Erickson E Track Strap with Ratchet - 2" Wide x 12' Long - 1,165 lbs

See what our Experts say about this Erickson E-Track

• Can the Erickson ATV E-Track Tie-Down Kit EM09160 Wheel Chocks Be Split Across Axles
  Instead of splitting the wheel chocks and straps of one Erickson ATV E-Track Tie-Down Kit # EM09160 across the ATV's two axles I suggest using two kits. The modest price of this Erickson tie-down kit means using two will not cost too much, but doing so will not only provide a much bigger safety margin relative to the weight of your ATV, but also allow that at other times when you're using the trailer for standard cargo items you will have multiple attachment points you can use along with...
  view full answer...
• Mounting Suggestion For E-track To Aluminum Utility Trailer
  For your Aluma 6810 HBT trailer, I recommend the Erickson Horizontal E-Track - Zinc Coated Steel - 2,000 lbs - 5' Long - Qty 1 # E19148 along with the E-Track Backing Plate - Zinc Plated Steel - 6" Long x 6" Wide # e96RR. This will save you the expense of the dual track and will allow you the flexibility of plates between the braces or around them. This track also comes in 4 foot # EM19147, and 2 foot # EM59150. I recommend using the E-Track Plastic End Cap # ET8730 to finish your tracks. For...
  view full answer...
  
• Best Versatile Tie-Down Options for a Cargo Trailer
  I am not sure how many of the Erickson E-Track systems you have seen but it really is your best bet when it comes to versatility and functionality. Not only do they have the Horizontal E-Track, like part # E19148, but they also have Vertical E-Track like part # E19146. You could install both types of track on your cargo trailer (if it is enclosed) and then move the attachment points around by either using the Erickson E-Track Strap # EM59136 or using the Tie-Off w/ D-Ring # E59143 along...
  view full answer...
  
• Availability of Replacement Straps for Erickson ATV E-Track Tie-Down Kit
  The closest thing to a replacement for the straps that come with the # EM09160 are the Erickson E-Track Strap with Ratchet # EM59136. These are a bit longer at 12' and have a max load of 3,500 lbs with a safe working load limit of 1,165 lbs. The only way to get the 7-1/2' straps is with the full kit.
  view full answer...
• Recommended Tie Down Anchor for Aluminum Trailer
  The Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware - Bolt-On - 2,000 lbs - Qty 4 # RR6K-4 are a great choice if you're in need of fixed points on the floor of the trailer and don't care much about flexibility of spacing for different sized cars. If you're looking for a bit more overall flexibility then I recommend using Erickson E-tracks like the # E19148. These tracks will allow you a wider variety of tie down spots along the trailer floor, so it will just make the overall...
  view full answer...
• Cargo Solutions for a 7 x 16-Foot Enclosed Trailer
  Erickson's E-Track Cargo Control systems offer excellent flexibility at a moderate cost. Their E-Tracks are offered in several lengths, such as a 5-foot # E19148 for horizontal applications. Many types of accessories are offered as well, including tie-off rings like # 59131, D-rings like # E59143 and ratchet straps like # EM59136. I have included links for both E-Track items as well as some interior trailer cargo control items.
  view full answer...
• Recommendations for Securing Marching Band Equipment in Enclosed Trailer
  Instead of securing your marching band equipment from the floor you could secure it from the wall using the Erickson Vertical E-Track # E19146. You can then use the Erickson E-Track Tie-Off w/ D-Ring # E59143 to provide tie-down attachment points or use a tie-down like the Erickson E-Track Strap with Ratchet # EM59136 that installs directly into the E-Track .I have also attached a link to our selection of accessories that are compatible with the E-Tracks that you can filter through. An...
  view full answer...
• Availability of Blue Ratchet Strap to Fit E-Tracks
  We have a similar blue E-track ratchet to the part # SLLS28RER but it's instead 12 feet long. For that you'd want the part # EM59136.
  view full answer...
• Mounting E-Track for Hauling Motorcycle on 8 x 5 Trailer
  That's a great question. I believe your installation method for the Erickson Horizontal E-Track # EM59150 sounds like a great plan as long as you have the tracks facing the direction of travel. Basically the E-Track was designed around this and that is the most safe way to secure cargo. To secure your 900 lb bike you can either use the Erickson E-Track Tie-Off w/ D-Ring # E59143 with your current ratchet straps or you can update to the Erickson E-Track Strap with Ratchet # EM59136 which...
  view full answer...
  
• E-Track and D-Ring Recommendation for Securing Cargo in Enclosed Trailer
  I'd install e-track on the walls of the trailer so that you could use e-track tie down anchors like part # 59131 and/or e-track ratchet straps like part # EM59136. The e-tracks give you tons of flexibility in how to strap everything down since the anchors can easily be moved as needed. For e-track then you can use the Vertical E-Track # E19146 mounted throughout your trailer using self-tapping screws. I attached an install video on how to install the tracks as well.
  view full answer...
• Enclosed Trailer Wall Reinforcement for Installing Erickson E-Track
  To install an 8-foot length of Erickson E-Track # E19135 inside your enclosed trailer I do recommend first mounting some plywood to your interior wall studs. A piece of plywood that is larger than the E-Track's 5-1/8-inch width will spread the load across more of the trailer structure. For instance if you first installed a 1 x 8-foot piece of plywood across the studs that would allow more fasteners to be used than with the E-Track rail alone. Then you could mount the E-Track to the plywood...
  view full answer...
• Is Erickson E-Track Trailer Cargo Control Available With Galvanized Mounting Base
  It is possible that the galvanized plate is a custom job, it could be part of the cargo truck, or the track was already installed in the truck from the manufacturer. The item you selected, Erickson E-Track Trailer Cargo Control, part # EM59150 is zinc plated. The E-Track can be mounted using screws, or rivets. If using screws, I would use a stronger grade screw like sheet metal screws. For tie downs and straps I would recommend either the E-Track Tie-Off Ring # 59131, or E-Track 2 inch...
  view full answer...
• Can the Ratchet Straps Which Come With the Erickson ATV E-Track Tie-Down Kit Be Ordered Separate
  If you are looking for just the e-track mount ratchet straps which comes with the Erickson ATV E-Track Tie-Down Kit part # EM09160 the closest thing we have is the Erickson E-Track Strap with Ratchet part # EM59136 which is just a slightly longer version.
  view full answer...
• Option to Carry Kayaks with E-Tracks Inside Cargo Trailer
  I am not aware of an e or x-track accessory that is designed specifically for carrying kayaks but we do have options for this assuming the tracks are on the walls. I recommend using a few CargoSmart Large Rotating Flat Hooks part # 3481701 to suspend the kayaks and then a few Erickson E-Track Straps with Ratchet part # EM59136 to hold them in place. The Erickson E-Track Tie Down Ring part # 59131 along with some standard ratchet straps can be used as well.
  view full answer...
• Can the E-Track be Used to Secure an Outboard Tiller Motor in an Enclosed Trailer
  You can mount E-Track both horizontally, with part # E19148, and vertically, with part # E19146, but you would almost need a stand if you are wanting to keep your tiller motor upright. If you were to solely use the E-Track equipment your motor would just be suspended in the air and would swing back and forth with the tie-downs. I recommend finding a way to mount your motor on a type of stand and then using straps like part # EM59136 to secure the motor to the side of your trailer.
  view full answer...
• Pack Em or Erickson Wheel Strap Recommendation for Securing 2014 Honda Pioneer 700
  Actually both the Pack'em Wheel Ratchet Strap Kit part # PK-WTD and the Erickson Ratchet Strap kit part # EM09160 both use ratchet straps to secure the wheel. Since the Pack'em set is rated higher at 2,000 lbs that would be what I would recommend for you. For just the strap # EM59136 is for the Erickson setup.
  view full answer...
• Availability of 2-Slot E Track Horizontal Track with Black Powder Coat Finish
  I have a few of options for you, but this exact Erickson 2-Slot Horizontal E-Track # EM19145 isn't offered with a black powder coat finish. The Erickson Mini E-Track Plate # EM09134 is the closest option I have. It also has 2 horizontal slots and a nice matte black powder coat finish for superior corrosion resistance and adds a nice rugged look to it as well. This plate has a safe working load limit (WLL) of 800 lbs and a maximum load (break strength) of 2,400 lbs, which is much lower...
  view full answer...
• E-Track Ratchet Straps to Secure Various Diameter Pipes in an Enclosed Cargo Trailer
  The Erickson ratchet strap # EM59136 would be a good option. This strap is 12 feet long and 2 inches wide. I have linked a video review for you to check out to the right. There is also an 8 foot version, # SLLS28RER, 16 foot version, # EM59139, and 20 foot version, # EM59140. What I would do is ratchet strap each bundle with a regular ratchet strap such as # EM34420. Then I would secure them against the trailer using the E-track and E-Track ratchet straps.
  view full answer...
• E-Track Cargo Control Options for Installing Shelving in 18-Foot Enclosed Trailer
  We can help you with an E-Track cargo solution to allow installation of shelving on one side of your 18-foot enclosed trailer. Rather than use ceiling- and floor-mounted tracks I suggest you consider using Erickson's Vertical E-Track # E19146 along with their E-Track Wood Beam Socket # 59149 on one interior wall. You will supply and install standard 2 x 4 lumber and hardware to create the horizontal portions of the shelving using the 2 x 4s.. The advantages of this method are reduced cost...
  view full answer...
• Using Erickson Horizontal E-Track for Securing 2 Sport Quads on 12 Foot Trailer
  E-track is very versatile and comes in different lengths so you can choose what best fits your needs. If you plan on using the e-track to only tie-down your sport quads, it can work well to have the e-track in the middle of the trailer for a tie-down point. However, it you think you will use the e-track to transport other cargo and will need more tie-down options, using 2 rows of e-track will work better. I spoke with one of my co-workers and he says he uses a single row of e-track to...
  view full answer...
• Which Way Should E-Tracks be Mounted to Secure Dirt Bikes in a 5' x 10' Trailer?
  The Erickson Horizontal E-Track # E19148 can actually be mounted either way. For your setup, however, I suggest going widthwise. This way you can mount the dirt bikes side by side while strapping all the fronts along the same track as well as all the rears along another track. This will be the most stabile way to load all the bikes. If you do not already have some tie down straps, the Erickson E-Track Strap with Ratchet # EM59136 will secure everything very nicely. These are 12 feet long...
  view full answer...
• Will Biker Bar Fit Indian Pursuit 23
  None of the Biker Bars will fit your Indian Pursuit since it lacks the two piece tube frame to clamp onto. I recommend adding some E-track like # E19148 and then using some tie down rings # 59131, straps # EM59136, and a wheel chock # 3481731 to secure your motorcycle.
  view full answer...
• Replacement Strap For Erickson ATV E-Track Tie-Down Kit # EM09160
  The 12' Ratchet Strap # EM59136 you found is the closest we have to the 7-1/2' straps which come with the Erickson ATV E-Track Tie-Down Kit # EM09160. You could cut the strap down to the length you are wanting if it is a problem having the extra length.
  view full answer...
• Hardware Recommendation for Securing E Tracks to Plywood Trailer Floor
  Securing the Erickson E-Track # E19148 to 3/4 inch plywood should be sufficient. To secure the track to the plywood, you can use screws, or rivets. Using 1/2 inch screws would be a good length with 3/4 inch plywood. You will want to attach screws at least every other mounting hole. For tie downs and straps I would recommend either the E-Track Tie-Off Ring # 59131, or E-Track 2 inch D-Ring, part # E59143. Also available is the Erickson E-Track Strap with Ratchet, part # EM59136.
  view full answer...

Do you have a question about this E-Track?