Master Lock Laminated Steel Padlock - 1-3/4" Wide - 5/16" Diameter Shackle

See what our Experts say about this Master Lock Padlocks

• Offset Gooseneck Coupler Recommendation For A 2019 Chevy 2500HD Crewcab Short Bed.
  The B&W Extend-A-Goose Gooseneck Coupler # BWTEXA4200 provides an additional inch of clearance at 10" vs. the SB1, it is lockable with an # ML1KA padlock for additional security, and has a beveled gooseneck opening with spring-loaded handle that makes hook up easier vs. the SB1 quick release coupler in my opinion. The final reason I like this coupler is because of the quality construction. Made here in the USA with the gray powder coat finish that B & W is known for. For these reasons...
  view full answer...
• Availability of Keyed-Alike 1/2-Inch 5th Wheel Hitch Locks
  We do offer pin-style 5th wheel hitch locks such as the Tow Ready # TR63254 but they cannot be keyed alike. However, we offer Reese Pull Pin Lock Plates for 5th Wheel Trailer Hitches, part # RP58093 sold as a set of four, that can be used along with the Master Lock Shrouded Padlock # ML1KA. This lock can be ordered in keyed-alike multiples by selecting this option from the drop-down menu.
  view full answer...
• A-Frame Toolbox for Aluma Trailer
  We likely have a toolbox which will work with your Aluma 548 trailer although A-Frame toolboxes are not made specifically to fit certain trailers so you will need to know the amount of room you have to fit the box. I do recommend going with a plastic toolbox for your aluminum in order to resist potential corrosion and the DeeZee Specialty Series Trailer Tongue Toolbox # DZ91717P would be a great option. It measures 36" long in the back, 18" long in the front, 19-1/2" wide, 17-3/4" tall...
  view full answer...
  
• Chest Style Storage Box for Ford F-150 with 5th Wheel Hitch
  Since you have limited space in your short bed F-150 the storage box I suggest is the DeeZee Specialty Series Chest Style Storage Box # DZ6535P. This rigid and lightweight USA-made plastic box measures 35 long x 14 wide x 13 tall so it will fit your space and it has over 3-1/2 cubic feet of internal volume. The video that is linked for you will help show you all of its features. I recommend adding Padlock # ML1KA for security and battery-powered motion-activated LED Light Strip # A90392...
  view full answer...
  
• Coupler Lock to Protect a Boat Trailer Both at Home and at the Boat Ramp
  What you could use is the HITCH-LOCK, # DL13980. With the plate angled up, the trailer is protected from someone trying to hitch up to it. When towing a trailer with the plate angled down, it prevents someone from removing the hitch ball already in the coupler. It can be used with the trailer hooked up or not. You will need to use a pad lock like # ML1KA with this HITCH-LOCK. It is also zinc plated for corrosion resistance so it would be good for a boat trailer. For a lock that can be...
  view full answer...
• Recommended Cargo Carrier With Tool Box for Lockable Storage
  The 20x60 etrailer Cargo Carrier for 2" Hitches # e98874 has the capacity to handle many tool box options. The internal dimensions are 59-3/4 by 20 inches, so a chest style utility chest will be best. I recommend the DeeZee Hardware Series Truck Bed Toolbox - Steel # DZ8546SB which is 60 lbs or the Aluminum # DZ8546B which is 52 lbs. If you want to go with a poly plastic option for weight and size preference, you can use the DeeZee Specialty Series Storage Box # DZ6535P. This is much...
  view full answer...
• Lock Actuating Coupler On Trailer To Truck
  For your trailer with adjustable ball # T43397007K to be locked to your truck while boating, I recommend the HITCH-LOCK Trailer Guard Coupler Lock by Dutton-Lainson # DL13980 along with the Master Lock Padlock # ML1KA. This will work as long as you have a hitch lock on your ball mount like # C23519 so they can't just use your ball mount to take the locked trailer.
  view full answer...
• Recommended Trailer Coupler Locks for Wide Coupler Security
  For your Atwood Channel Tongue Trailer Coupler 80060, I recommend the Fastway Universal Trailer Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers # FA86-0015-318 or the Master Lock Coupler Lock for 1-7/8", 2", 2-5/16" Couplers # ML389DAT are both good options. The latter doesn't have any restrictions of the width of the coupler.
  view full answer...
  
• Will the Padlock Bracket Part # CE26002Z-2 Fit the Replacement U-Bolt Part # CE22011Z
  Yes, the CE Smith Padlock Brackets part # CE26002Z-2 will fit the Replacement U-Bolt for CE Smith Spare Trailer Tire Carrier part # CE22011Z. For a lock, I recommend using the Master Lock Laminated Steel Padlock part # ML1KA.
  view full answer...
• Recommended 5th Wheel Trailer Hitch for a 2011 Ford F-150 with a 5-1/2 Foot Bed
  You would be able to install a fifth-wheel hitch on your 2011 Ford F-150, but because the truck has a 5-1/2 foot bed, you would also need to install a Sidewinder king pin box on your trailer. I would recommend the Reese 20k fifth-wheel # RP30928. To use this hitch, you will first need to install Reese custom installation kit # RP50081-58. I am including links to the instructions for both for you to review. The sidewinder pin boxes are matched to the manufacturer and model of the current...
  view full answer...
• Can I Get Multiple Padlocks that are Keyed Alike?
  Yes, you can get multiple Master Lock Laminated Steel Padlock item # ML1KA keyed alike. You will want to select the keyed alike drop down option and then input as many locks as you will need and all of the padlocks they send you will be keyed alike. Make sure you buy as many as you need because you will not be able to come back later and get the same lock and key combination.
  view full answer...
• Recommended 5th Wheel Hitch for Towing with a 2018 Ford F-150 5-1/2 Bed
  Since you have the 5-1/2' bed on your 2018 Ford F-150 what you need to do is use a stationary 5th wheel hitch and replace the pin box on your trailer with a Sidewinder or 5th Airborne Premium with the Sidewinder. The 5th wheel hitch I recommend using is the Reese Select Plus 20K # RP30081 because it features a superior single-jaw for 360 degrees of king pin contact and the higher weight capacity so that you have a safety margin (be sure not to exceed the weight rating of your F-150)....
  view full answer...
  
• Recommended Locks for Securing Trailer to Vehicle and Protecting Bikes
  Locking your trailer to your car can be done in a couple of different ways. You can use the Master Lock Hitch Receiver and Coupler Latch Lock Set - Padlock - 1-1/4" and 2" Hitches # 2848DAT to secure your ball mount and lock your coupler to the hitch ball. Another option is to use the HITCH-LOCK Trailer Guard Coupler Lock by Dutton-Lainson # DL13980 which secures under the coupler and ball mount and utilizes a padlock like the Master Lock Padlock # ML1KA to secure the trailer to the ball...
  view full answer...
• Compatibility of Draw-Tite Hi-Rise Gooseneck-to-5th-Wheel Trailer Hitch Adapter 9480
  The Draw-Tite Hi-Rise Gooseneck-to-5th-Wheel Trailer Hitch Adapter # 9480 will fit in your Draw-Tite gooseneck hitch. It also fits in Reese, B&W and Bulldog goose neck hitches. A compatibility issue does arise in short bed trucks and with trailers having a Sidewinder or Revolution pin box. As long as you do not have a Sidewinder pin box on the trailer you're good to go. If you care to add a lock you can use # ML1KA.
  view full answer...
• Are Set Screw Holes Required to Be Drilled To Hold The B&W Extend-A-Goose Coupler?
  The B&W Extend-A-Goose Gooseneck Coupler # BWTEXA4200 should not be drilled into. The coupler sleeve is required to either have 2 set bolts or 1 set bolt if you have a safety through pin to secure it in place on your tube sleeve. A Master Lock Laminated Steel Padlock # ML1KA can be used to secure the coupler when attached to your tow vehicle. And if you choose to have multiple locks keyed alike you can use them all to secure any locks on trailer as well to have a one key system of locks.
  view full answer...
• CE Smith Padlock Brackets for Spare Tire Carriers Compatibility
  Yes, the CE Smith Padlock Brackets for Spare Tire Carriers item # CE26002Z-2 you were looking at will fit the CE Smith Spare Tire Carrier for Trailers item # CE22007Z-11050-2 and item # CE22011Z-11050-2. So if you purchased one of those two spare tire carriers you will have no compatibility issues. For a lock, I recommend using the Master Lock Laminated Steel Padlock item # ML1KA. We offer both components and a lock as well. It is the CE Smith Spare Tire Carrier - Locking - Steel - 4-Lug...
  view full answer...
  
• Lock for Ram Truck OEM Fifth Wheel Hitch
  The Ram OEM fifth wheel can be locked though there is not a specific lock designed for it. The Reese OEM 5th Wheel Hitch # RP30918 will need to be locked with a padlock such as the Master Lock Padlock # ML1KA in the place where the pin and clip are at the handle.
  view full answer...
• Rear Door/Ramp Latch for Holding Horse Trailer Ramp in Place
  Sounds like you have a rear ramp/door on a horse trailer and need a cam style latch to hold it in place when shut. For that the 36" Lock Side-Door Bar Lock Assembly # 305736 can be used for this. It would be just a matter of mounting the assembly on top of the ramp/door to hold it up there. Or you could use two of these, one on each side and that would work as well. There are holes on the latches that you can run a padlock through like the # ML1KA. If you have something totally different...
  view full answer...
• Can the Thule Van Lock # TH309832 be Locked without the Key?
  Yes, the Thule Van Lock # TH309832 can be locked by pushing down on the lock cylinder without the key. With that mechanism, it is possible for someone to lock you into the bus by sliding the mechanism shut and engaging the cylinder. A great alternative is to use the Cam-Action Lockable Door Latch Kit w/ Wide Hasp # PLR158 along with the Master Lock Laminated Steel Padlock - 1-3/4" Wide # ML1KA. With this system, no one will be able to lock you into the bus without having the padlock.
  view full answer...
• Changing a Trailer Ramp Door To Barn Doors On A 6x14 V-Nose Enclosed Trailer
  To create barn doors out of your ramp door, you will need hinges and a latch. I suggest a latch/lock system like the Universal Cam-Door Lock for Enclosed Trailers - 1" Keeper, # 383200. This will use a 3/4 inch diameter pipe that you'll have to get at a local hardware store, but the bridge-type keeper prevents accidental opening and ensures safe locking action. It will also allow you to use a separate lock like # ML1KA to secure your cargo. We will also need hinges similar to Strap...
  view full answer...
• Recommended Tool Box and Mounting Method for Installation on the Back of an RV
  You can use the linked page to see all tool chests that are generally suited to your application, but there are a few considerations for installing a tool chest on the back of an RV. First, you will have to have a sturdy rear bumper for part of the chest to rest on since the exterior surface of the RV will not be strong enough to handle its weight. You will also have to confirm that you can find and mount the box to structural elements inside the RV's outer skin. This is something to review...
  view full answer...
• Recommended Options To Securely Lock Cargo To 24x60 etrailer Cargo Carrier for 2 Hitches
  For an option to use with your etrailer Cargo Carrier, # e98874, I recommend using an enclosed box like the DeeZee Specialty Series Storage Box - Chest Style - Poly Plastic - 3.6 Cu Ft - Black, # DZ6535P. This box is 35" long x 14" wide x 13" tall, and will require locks like the Master Lock Padlock, # ML1KA, along with a cable lock or permanent mounting solution. Another option is the etrailer Cargo Bag w/ Mounting Straps - Weatherproof - 20 cu ft - 59" x 24" x 24", # 988501, that can...
  view full answer...
• Availability of a Fifth Wheel Hitch Lock for a Reese Fifth Wheel Hitch
  To swcure your fifth-wheel hitch in the bed of your truck you would need the Pull Pin Lock Plates (Qty 4) for Fifth Wheel Trailer Hitches with Rails, item # 58903. These lock plates work with the Reese 1/2 inch Pull Pins for 5th Wheels, item # 6014. You can use a standard padlocks or the commercial Master Lock Padlock, item # ML1KA, which can be keyed alike for convenience when taking the hitch out of the truck.
  view full answer...
• What Size Lock Is Needed for the Fastway ONEstep XL Wheel Chocks
  In order to lock the Fastway ONEstep XL Wheel Chocks part # FA84-00-4150-2 you can use any pad lock with a shackle thickness up to 3/8". For this, the Master Lock Laminated Steel Padlock part # ML1KA will be a good option and it can be keyed alike so you can use one on both sides of the trailer. In order to install the pad lock simply insert the lock into one of the unused holes in the center of the arms, or into the top hole on the wedge.
  view full answer...

Do you have a question about this Padlock?