bing tracking image
  1. Camper Jacks
  2. Stromberg Carlson
  3. Leveling Jacks
  4. Stabilizer Jacks
  5. Fifth Wheel Camper
  6. Electric Jack
  7. Landing Gear
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs

Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs

Item # LG-4
Retail:$999.69
Our Price: $763.38
You Save: $236.31
Camper Jacks
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K. 1-800-940-8924 to order Stromberg Carlson camper jacks part number LG-4 or order online at etrailer.com. Free expert support on all Stromberg Carlson products. Great prices and Fastest Shipping for Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (170)
  • Q & A (0)
  • Photos

Stromberg Carlson Camper Jacks - LG-4

  • Leveling Jacks
  • Stabilizer Jacks
  • Fifth Wheel Camper
  • Electric Jack
  • Landing Gear
  • 6001 - 7000 lbs
  • Stromberg Carlson
  • 2 Jacks
  • 35 Inch Lift
  • Weld-On
  • Steel

Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K.


Features:

  • Perfect for raising, leveling, and supporting your 5th-wheel trailer or RV
  • Direct-drive motor reduces strain on your jack and allows landing gear to lift with ease
    • No clutch that could slip
  • Single-speed motor won't trip circuits or cause problems with coach's electrical systems
    • IP-rated switch will not spark, so it can be mounted safely in bottle-gas area
  • Drop legs minimize jacking time and help to level the trailer on uneven ground
    • Legs adjust in 1" increments
  • Cage pins included to release drop legs
    • Upgrade to spring-loaded pull pins (LG-119113 - sold separately) for simpler drop leg release
  • Hand crank included for manual operation
  • Heavy-duty steel construction
  • Gearbox is housed in a corrosion-resistant aluminum body
  • Landing gear welds onto trailer frame
  • Set includes 2 jacks, gearbox, motor, switch, footplates, cross shaft, hand crank, and hardware
  • Made in the USA


Specs:

  • Leg length: 33-1/2"
  • Total lift: 34-7/8"
    • Travel: 19-7/8"
    • Drop leg: 15"
  • Combined weight capacity: 6,500 lbs
  • 1-Year warranty


Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.


Stromberg Carlson's landing gear was designed with safety in mind. The motor, manufactured by Lippert, won't trip circuits or cause problems with the coach's electrical systems. In addition, the IP-rated switch will not spark, so it can be mounted safely in the bottle-gas area.


Convenience is also a hallmark of this product. An inner drop leg on each jack makes leveling easy by allowing the jack feet to reach the ground quickly and at varying heights, saving time and thus reducing the draw on the trailer's battery. The cage pins that secure the drop legs can be replaced with spring-loaded pull pins (LG-119113 - sold separately) that allow for single-handed operation. Large, rectangular, pivoting footpads are included, but you can use larger, 9-inch-diameter pads (LG-210475 - sold separately) instead if you often camp on soft ground.


This system and its parts were designed to be compatible with most of the other fifth-wheel landing gear on the market, including Atwood and Lippert. If you're replacing your old landing gear, you can install this set from Stromberg Carlson using your existing mounting hardware.



LG-4 Stromberg Carlson Deluxe Electric Landing Gear for Fifth Wheel

Installation Details LG-4 Installation instructions


California residents: click here


Customer Satisfaction Score:


Customer Reviews

Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs - LG-4

Average Customer Rating:  4.6 out of 5 stars   (170 Customer Reviews)

Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K.

by:

Jacks has functioned very good over the last year. No problems or issues encountered .



by:

Landing gear was exactly what I ordered. Prompt delivery. Package was perfect. Landing gear just not as heavy duty as I hoped. I'm sure I will be replacing it again in a few years.



by:

I'm typically not one to complain or write a poor review however, E-Trailer has produced very poor customer service and product handling. I called and ordered this landing gear over the phone to ensure with a representative that I was getting the correct part. My concern was the weld stops mounting up to my current brackets. The representative ensured they would fit after reviewing specs. When the legs arrived I was surprised by how poor the packaging was upon opening the makeshift packaging the legs looked like they were used and they were missing several parts. I contacted customer service they offered a $[XX] discount and part replacement. When I went to install the legs, I discovered that they would not fit my brackets and the measurements the representative gave we not accurate. I called customer service again. The end result was I had to purchase another set of legs and wait up to 14 days to get reimbursed for the legs which were the wrong fit. I requested a discount of some sort due to the inconvenience this caused. The supervisor offered expedited shipping and that is all. If I wasn't in a situation in which I needed new legs to repair my 5th wheel, I would have definitely gave my business to another company.



by:

Just what I needed, fast shipping, great product.



by:

Nice direct fit easy install and work w ell

Chris

8/10/2023

Still love them and work well



by:

I have a 2010 Bighorn 3055rl and these jacks were an exact match to the failed jacks so installation was simply a reverse of the removal. All of the necessary parts were included for a full replacement. The quality seems similar to the originals. I hope they last longer and they should as I have changed how I operate them. In my opinion, they did not come with enough grease on them and that may also be part of the reason the original jacks failed. I put plenty of grease on these.

Joey

11/22/2019

Still working as expected.



by:

I purchased this landing gear to replace the RBW landing gear on a 1998 Mallard made by Fleetwood. Only one side of the RBW was bad, but I was unable to find parts to repair it. I had to weld new brackets to the legs to match the existing U brackets that were already welded to the frame of the 5th wheel. Everything went smoothly with the installation until I went to hook up the square tubing for the cross bar that ties the legs together. The tubing was about 8" too short to reach from one leg to the other. Luckily I was able to use the cross bars from the original RBW gear. I am not sure why the Stromberg Carlson cross bar was so short because my 5th Wheel is a standard width. Other than that it looks like a good product.



by:

We have used the camper jacks at least 11 times and they have worked perfectly & also operates very quietly. We are very pleased with them & give it a 5 star rating.



by:

I put them on they will lift the trailer by hand but motor can’t lift is there a strong motor for this you Customerservice said it would lift this trailer it is a Fleetwood terry 5th wheeler



by:

I could not find exactly the right size that I need it for the front of my 40 foot Jayco fifth wheel however this unit work just fine and has given me a year’s good service no problems no complaints



by:

Box was torn apart all parts were still in it plus some stuff that didn’t belong



by:

Product was exactly what I needed. We only had to make one modification to the legs so that we did not have to weld in the new straps. Works perfect.
I would love that it instructions would have shown the picture as if you were facing the equipment.



by:

Best way to go even if your just fixing your ecisting jacks. They have made many improvements to the motor and gear box.



by:

Product arrived in excellent shape (UPS shipper), had all parts, instructions, and installed as specified. I shop etrailer because of price, quality and delivery. Great bunch of folks if you have questions.



by:

Landing gear package was everything i needed and fit perfectly. Installed and working great.



by:

The service was great and when I received the item and noticed a part was missing I made one phone call and got the issue resolved

Thank you for great service



by:

I wasn't sure about this product when I ordered it. I measured my old unit several times and everything seemed to match. I was very pleased to find everything I found on the website was correct and the install went much smoother than I anticipated. Very happy with the end result.

Murray



by:

was pleased with the service and shipping time. Have it half installed as it is raining now with a lake under the front.



by:

VERY satisfied



by:



by:



by:



by:



by:



by:


25
170
Show More Reviews

See what our Experts say about this Stromberg Carlson Camper Jacks

  • Stromberg Carlson Landing Gear Replacement for 2001 Fleetwood Prowler LSI 30 5G
    The Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs # LG-4 will work well with your trailer. I've attached a photo that shows where the weld stops are for the brackets mounted on your trailer. You shouldn't need to change out the brackets so these should bolt right up and work well for you.
    view full answer...
    Image 1 for
  • Replacement Landing Gear for 2011 Heartland Big Country 5th Wheel Trailer
    If your landing gear is electric then it could just be a switch or the battery could be bad. Having the battery tested will determine if it is the problem. You can determine if the switch is the problem by applying power directly to the motor; if it works fine then it is likely a problem with the switch. A battery or switch replacement is a lot easier and less expensive than a whole new landing gear system! But if it turns out that it is neither a switch nor the battery then I agree that...
    view full answer...
  • Can the Stromberg Carlson Electric Landing Gear Set LG-4 Be Bought Without the Motor
    In order to piece together a kit similar to the Stromberg Carlson Electric Landing Gear Set part # LG-4 but without the motor you will need to obtain the following: Replacement Lead Leg for Stromberg Carlson Landing Gear - part # LG-177202 Replacement Follow Leg for Stromberg Carlson Landing Gear - part # LG-177201 Replacement Footpad and Pin for Stromberg Carlson Landing Gear - part # LG-119225 (2) Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear - part # LG-179015 Replacement...
    view full answer...
  • Replacement Landing Gear Leg Set for a 1998 Fleetwood Terry 5th Wheel Trailer
    In order to make sure we get the best set of landing gear legs for your 1998 Fleetwood Terry 5th Wheel Trailer, I would need to know how long the outer tubes are on your existing landing gear legs. If they are 29-1/2" long then I recommend using the Stromberg Carlson Electric Landing Gear Set part # LG-3 but if they are 33-1/2" then I recommend using the Stromberg Carlson Electric Landing Gear Set part # LG-4. The location of the mounting bracket on your trailer now should line up with...
    view full answer...
  • Solution for Needing Replacement Motor for Fulton Trailer Landing Gear
    I did some checking and the Fulton line of landing gear was discontinued in 2000 and there are no longer any replacement parts listed for it. I wish there was just a motor kit I could recommend for you but you'll have to look into a new set of powered landing gear. For a replacement we have the Stromberg Carlson part # LG-4 which will match the bracket dimensions you have now and has a 6,500 lb capacity which means it will raise and lower your trailer quickly and last a long time due...
    view full answer...
  • Landing Gear On A 2018 Jayco CKTS 5th Wheel Will Not Raise Or Lower Trailer
    There could be a number of reasons why your Stromberg Carlson Electric Landing Gear Set # LG-4 isn't working properly. Since you have recently replaced the battery, an old battery won't be an issue, however I would still verify that the battery you're using is rated for the appropriate amperage that the jack requires. If you have a battery that isn't able to supply the amount of amperage to operate the jacks, then that very well may be your issue. I also recommend verifying that all of...
    view full answer...
  • What Would Cause Hydraulic Landing Gear to Slowly Lower On its Own
    If you have a hyraulic landing gear set that lower on it's own you have a leak or a bad seal in your hydraulic lines. You'll need to have the system checked out and serviced most likely.
    view full answer...
  • Troubleshooting Landing Gear Not Lifting 5th Wheel
    Any powered landing gear or powered tongue jack will draw less power as it legs descend down toward the ground and much more as soon as they make contact and encounter resistance. This is a normal occurrence. In the same way, any jack - even a manual hand-crank type - requires less power (or force) when lowering the trailer than when lifting it. The cause for your powered landing gear losing steam could be any of several possibilities. These include the trailer's battery not being rated...
    view full answer...
  • Determining The Correct Replacement Landing Gear For A 2010 Keystone Montana
    Absolutely, and thank you for your measurements. For your 2010 Keystone Outback 285FL, the closest we have is the Stromberg Carlson Electric Landing Gear Set # LG-4. The distance between the weld stops on # LG-4 is 19-1/2" which is 1/8" shorter than what you measured, I would double check that the measurement you measured is accurate to ensure these will work. Also, you will need to verify that the outside to outside measurement is 21-1/2". This landing gear has a total lift of 34-7/8",...
    view full answer...
    Image 1 for
  • Replacement Gearbox for an LG-4 Landing Gear That is Having Trouble Lifting and Retracting
    From what you are describing, it sounds a lot more like your gearbox is the problem. Especially if replacing the motor didn't get you back up and working properly. I will say that is a little odd that the manual cranking works without issue, but I am still going to steer you towards a new gearbox. If it was something internal in the actual leg, you would hear the noise and have issues regardless of how you lift or retract. So with all that being said, the gearbox I suggest is the Stromberg...
    view full answer...
  • Landing Gear on 2010 Fuzion FZ322 Toy Hauler Travels a Few Inches But then Stops
    It is possible that you have a bad switch. It is also possible that the battery needs to be charged or replaced. The motor is going to pull what it is going to pull but will have to keep working harder to pull the current required to operate. If there is a problem with the battery then it can't function. You could have the battery tested at an auto parts store to see if it is in good working order. I would do that first so that you aren't buying switches or wiring you won't need. If the...
    view full answer...
  • Solution for Needing Replacement Motor for Atwood MPD 7119 Landing Gear
    I wish we had a motor that would work for you, but we recently found out that none of our motors fit the now discontinued Atwood landing gear sets. Best option is a new powered landing gear set like the # LG-4 which uses a higher speed motor and has a higher capacity at 6,500 lbs. I attached a review video for this landing gear set for you to check out as well.
    view full answer...
  • Determining Which Landing Gear Fits A 2011 Forest River Sandstrom 5th Wheel Toy Hauler
    I would be happy to help you find the correct replacement landing gear for your 2011 Forest River Sandstorm 5th Wheel Toy Hauler, but based on the measurements you provided there is not an exact replacement option available. The closest options is going to be the Lippert Electric Landing Gear Set - Weld On - 37" Lift - 6,000 lbs # LC333964 which measures 15-1/2" inside to inside of the weld stops, and 17-1/2" outside to outside of the weld stops. This option along with all of the available...
    view full answer...
    Image 1 for
  • Replacement Landing Gear Option for 1996 Nash 5th Wheel Trailer
    I was able to find that the landing gear brand used on your 1996 Nash 5th wheel trailer was RBW, but this was the only information Northwood Manufacturing (maker of Nash trailers) could find. Unfortunately the RBW trailer product lines were dissolved several years ago, so finding replacement parts or repair kits will be virtually impossible. You may get lucky at a junk yard with old trailers somewhere, but it will be a long shot. If you are having issues with your landing gear legs, I...
    view full answer...
  • Replacement Landing Gear for 2010 Open Range 5th-Wheel Trailer
    For your 2010 Open Range 5th-Wheel Trailer, I recommend looking at the Stromberg Carlson Electric Landing Gear Set # LG-4. Each leg on this set is 33-1/2 inches tall and provides up to 19-7/8 inches of travel. It has a combined weight capacity of 6,500 pounds and the direct-drive motor will reduce strain on the jack for easy stabilization. To determine if this will fit with the brackets you already have welded to your trailer, you will want to take a measurement between them. The distance...
    view full answer...
    Image 1 for
  • Replacement Landing Gear for 2007 Cougar
    From what you have described it sounds as if the landing gear needs to be replaced. For your 2007 Keystone Cougar, I recommend the Stromberg Carlson kit, # LG-1 which matches exactly what you have and includes the motor too. Or, for a non-powered kit that will cost a bit less, # LG-183708 but this requires you to hand crank it.
    view full answer...
  • Troubleshooting Landing Gear on Fuzion Toy Hauler That Will No Longer Lift Trailer
    It sounds like the landing gear on your Fuzion Toy Hauler may have been overextended, which likely caused damage to the internal gears and screw. This "flopping" that you mentioned is essentially the unit trying to extend but since the internal components have been compromised, it is unable to operate properly, which is producing that extensive vibration and shaking on the leg and motor. Your best option at this point is likely to replace the entire system. I recommend taking a look at...
    view full answer...
    Image 1 for
  • Is There a Higher Rated Landing Gear Set with Electric Motor than 6,000 lbs
    The only single motor landing gear set we offer with a higher rating than the Lippert Electric Landing Gear Set part # LC333964 which is rated at 6,000 lbs is the Stromberg Carlson Electric Landing Gear Set part # LG-4 which is rated at 6,500 lbs. The higher rating should help the jacks lift the trailer slightly faster but the issue with the old jacks was likely just the motor going bad rather than it being underrated. I'd also make sure the battery is topped off as that can affect the...
    view full answer...
  • Landing Gear to Replace Ultra Fab Set that is Failing
    If you're having bad luck with the Ultra Fab landing gear jacks then I would recommend going with a new landing gear set like the Stromberg Carlson part # LG-4. This will require moving the mounting brackets on your trailer but it will work great and be more reliable than your Ultra Fab setup.
    view full answer...
  • How Do You Determine What Landing Gear Is On Your Trailer?
    If there isn't a brand name printed on a tag somewhere on the actual landing gear it is not easy to determine because they all look and function the same way. The nice part about that is that if you need to replace parts or complete systems they are fairly universal and just require the proper weight rating or style. I've attached a link to our page to assist. One help is to measure brackets welded to your frame. The distance between them will help in determining a correct replacement. If...
    view full answer...
    Image 1 for
  • Troubleshooting Powered Landing Gear That Won't Operate Under Load
    Thank you for clearly describing the issue with the motor on one of your landing gear legs. When a jack motor operates when there is no load on it but fails to operate when there is a load this usually relates to a loose power connection. Check both of your power leads to that motor to ensure that both ground and hot connections are absolutely tight. A weak ground will deliver some power but often not enough to lift. When a jack operates in the retract direction but not in the extend...
    view full answer...
  • How to Select the Correct Replacement Follow Leg for Fifth Wheel Landing Gear
    In order to choose the correct replacement follow leg, you will need to know the manufacturer or model number, which should be visible via a sticker or stamp somewhere on the landing gear. The reason for this is there may be slight differences that cause imbalance if the landing gear legs do not match. So if you have Stromberg Carlson models # LG-2 or # LG-4 then the correct replacement follow leg would be # LG-177201. I have added a link to our page with each of our follow legs for you...
    view full answer...
  • Which Replacement Venture Lead and Follow Landing Gear Legs
    You could re-use your existing # LG-4 if you have that bottom attachment bracket relocated to the appropriate position. It would involve removing the existing bracket and having the bracket provided with the # LG-4 welded into place. If you'd prefer simply replacing the lead and follow legs you can use Lippert's # LC119102 which is the replacement Venture lead leg and # LC119101 for the follow leg. The legs would be compatible with your existing motor. Each leg has the 17-1/2 inch stop...
    view full answer...
  • 2006 NuWa Discover America Landing Gear Replacement Motor
    If it has recently slowed down there may be a weak battery or wiring issue that you need to look at. After confirming your battery has a good charge. Check the connections either the connectors are corroded and not making good contact or the wiring has been compromised. If the wiring is in good shape and the connections look good then the motor may very well be going bad. The gear box will slip and clang and even produce a ratcheting sound but really doesn't effect speed. It just goes or...
    view full answer...


< Previous



Do you have a question about this Camper Jack?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jacob T
Video Edited:
Jacob T
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Shelly K
Updated by:
Shelly K
Employee Mike S
Updated by:
Mike S
Employee Wilson B
Written by:
Wilson B
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.