes in under 10 minutes. It would still be ideal if the horizontal bars were a little longer so the bikes could be kept further away from the back wall of the travel trailer and separated a little more from each other. Nevertheless this rack works well and I use cut pool noodles and bungies to hold the bikes firmly in position and to guard the contact locations between the bikes, the rack and the trailer. The cradles can be slid anywhere on the horizontal bar for ideal placement with your specific bikes. It would be good if there was way to hold them in place so they dont move while mounting the bikes and after install. Based on a year of use, I would recommend it in a ladder-mounted application.



by:

The bicycle carrier has been great and its design well thought out. Due to the geometry of our bicycles it took us a while the two times to figure out how to hang them with the best balance and minimal overhang with the side of our trailer. Easy to use thereafter, very sturdy and no maintenance.

Glenn

2/17/2024

I have used the rack for over 16000 miles carrying 2 bicycles. It’s been sturdy and there have been no problems. Takes some time to secure bikes and would buy it again.



by:

Pretty Hoakey ! Bikes are 35lbs. Each. In order to clamp bikes on carrier as instructed it bends the chain derailer. Do you cover camper damage & how is your money back guarantee ? Not really impressed.



by:

Did not work on my bikes, tried to return it unused. erailer would not take it back. Not a good purchase at all, do not recommend.



by:

We needed a way to carry a 30 lb steel folding dog fence without having to modify our rv. We rejected the idea of anything that would attach to the tow hitch so that we retained the option of a dingy.
The rack installed easily and after some slight modifications to the dog fence, we were able to load it up and strap it down. We drove 4600 miles on all types of terrain and nothing moved.
We are so pleased with this product.



by:

Arms bent driving down i10 in Texas
Lucky
I had a cargo stap!
Can’t recommend

Etrailer Expert

Heather A.

8/23/2022

Thank you for the photos Abraham. Please keep in mind the weight capacity of the rack is 70 lbs. It looks like the ladder on your RV is shaped a bit differently compared to the ladders we used during our install video. The clamps of the rack should rest on top of the ladder rungs.



by:

I recieved the Surco 2 Bike Carrier Ladder Mount #SP501BR today and had no problems attaching to the Ladder on my Wolf Creek Truck Camper. The bike mounts easily and is secure. I may have to fine tune the mounting to adjust the bike so it doesn't hang out the right side so much. Also, when locked in the storage position the inner rack blocks the door. Perhaps another pin housing could be added to allow the inner rack to swing to the right and be locked out of the way. Otherwise I am a "Happy Camper" and would recommend this device to other Truck Campers to carry their bicycles with them.



by:

We have a large tandem that actually fits on the back of the trailer. Awesome product!



by:

Did not hold up long using 2 kids bikes, we travel full time in our camper and it was about 2 months when the holding mechanism stopped working and another vehicle waved us down to let us know we were about to lose our bike. We have been able to keep using it for 1 kids hike but had to add a rear hitch bike rack for another bike.

Etrailer Expert

Katrina B.

3/3/2023

This has a capacity of 75lbs, so we will need to make sure you are not overloading this rack. Can you send me a picture of how the rack is mounted and how the bikes are mounted on the rack?



by:

I was able to install and use the bike rack on my RV ladder for 6 months. My only complaint about the product is that the rack itself began to bend over time, in spite of the fact that the weight of my two bicycles was below the limit advertised by the manufacturer. I have attached a picture that shows how the right side of the rack sagged over time, which makes me worry a little bit about using the rack going forward.



by:

The product looks to be constructed very well with good materials that won't rust. I read a review about someone's experience of having the bar bend down after use. This essentially happened to me on my first use. I mounted the bars as directed, and for my first trip with my 40' fifth wheel RV, I placed two Trek mountain bikes on the cradles and strapped them in with the short rubber straps. I used the one enclosed fiber strap as an additional tie down. I also had two U-joint bike locks of which one I could lock through the RV ladder, but the second one I had to settle on locking bike-to-bike. I got on the road, and about one hour into the trip, a kind soul gave me hand signals to let me know my bikes weren't doing well. I pulled over and inspected. One of the mounts on the right L-bar had managed to slip over a screw stop and fell off the L-bar. That bike held on to the RV ladder by the fiber strap and the U-lock. Fortunately, the bike didn't make contact with the ground. I later figured out that I should or could have tighten down the four mounts on the L-bars. They were pretty snug on the L-bar, but I thought they would be fine, and stopped by the end cap. But that end cap screw isn't very big. Also, the incident caused about a 1" bend downward on the right L-bar that I bent back into place. When I bring my RV back to home on my next trip, I'll make sure that I have a second strap for extra security and holding power on the RV ladder. I already tightened the mounts on the L-bar. I don't believe the directions that came with the bike rack talked about tightening the mounts, but make sure you do tighten them down! (That was my biggest mistake) The pins on top of the rack are very tight when you try to lock them into their receptacles. You probably will need a hammer to tap them in/out. There is a 70 lb limit for the rack, and was probably approaching the limit with my two mountain bikes. Sorry, no pics this time. I'll try to include pics the next time I'm out with my RV.

Bradley D.

10/1/2020

Same problem still. I only put one bike on the rack at a time now.



by:

Works great oh the back of my RV, will need a motorcycle tie down to secure it from swinging but overall ... a great product. This has been from MI to FL and back 2 times.



by:

I love this rack. It is very strong as advertised. I carry my Aventon Pace 500 Ebike on this rack - it is perfect.



by:

I tried to use this carrier 1x and the bikes hit the camper and scratched my camper I dont not recommend this item and would like a refund



by:

As the seat posts tubing is too short to mount onto the carrier, I had to settle on nesting the bikes on the horizontal tube between the seat post and the handlebars. This in itself, lends itself to having to remove the tires and wheels off the bike during transportation. Also, as I am an engineer, I did not feel comfortable with only 3/16 thread engagement in aluminum for a 1/4-20 bolt. Typically, the standard thread engagement would be 150-200% deep based upon the diameter of the screw. Therefore, I replaced the shorter 1/4-20 x 1/2" screw with a Stainless steel 1/4-20 x 3/4" socket head and once fulling engaged and positioned correctly, I installed a 1/4-20 Stainless Steel Lock-Nut to ensure full engagement on the threads to prevent backing off or stripping of the aluminum threads due to stresses during travel, leading to loss of bikes while under transportation, potentially eliminating or significantly reducing injury to other travelers on the highway or pedestrians. Overall cost for upgrading 8 fasteners, around $20.



by:

Used it in combination with half of a bumper mounted rack which supported the front wheels. Eliminated bouncing. Easy to mount.



by:

I purchased this rack after spending considerable time on the phone with the eTrailer.com rep. She was very knowledgeable about all types of racks, including hitch and ladder racks. I might have gotten this rack for a few bucks cheaper on eBay, but the support from the rep more than makes up for that!

The rack went on easily, although it was help to have a second pair of hands to hold the clamp during installation. The only problem I had was installing the two rack pieces in reverse. I wasn't aware until after I tried to pivot the rack off to the side that there was a definite left and right side. I don't think I saw anything about this in the instructions. But luckily, it was easy to remove and reinstall them on the correct sides.

Our bikes (Trek) fit fine, although we had to remove my husband's water bottle cage, because it was installed on the vertical part of the frame where the bike rests on the rack. We reinstalled it on the diagonal part of the frame (as in product photo), where it doesn't interfere with the rack.

We'll be heading out soon with our bikes on the rack and don't anticipate any problems.

Deb N.

4/10/2014

Thanks for the follow up. We used the rack a few times and it worked fine. However, we have since sold the RV it was attached to and left it on the rig for the new owners to enjoy.



by:

This rack performs as advertised. It fit our trailer's rear ladder just fine and holds our two heavy bicycles without problems. The arms swing aside as needed to make the ladder accessible. I do add some additional cushioning material (large rags) to keep the bicycles from rubbing each other's paint off and to keep them from touching the camper finish.....but I think that is necessary with about any bike rack that suffers the up and down and side to side motion that the rear of a 23 foot trailer creates. It is no problem and works fine. Our bicycles are full-size adult bikes and we cannot hang them vertically, so have to hang them horizontally, which makes them a bit more susceptible to trailer pitch, roll, and yaw movements. But the rack holds them securely.

D. H.

12/1/2020

It continues to serve us well. It is important to recognize the weight limit posted for the product, but within that range it does great.



by:

Simple installation and simple to secure bikes.



by:

Product design is good, the build quality very lacking. There were many sharp burrs on the aluminum pieces that required filing and deburring. The tapped holes were very poorly executed and required me to run a tap through them before they would accept a bolt. The holes the pins slide through to hold the arms in position were several thousands of an inch too small for the pins to fit. I had to ream these holes in order for the pins to fit. The bolts to attach the arms aren't really long enough for the job. I followed another suggestion and bought longer bolts and lock nuts rather than trust the threaded aluminum pieces to hold up while travelling down the road. Frankly I would have a hard time recommending this product.



by:

This bike rack was very easy to install on our motorhome and it holds our two bikes very nicely and securely. It does not interfere at all with the vehicle we tow on a car dolly behind the motorhome. Have been on several trips with it already and no problems have occurred. We also received it within days of placing our order.

Chas J.

9/13/2017

Great. No negative issues. Easy to install and works just like we had anticipated.



by:

This bike rack was a good buy. It holds our two bikes securely and is a lot quicker to load and unload than racks we've had in the past. It only holds two bikes, but that is all the weight that you ought to have on an rv ladder.

Carl P.

8/15/2020

The carrier has performed as expected and I have been very satisfied. Transferred it to another motorhome we just bought, and it went on without any problems.



by:

Just returned from a 3300 mile trip out west. We took two of our 4 bicycles on the ladder rack without any problems at all. The only ‘negative’ was that I could not align the lock pin to completely pin in place. However, with only the tip of the pin in the lock tube, the arm was stable. Performed great over many rough rough miles. Highly recommend

Etrailer Expert

Sierra K.

6/8/2021

Thank you for your reply. Here is a video explaining the easiest way to pin the rack: It shows it at the 0:47 mark. If they are still sticking, you may need some lubricant, like WD40. Please take the rack off when not in use as long exposure outside can rust inside the pin holes.



by:

So far have only installed the unit and found that it installed easily as described by etrailer and is of good quality. I am looking forward to using it on my next trip when I can better assess its usefulness and ongoing quality.

Bob S.

10/24/2016

I have used the bike carrier multiple times in the past year including a 5 week road trip. It has held the two bikes I carry very securely and it was easy to get the bikes on and off. Overall very pleased with this product.



by:

The bike rack worked pretty well. We drove 15,000 miles with it attached to the back of our truck camper and two bikes on it with no real problems. You will need to add a bungee to snug things up.

Kb

10/25/2017

It still works ok a year later. I would recommend it again. Might need a leather man to stretc the rubber tie down in cold weather.


25
151
Show More Reviews

See what our Experts say about this Surco Products RV and Camper Bike Racks

  • Bike & Cargo Carrier Options for Use on Winnebago View 24V Class B+ RV
    It is generally a better idea to use a hitch receiver to support a heavy load. Lightweight ladder-mount RV bike racks are available for up to 2 bikes, such as the Surco 2 Bike Carrier # SP501BR, but if you can use hitch-mount carriers that place the load on the vehicle frame you are better off. Have a look at the safety sticker on your RV hitch. There should be a tongue weight capacity listed on it. This is important to know since that TW figure is the maximum weight load you can use on...
    view full answer...
  • RV Ladder Bike Rack or Spare Tire Bike Rack on Tow Vehicle
    Choosing between a spare tire bike rack like the Thule Spare Me 2 Bike Rack # TH963PRO for your Jeep or an RV ladder bike rack will really be up to your personal preference. An RV ladder rack like the Surco 2 Bike Carrier # SP501BR may offer more convenience for loading and unloading your bikes when compared to a rack that mounts between your Jeep and RV. This particular carrier can transport up to 2 bikes with a total weight of 75 pounds. It has a dual-arm design which will provide great...
    view full answer...
  • Determining The Correct E-Bike Bike Rack For A Small Travel Trailer
    Most e-bikes are pretty heavy so the racks that are capable of hauling them tend to only be trailer hitch mounted. Most tongue mounted bike racks max out around 35-40lbs per bike so you'd likely be well over the weight limit. Hitch mounted bike racks have a bit more support and can range up to 80lbs per bike. You'll also need to check if the bike rack is rated for use on travel trailers because the suspension of the trailer is less sophisticated and can be too rough on the rack and cause...
    view full answer...
  • Bike and Spare Tire Carrier Recommendation for a 2002 Damon Daybreak RV
    There might be a way to put a bike rack and a spare tire on the back of your 2002 Damon Daybreak RV, but the Curt Trailer Cargo Control, part # C31006, is not designed or rated to have the additional weight of a bike rack and bicycles on it, so it would not be a good option to go that route. I would recommend you use the # C31006 to carry the spare tire and then RV Ladder Bike Rack like part # SP501BR to carry the bikes.
    view full answer...
  • RV Ladder Bike Rack Options For Two Lightweight Bikes
    The Stromberg Carlson 2-Bike Carrier for RVs # LA-102 is an excellent option! This bike rack can hole up to two bikes weighing 25-lbs each, which since you mentioned you have some pretty light weight bikes, would work for you. However, if you needed a rack that has quite a bit more capacity, the: -Surco 2 Bike Carrier for Vans and RVs # SP501BR is also a great choice that still offers a 2-bike capacity, but a much higher maximum weight capacity of 75-lbs.
    view full answer...
  • Mounting Bikes on Surco Ladder-Mount RV Bike Rack SP501BR
    Since most RV ladders are mounted on one side or the other (rather than in the center) it is likely that parts of your bikes could extend out beyond the sides of the RV if they were installed horizontally on the Surco 2 Bike Carrier # SP501BR. It is possible that in some specific circumstances a small child's bike, for example, might be mounted horizontally on such a ladder-mounted bike rack but this is unlikely to be the case with any adult bike. You want to ensure that the loaded bikes...
    view full answer...
  • RV-Approved 2-Bike Platform Style Bike Rack for Use on Trailer
    Any bike rack that is intended for use on the rear of a trailer or motorhome must be built extra-strong to withstand the powerful vertical and lateral forces found at the rear of such vehicles. The extra forces come about as a result of the longer distance from the rear axle to the rack on such vehicles. We do offer a wide range of RV-rated bike carriers that you can see by clicking on the included link. These RV bike racks include hitch-mount types like the # Y36FR, ladder-mount racks...
    view full answer...
  • Recommendations For Carrying 6 Bikes On Back Of 2015 Coachmen Catalina Travel Trailer
    We do offer a 4-bike carrier for the back of an RV or camper. It is the Swagman 4 Bike Carrier, part # S80600. This bike rack does require that the bumper is a continuous welded steel square bumper is between 4 and 4-1/2 inches wide. Aluminum or spot-welded bumpers are not an option for this bike rack. The bike rack does limit the weight of each bike to 30 lbs. If you have the room, you may be able to also use a ladder-mount bike carrier like part # SP501BR. This will work with any ladder...
    view full answer...
  • Weight Capacity and Mounting Configuration of Surco Ladder Mount 2 Bike Rack Part # SP501BR
    The Surco RV Ladder Mounted Bike Rack you referenced attaches to the uprights of the ladder, not the rungs. As long as your uprights have a round profile, the ladder bike rack will fit regardless of the profile of the rungs. I have edited a photo for you that shows this. As long as the ladder is not right at the edge of the 5th wheel, the fact that the ladder is on the drivers side should present no problem. The rack itself has a weight capacity of 75 lbs, which might work for you if you...
    view full answer...
    Image 1 for
  • Recommended Bike Rack for RV Ladder with Larger Steps
    I recommend the Surco 2 Bike Carrier # SP501BR that attaches to the vertical side tubing of the ladder and not the rungs/steps. As long as your ladder features 1" diameter tubing it will work perfectly. I have attached a short video demonstration that you can check out as well.
    view full answer...
  • Could Bike Install Horizontally on Surco Ladder Rack
    There's really no reason you couldn't mount a bike horizontally on the Surco Ladder rack part # SP501BR as it is set up just like a standard hanging bike rack. Since you said the bike is small you are going to want an adapter bar though like part # UB01 to attach to the seat post and steering stem as that's the only way it will fit the bike frame. Check out the install vid I attached.
    view full answer...
    Image 1 for
  • Surco RV Ladder Bike Rack Bicycle Cover
    I have a possible solution for you, but there isn't a directly designed cover for the Surco Bike Racks, part # SP501BR. The Swagman Bike Cover for RVs # S24FR will be the best option. It has a sturdy design but may need some modification to adjust to the vertical orientation of the Surco Bike Ladder Rack as I don't believe the flap and hole from the manufacturer will fit perfectly. You'll need to make sure that you install with the rear wheel first because you'll need to slip over and...
    view full answer...
  • Recommendation For 10 Inch Drop Ball Mount For Towing Dolly And Bike Rack For RV
    The Convert-A-Ball Ball Mount With 10 inch Drop, Item # AMSC10, should work well for you. It has an overall shank length of 15-1/2 inches. A key measurement for your project will also be from center of hitch pin hole to nearest part of the drop which is approximately 4-1/4 inches (see picture). This amount can vary slightly depending on the welds. I called the manufacturer and the Swagman Traveler Rack, Item # S64664, might work with the Convert-A-Ball Mount but you must have at least...
    view full answer...
    Image 1 for
  • Solution For Carrying 4 Or 5 Bikes On The Back Of A Travel Trailer
    The Swagman XP - Folding 5 Bike Rack for 2" Trailer Hitches # S64970 is not built heavy duty enough to withstand the excess bouncing and stress placed on the carrier when mounted at the back of a travel trailer or 5th wheel trailer. The 5-bike version is too much weight for the design, but the 4-bike version is certainly compatible with travel trailers and 5th wheel trailers. I recommend going with the Swagman XP - 4 Bike Rack for 2" Trailer Hitches # S64940. And since you don't plan on...
    view full answer...
  • 2 Bike Carrier RV Ladder Mounted Bike Rack Security and Popularity
    The Surco 2 Bike Carrier # SP501BR is very secure for transporting your bikes. The # SP501BR bike rack is designed to be easily installed and removed. It is not intended to be left on the ladder of your RV when not hauling bikes. If by secure you mean easily stolen or removed, then the rack could be locked to the RV ladder with a cable lock such as Master Lock 3 Foot Long Tuff Links Chain Lock, # 8291DPS, for security. These racks are a very popular seller and seem to be one of the best...
    view full answer...
  • Ladder Mount Bike Rack Recommendation for a 2009 Sunnybrook Mobile Scout Trailer
    You can use the Surco Ladder Mounted Bike Rack, # SP501BR, to carry your Schwinn bikes as long as the ladder on your 2009 Sunnybrook Mobile Scout has 1 inch diameter tubing. Most trailer or RV mounted ladders use 1 inch tubing.
    view full answer...
    Image 1 for
  • What Ladder Mounted RV Bike Racks are Available
    Of the Ladder mounted RV bike racks my favorite is the Stromberg Carlson 2 Bike Carrier for RVs - Ladder Mount -part # LA-102. I like the bang for the buck this one offers versus the Surco option part # SP501BR. Checkout the video I did on the Stromberg model linked below. I also linked the page that includes the three options we have available if you would like to check them out.
    view full answer...
  • Stabilizing 2 Bikes On the Surco RV Ladder Bike Rack SP501BR
    The best way to help prevent your bikes from scratching each other would be to adjust the cradles so that your bikes would be as far apart as possible and then use the Curt Trailer Hitch Support Strap # 18050 to help keep them from moving. This will not necessarily guarantee that there will be no damage, as there is a lot of play at the rear of any RV, but this will definitely help.
    view full answer...
    Image 1 for
  • Is The RV Ladder Bike Rack Compatible With Slide-In Truck Campers?
    Yes, the Surco 2 Bike Carrier # SP501BR can be used with the ladder on your slide-in truck camper ladder. You will want a Cable Lock # e98891 to secure them to your camper.
    view full answer...
  • Advisability On Using Extensions With a Tow Bar
    Although it would seem like an ideal way to carry the items you wish to carry, I spoke with my contact at Roadmaster and they told me that they strongly advise against adding additional extenders to the hitch. Adding the reducer on your receiver does not reduce the towing capacity, but the double receiver does. Normally, adding extensions to your receiver reduces the towing capacity by 50%. Adding an additional extension would certainly reduce the towing capacity by another 50%. With that...
    view full answer...
  • Ladder Mounted Bike Carrier Compatibility with Ladder That has 10 Degree Bend About 1/2 Way Up
    The Surco 2 Bike Carrier for Vans and RVs # SP501BR will absolutely fit your 2006 Holiday Rambler's ladder. The majority of RV ladders are not perfectly straight, but that does not impact the fit of the bike carrier. The carrier will give you the connection points and the bikes will basically follow the curve of the ladder so you can secure them. I recommend using a cable lock like # e98891 to deter theft.
    view full answer...
    Image 1 for
  • Can Stromberg Carlson 2 Bike Carrier for RV Ladder # LA-102 Be Used With Two Electric Townie Bikes
    The Stromberg Carlson 2 Bike Carrier for RV Ladders # LA-102 has a maximum weight capacity of 25-lbs per bike. I contacted Electra Bicycles to find out the weights of their various Townie models (as this is not provided on their website) and they advised that their lightest models in the Townie series are 35-lbs. This makes the Stromberg Carlson RV rack unsuitable for your particular bikes. We offer a similar ladder-mount RV bike rack from Surco, part # SP501BR, that offers a higher weight...
    view full answer...
  • 2- to 4-Bike Rack Recommendation for 24-foot Class B Recreational Vehicle
    We can offer you lots of options in RV-approved bike racks and we can help you find the best one for your particular vehicle and bikes. A great starting point for you is the linked article. This will show you the various types of racks we offer - bumper-mount, ladder-mount and hitch-mount - and also help you choose the one that best fits with your particular bikes. The linked page will show you all RV-approved bike racks and you can use the filters on the page to select the rack type and...
    view full answer...
  • Will Bikes have to be Removed from Surco RV Ladder Mount Bike Rack to Open Rear Door on Camper
    Most likely, yes, you would have to remove the bikes before opening the rear door on the camper. If the ladder is near the door the bikes are going to be wider than the ladder and could overhang the ladder on either side. If they are wide enough they could block part of the door. The best way to tell if there will be an issue is to measure the total height of the tallest bike, dived by 2, then measure horizontally from the center of the ladder over towards the door, half the height of...
    view full answer...


< Previous
123. . .5



Do you have a question about this RV and Camper Bike Rack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Written by:
Lindsey S
Employee Dustin K
Video by:
Dustin K
Employee Randy B
Installed by:
Randy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924