bing tracking image
  1. E-Track
  2. Erickson
  3. E-Track Rails
  4. Vertical
  5. 4 Feet Long
  6. 3-1/2 Inch Wide
Erickson Vertical E Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1

Erickson Vertical E Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1

Item # E19146
Retail:$30.98
Our Price: $26.34
You Save: 15%
E-Track
Shipping Weight: 5 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
4' E track with vertical slots is perfect for installation in truck or trailer beds or on enclosed trailer walls. Multiple slots for securing E track straps and tie-down anchors. Bolt-on installation (hardware not included). 6,000 lbs Max load. 1-800-940-8924 to order Erickson e-track part number E19146 or order online at etrailer.com. Free expert support on all Erickson products. Great prices and Fastest Shipping for Erickson Vertical E Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1. E-Track reviews from real customers.
  • All Info
  • Reviews (1170)
  • Q & A (0)
  • Photos

Erickson E-Track - E19146

  • E-Track Rails
  • Vertical
  • 4 Feet Long
  • Erickson
  • 3-1/2 Inch Wide

4' E track with vertical slots is perfect for installation in truck or trailer beds or on enclosed trailer walls. Multiple slots for securing E track straps and tie-down anchors. Bolt-on installation (hardware not included). 6,000 lbs Max load.


Features:

  • E track provides tie-down points for securing cargo in your trailer, truck, or van
    • For use with E track straps and anchors (sold separately)
  • 4' Section with multiple anchor slots is ideal for truck or trailer beds and enclosed trailer walls
  • Vertical slots are designed for wall or floor mounting
  • 12-Gauge steel contruction is zinc plated for corrosion resistance
  • Requires screws or rivets (not included) for bolt-on installation


Specs:

  • Dimensions: 4' long x 3-1/2" wide x 1/2" tall
  • Safe working load limit (WLL): 2,000 lbs
  • Maximum load (break strength): 6,000 lbs
  • Diameter of mounting holes: 1/4"
  • Mounting hole spacing: 2"
  • 90-Day limited warranty


Dimensions

Notes:

  • It is recommended that you use a backing plate (sold separately) every 12" for best results.
  • Use all mounting holes on this E Track for optimal installation.


19146 Erickson Manufacturing Veritcal E-Track Trailer Cargo Control - 4-Foot Piece





Customer Satisfaction Score:


Customer Reviews

Erickson Vertical E Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1 - E19146

Average Customer Rating:  4.9 out of 5 stars   (1170 Customer Reviews)

4' E track with vertical slots is perfect for installation in truck or trailer beds or on enclosed trailer walls. Multiple slots for securing E track straps and tie-down anchors. Bolt-on installation (hardware not included). 6,000 lbs Max load.

by:

Great quality, easy installation, made adding shelves to my trailer a breeze. I screwed them into 3/4 inch plywood, instead of the trailer framing, which reduces the weight capacity, however, i'm not storing anything NEAR what these shelves can hold. Everything's screwed together, and the shelves are removable/adjustable. (I have no experience with this type of project.



by:

Great item. Made a bed in my trailer.

Branden

4/17/2015

haha thats awesome I was thinking of doing that exact same thing.. work well and stable??

Darrin A.

5/8/2015

This setup works great and is very stable. Has held me and my wife comfortably. Put a futon mattress on top!



by:

Perfect for adjustable shelving or other items you want to move up and down in your garage or enclosed trailer! I even used them to make a barrier in my tool trailer to keep things in place.



by:

I received the products just as described it too about 4 working days.
I plan on building shelves into my enclosed trailer for camping gear.

Brad B.

11/14/2014

Well I love the tracks you can do so much with if you do not own any your missing the boat here. I have them in the trailer and they work like a dream. You have lots of adjustments with them.



by:

I installed this track in a horizontal fashion on the side wall all the way around the inside of my trailer. This allows me to secure any size and shape load to the the wall of the trailer as opposed to just trying to tie it off over the top, much more secure and adaptable than just using the tie offs on the outside of the trailer. It was easy to install and is a snap to use.



by:

As requested, here are some pics of my e-track installation. I find the raised e-tracks in the floor very problematic and dangerous so I made sure they were recessed. This is now an extremely versatile cargo trailer.



by:

Nice, strong construction of the chocks, but the paint doesn't seem durable. Rachets and track appear to be good quality



by:

Great product, easy to install. I used a 2nd section as a backing plate on our Aluma TK1 trike trailer, with 1/4 inch galvanized bolts, every 3-4 holes. fast shipping, great pricing.



by:

Received my vertical E track along with my spare tire holder and installed it last night in temperatures that dip down to 9 degrees ! to say the least installed it in record time.
Had no issues with either product I gave both products a five star rating.



by:

I have an enclosed trailer and needed some way to secure items to the sides. This product is just the right thing for this. I have used these to secure items and they work great. Highly recommend this product.



by:

Well made vertical support to secure items to the trailer wall.



by:

Works great when vertical strapping is needed and space is tight!



by:

I haul live bait on a galvanized trailer. The e-track system is ideal for my application. The salt water doesn't affect anything and works great. I also use it to secure UTVS. I couldn't be more happy with the products and the service.



by:

I totally love E-Trac !! Where would I be without them ?? Totally flexible and versatile!!



by:

This is an excellent product. It was perfectly suited to what I wanted to do. See attached picture.



by:

Modified this cargo trailer to haul RC airplanes(too big to fit in my pickup) and remove the upper deck to make it useful for hauling other items. This makes a truly utility cargo trailer. Numerous tie downs with Etrack is really great. I have other pics if your interested. I just purchased an enclosed car hauler and I plan on installing Etrack in it. Thanks for making great products !



by:

I mounted this vertical E-Track to the steel stud on the front inside wall of my trailer. It holds my spare tire up and out of the way very nicely. It also provides an additional place to hook my straps. The steel stud isn't very wide, so I was only able to use the mounting holes on one side of the track, and I mounted it on top of the paneling, and it's holding up very well!



by:

It is E-Trac what more can I say than it does what is designed to do.



by:

Installed the vertical e track. Only issue I had was that the track installation holes are spaced further apart than the trailer frame is wide. Fixed the issue by using short screws to install track over frame into the plywood, than drilling holes in order to use longer screws to go thru plywood into metal framework. Loaded the trailer, strapped everything in, and drove 350 miles to the jobsite. Everything was secure upon arrival. Product worked well.



by:

I purchased the vertical tracks to be used with the storage hooks. Installation was very straight forward and I have eliminated various articles previously on the floor and are now carefully organized on the trailer wall by using the above system. Overall I am very satisfied and feel they accomplished their purpose.



by:

Good quality product. Thats why I shop etrailer because they wont sell something they dont believe to be of good quality and function. In house testing of the product before it's on the site save us customers the headache of failed products, returns & replacement. One year follow ups with their customers helps this too. Excellent Service reliable products & instructional videos.



by:

Worked great. Easy to install. Sturdy. Made it so we could make an adjustable height queen mattress bed frame in the trailer and store bigger things under the bed if necessary.



by:

I have six mounted in my trailer, which I used for moving to a new home and to take my wares to fine art shows. I custom made shelving for the nose of the trailer and these allow the flexibility to raise and lower the shelves, depending on what I'm haling.
can't beat the flexibility these offer,
Highly Recommend



by:

Etrailer supplied the equipment I needed at a great price and shipped the the northwest coast with on days from when I placed the order.
All the e-track hardware and equipment was in stock and arrived packaged very well with no shipping damage.
The e-track is heavy duty, much more than I had expected and it was easy to install.
Looking forward to upgrading my trailer even more from etrailer.

Thanks again!



by:

I like this vertical E-track for hanging light stuff on.

James

7/27/2019

These have been a great asset for hanging things, strapping things to the wall, etc.


25
1100
Show More Reviews

See what our Experts say about this Erickson E-Track

  • Can Erickson E-Track Be Used on Exposed Deck of Open Utility Trailer
    Erickson E-Track Cargo Control items like # EM59150, # E19148 and # E19146 are not painted but rather they are given a zinc coating treatment to provide corrosion resistance since they are made of steel. These are perfectly suitable for use on the deck of an open trailer. Be sure to use appropriate non-corrosive galvanized hardware to install the tracks. No fewer than 2 fasteners per linear foot (on each side) are required.
    view full answer...
  • Can the Vertical E-Tracks Be Used Horizontally on a Trailer Side Rail
    Yes, you can use E-Track # E19146 on your trailer side rails. The Horizontal or Vertical indicates which way the slots on the bar run. But ideally you would use the vertical running slots if mounting on a wall or side rail. I included a link to a video review of E-Tracks for you.
    view full answer...
  • Vertical or Horizontal Etrack for Securing Bed to Cargo Trailer Floor
    Since your plan is to put the etrack on the lowest part of the trailer walls as possible I think vertical etrack like part # E19146 would be the best. But if you wanted horizontal it would work well too realistically. For that part # EM19147 would be what you need.
    view full answer...
  • Spare Tire Mount Recommendation for Trailers with Limited Frame Space
    We do have a couple different spare tire mount options for you to check out. You could go with the Spare Tire Carrier for E-Track Systems, # RA-16HST, that you referenced, but you will also need an E-Track rail. For this I recommend the 4 ft Vertical E-Track, # E19146. The E-track system was primarily designed to be installed inside of an enclosed trailer, but you could install it on the outside of the trailer if you would like. I do not recommend installing it on the side of the trailer...
    view full answer...
  • Extra Sockets for the Rackem Shelf Kit Part # RA-13
    I assume you are referring to the sockets that hold the boards? If that is the case then we do not sell them separately for the Shelf Kit part # RA-13. However, a more cost effective solution would be to use the E-Track part # E19146 with the E-Track Wood Beam Socket part # 59149 as you would be able to choose the amount of shelves. The E-Track part # E19146 might also work with the Shelf Kit part # RA-13 but I can't confirm this.
    view full answer...
  • Can E-Track Accessories be Inserted Into the Track from the Side
    Once an accessory is inserted into E-Track you will not be able to pull it out no matter which direction it is being pulled from. This is because of the way it installs in the track. To use an E-track accessory you will need to insert the item in the slot long ways. So you would push in the little button, fit the bottom of the item in the bottom of the slot, push the item back at the top, then let go of the button. You would not be able to angle it in from the side. Take a look at the...
    view full answer...
  • Recommended Vertical E-Track System For Enclosed Trailer Walls
    We offer a Vertical E-Track System that may be just what you are looking for. This is a 4 ft long track designed to install on the walls of your enclosed trailer. This system is made of 12-gauge zinc coated steel and measures 4 ft long x 3-1/2 inches wide. It has a maximum load capacity of 6,000 lbs. To order this system you will need part # E19146. The D-Ring for the system I recommend is part # E59143. This is a 2 inch x 6 inch strap with a D-ring attached. This has a maximum capacity...
    view full answer...
  • Erickson Vertical E-Track E19146
    I have a solution for you, but the Erickson Vertical E-Track # E19146 only comes in sections 4 feet long. There are no vertical E-tracks that are shorter. However, the E-tracks can be cut to fit the length needed for your trailer. The # E19146 with the Rackem Spare Tire Carrier for E-Track # RA-16HST will work well for your trailer. Since the E-track will be a smaller section, you will want to ensure that it is secured to either the trailer frame or with backing plates, like # e96RR,...
    view full answer...
  • Are Snap Loc and Erickson E-Track Components Compatible
    Yes, the Snap-Loc accessories are compatible with the Erickson E-Track Tracks like part # E19146 and # SLLS28CER. I have included a link to all of our E-Track tracks and accessories for you.
    view full answer...
  • Can You Build a Bed With the Erickson Vertical E-Tracks and Move It Up and Down
    It is indeed possible to build a bed using the Erickson Vertical E-Tracks like part # E19146 for example. In order to do so you will need some brackets like the CargoSmart Shelf Brackets part # 3481726 or CargoSmart Board Holder part # 348892 and some lumber. That said, you would not be able to move the bed up and down as a whole. If you did not attach the bed to the bracket then you could so in only a few pieces but since the bed would be pinned between the tracks you couldn't lift it...
    view full answer...
  • Are Snap-Loc Accessories Compatible with Erickson E-Track Tracks
    Yes, the Snap-Loc accessories are compatible with the Erickson E-Track Tracks like part # E19146. I have included a link to all of our E-Track tracks and accessories for you.
    view full answer...
  • Can the Erickson E-Track Trailer Cargo Control # E19146 Be Welded to the Deck of a Trailer
    The Erickson E-Track Trailer Cargo Control, # E19146, can be installed with screws, rivets, or by being welded to the steel deck of your trailer. This track system is very versatile and can be used for a wide variety of applications.
    view full answer...
  • Horizontal or Vertical E-Track for the Floor of an Enclosed Trailer
    For the floor of your enclosed trailer the most popular setup would be the horizontal E-tracks like part # E19148 which is a 5-foot section. Typically the vertical sections like part # E19146 are used on the walls of a trailer and not the floor.
    view full answer...
  • Differences Between Horizontal and Vertical Erickson E-Tracks
    Erickson E-Tracks are offered in various lengths and for either horizontal or vertical installation on your trailer's deck or interior walls. An example of a vertical E-Track is part # E19146 and examples of a horizontal track are part # EM59150 and part # EM19147 that you referenced. You'll notice that the direction of the slots does differ. You will want to use 2 fasteners minimum per linear foot of track. Use fasteners on both sides of the track. So for example, a 2-foot track section...
    view full answer...
  • Does Brophy 5 Gallon Bucket Holder for E-Track # ETBHB Mount In Vertical or Horizontal E-Track
    The Brophy 5 Gallon Bucket Holder for E-Track # ETBHB that you referenced is designed to mount in vertical e-track like the # E19146.
    view full answer...
  • What Solutions are Available to Hang Spare Wheels and Tires for a Quad in an Enclosed Trailer
    The RackEm Spare Tire Rack, part RA-16, would be a great solution, provided the top clip can hang on the top edge of the wall. And provided the spare has a large enough pilot hole to fit over the hangers. If there is not a place to hang the track from, you can use standard E-Track, part # E19146 that does not use a top hook. You will also need extra spare carriers, part # RA-16HST to hang the wheel and tires from.
    view full answer...
  • Can E-Track Install in Trailer Application Where One Side Only Attaches to Metal
    Your setup would be totally fine. Especially considering this is a bed application where the force will be straight down. Every third hole on the metal side and every other on the wood would be more than adequate and would be super solid.
    view full answer...
  • Best Versatile Tie-Down Options for a Cargo Trailer
    I am not sure how many of the Erickson E-Track systems you have seen but it really is your best bet when it comes to versatility and functionality. Not only do they have the Horizontal E-Track, like part # E19148, but they also have Vertical E-Track like part # E19146. You could install both types of track on your cargo trailer (if it is enclosed) and then move the attachment points around by either using the Erickson E-Track Strap # EM59136 or using the Tie-Off w/ D-Ring # E59143 along...
    view full answer...
    Image 1 for Image 2 for
  • Mounting the Erickson Vertical E-Track to the Side Wall of an Enclosed Trailer
    When mounting vertical e-track, like # E19146, the type of hardware used will depend on what the material of the surface is made of that you are mounting the e-track on. If you are mounting tracks on a standard plywood surface then you could you 1/4 inch wood screws. However, if the surface you're working with is sheet metal, then you would need to use a fastener that is rated for use on metal surfaces. The e-tracks do not come with hardware because of the different possibilities of...
    view full answer...
  • What Tie Downs O-Track Or E-Track For Enclosed Trailer Hauling Harley Bagger
    Any of the trailer cargo control systems are only going to be as strong as what surface they are anchored to and how they are attached to that surface. The Erickson O-Track Cargo Control, # EM59133 mounts by drilling holes through the trailer floor or walls and attaching to the backing plate on the other side of the floor or wall to give it the strength. The capacity per track is 733 lbs straight pull or 583 lbs side pull. Two tracks with 4 anchors would give you almost 1500 lbs of capacity...
    view full answer...
  • Can Hooks Be Used in Horizontal and Vertical E-Track
    The storage hooks like parts # ETJR, # ETJS, # EM59142 or # EM59141 all mount in a vertical E-track slot. If you wanted to run the E-track horizontally, you'd use the standard E-track like # E19148. If you wanted to run the E-track vertically, you'd use # E19146. Either way, the hooks will clip into a vertical slot.
    view full answer...
  • Parts Needed To Build Fold Down Single Bed On Horse trailer
    To make a bed inside your aluminum 2 horse trailer I recommend going with E-Track # E19146. This single 4 foot long section is rated for 6,000 pounds of course this is the mounted weight, we just want to ensure that the trailer is rated above 2,000 pounds if in future use that capacity for other purposes. But if you used 2 extra for added support then you and your hunting buddy or grand kid, you would be good to go. You could then use 6 or 8 of bracket # 59149 to start creating the bunk...
    view full answer...
    Image 1 for
  • Availability of Vertical E-Track Where the Slots are Stacked On Top of Each Other
    Sounds like you are looking for vertical E-track like the part # E19146. This is e track that is similar to the # SLSZ you referenced but with the tracks stacked on top of each other instead. The mounting holes are 2-3/4 inches apart from side to side and 2 inches apart vertically.
    view full answer...
  • E-Track Recommendation for 5 x 8 Haulmark Transport Deluxe Cargo Trailer
    The Erickson E-Track is very versatile so they isn't a specific size or model for your 5 x 8 Haulmark Transport Deluxe Cargo Trailer, just install as much or as little as you want, on the deck or on the wall. I have included a link to all of the E-Track tracks, as well as the accessories, for you. If this were my trailer, in order to accommodate a variety of different loads, I would install 2 of the 5 ft Long Horizontal E-Track, # E19148, on the deck of the trailer and 4 of the 4 ft Vertical...
    view full answer...
    Image 1 for


< Previous



Do you have a question about this E-Track?


Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Chelsea B
Updated by:
Chelsea B
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.