Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor
(38 reviews)
Price: $391.62
In Stock
Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor
Item # LC141893
Retail:$496.95
Our Price: $391.62
You Save: $105.33
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (38)
- Q & A (0)
- Videos (1)
- Photos
Lippert Accessories and Parts - LC141893
- Camper Jacks
- Trailer Jack
- Motor and Gear Parts
- Motor
- Lippert
- Lippert Components Power Landing Gear is standard on most fifth-wheel RVs produced today. This high-speed Tuson Landing Gear Motor will allow you to quickly extend and retract your fifth-wheel RVs landing gear, leaving you more time for the fun stuff while camping. This motor is easy to install and requires no assembly.
- High-speed Tuson Landing Gear Motor for fifth-wheel RVs
- Motor only; no other parts included
- 7,140 RPM rating
- 5,000 lb Capacity
- For use on LCI Power Landing Gear assemblies
- Easy to install
- No assembly required
- 1-Year limited warranty
141893
Video of Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Lippert Components - Trailer Jack,Camper Jack - LC141893
Today, we're going to take a quick look at the Lippert components Tucson high speed, fifth wheel RV landing gear motor. Now, this is going to upgrade your existing system with the electric motor, so that you can get your landing gear deployed quickly and easily and get on to enjoying your camping trip.Now, Lippert components power landing gear is going to be pretty much standard on most fifth wheels, that are produced today. So, this is going to allow you to extend that landing gear and retract it as well. It comes pre-assembled, so it's really not too hard to install, you'll just have your bolts that go on top of your landing gear. Now, this is just the motor by itself. It doesn't come with any other equipment or hardware for it.
So, if you need any other components, you will have to pick those up separately. We'll have our two leads there, for power and ground, so you will also have to connect those into your wiring on your RV.The motor does have a 7140 rpm rating and a 5000 pound capacity. This is for use on the LCI power landing gear assemblies and this product is also made in the USA. As far as the dimensions with this, overall going from the top of that cylinder down to the end of the motor there, it's going to be about 8 and 1/2 inches. Going to the end of our bolts, it's going to be more like 9 and 1/4.
As far as our width, it will be at about 4 inches and depth overall is going to be about 3 and 1/2. And, that's going to do it for our look at the Lippert components Tucson high speed, fifth wheel RV landing gear motor.
Customer Satisfaction Score:
85% were satisfied with this product
15% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor - LC141893
Average Customer Rating: 4.7 out of 5 stars (38 Customer Reviews)
by: Rory03/06/2023
This works fine but not much faster than the original. If I was to do it again I would purchase the heavy duty motor rather than the fast one because I believe the strain of weight slows it down and there would be less strain on the heavy duty motor
by: Stan03/18/2019
I have a 2011 Heatland Graystone (29mk model). It has aways strained to lift the front off my truck and more times than not, it would blow the 30amp fuse (which is in a difficult place to replace). I got smarter and replaced the fuse with an auto reset type fuse. But putting that much strain on the motor causes it to ware out.
After reading a couple articles mostly on etrailer I decided to go to a dual motor set up. I measured the length of the leg and called in my plan to your support team. I matched my existing motor so the speed of both motors is the same. The mechanical process was pretty easy, pull the old following leg and put in the new lead leg and connect the gear box and motor. Electrical is easy too, and I cheated for one switch by cutting the wires off my old switch and spliced the new switch in. (NOTE, mark the black leads before cutting them off, so you know which one is for ground and which one is for motor).
Because my motor arrived with a one lead slightly damaged, and because the motor didn't come with mounting screws, and no instructions on anything, I dropped the rating to 4 starts vs. 5 stars. Even the link you sent with additional instructions didn't have any. Also the switch wiring to the motor had to be reversed in order to have the extend button make the leg extend, and retract do the same. (ie red lead to black lead on the motor, etc)
by: Gerald05/31/2024
It works but really isn't that much faster than the "slower" OEM was.
by: Aristides05/07/2024
Exact match to OEM! Great support from Brittany all the way thru the project...
by: Larry 03/21/2024
Great product, on time delivery. Works great, would recommend. Amy is great person to work with.
by: Bj01/02/2020
My fifth wheel had an old Atwood leg assembly, so I wasn't able to find a replacement for the original part, Atwood #71113. I did find some suggestions on here that this motor would work as a plug-and-play replacement. Happy to report that is exactly what this was plug and play. Just had to twist the gear slightly so it lined up with the new motor, fit the new part on, screwed it in and hooked up the wires. Took me about five minutes all told.
One weird note, it did reverse the directions from the original Atwood switch. So pressing "extend" now retracts, and vice versa. The switch was put in pretty tight so I just used tape to relabel the buttons.
Bj
1/4/2021
Still going strong.
by: Mike 05/12/2020
I received the Lippert high speed motor in 3 days. It was an exact fit upgrade from the original motor on my Cedar Creek fifth wheel landing gear. The high speed motor is quieter and considerably faster than the slow grinding original. Thank you etrailer.
Michael T.
5/12/2021
One year later and my Lippert high speed motor has been a great improvement for my landing gear.
by: Russell 08/23/2023
Haven't installed the motor yet, but the service and delivery were excellent.
by: Stephen09/01/2021
This motor was a perfect upgrade for my LC142178 motor. Easy to install and landing gear moves noticeably faster. It does put more strain on the batteries than the slower motor, so make sure you are fully charged.
The only issues I had we're that one of the mounting bolts was bent and (as mentioned in other reviews) the wiring is backwards from the factory installed motor. You either need to reverse the wiring hookup or use the switch in the opposite direction of what you want.
by: Michael 09/07/2022
It is faster than the standard motor. Installed fairly easy on our Jayco.
Seems quieter than the removed motor.
by: John 03/29/2021
Works well so far! Spent a bit more for this motor due "back order" status on a different model #. Hopefully this one lasts! It's a replacement one I purchased and installed from a local trailer parts house a couple of years ago.
by: Bailey07/20/2020
Although this is presented as a direct replacement for an Atwood/Lippert MPD 71119 motor. It’s Isn’t.
You’ll need to trim the mounts to 3/8 inch. Works fine though.
But, since you can’t find the MPD 71119 anymore, I think this is your only recourse.
by: Daniel 05/22/2021
etrailer has the best customer service. This motor was an exact replacement of the one on my camper. Delivery was quick.
by: Tony04/20/2022
Motor is super quiet and still going strong 1 year later.
by: Ned 12/02/2021
it works great. may want to chance other one. later.
by: Carla 11/02/2020
We are so grateful. Fast service and it’s works great!!!
by: Keith09/28/2022
Easy to install and works good !!
by: Robert H10/04/2020
Works great
2012 cougar Highcountry 299 Rks
Perfect fit
Sales great
Prompt delivery
by: Ken06/24/2018
Fit and worked as advertised
by: Ricky 10/12/2023
by: Rick 07/10/2021
Fast delivery & great service!
by: David 10/01/2022
by: Jared08/27/2022
by: Richard 03/18/2023
by: Charles W12/02/2023
25
38
Show More Reviews
See what our Experts say about this Lippert Accessories and Parts
- Landing Gear Motor Replacement for 065-041012-01 with 7140 RPMBased on the info you found on the landing gear motor you have the correct replacement landing gear motor would be the # LC141893. Your design is very common and there are others that would work since it's very common so you could use the part # LC196308 as well.
view full answer... - Recommended Replacement Landing Gear Motor for Venture M-9000From what I have found, your old motor was the M-9000 motor gearbox used on the LGS-9000 landing gear. The Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor # LC141893 has the same dimensions and will work as a replacement. This motor has a speed of 7,140 rpm which will get you closer to the 9,000 rpm you were looking for. It has a 5,000 lb capacity. I have attached a video review for your reference.
view full answer... - Troubleshooting Lippert Landing Gear Motor 1-065-041012-01 Blowing Fuse Under LoadI reached out to my contact at Lippert and since your landing gear motor is blowing a fuse as soon as it sees load he mentioned the issue is more than likely that the motor is not getting the correct voltage, with the less common cause being the landing gear is underrated for your trailer. I recommend using a multimeter like # PT89ZR to test the voltage at the motor while the motor is operating. You will need to make sure you are running solely off battery power and are not getting power...
view full answer... - Replacement Electric Motor For Landing Gear 1-065-041012-01Per conversation with Lippert, the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor # LC141893 is a compatible replacement for the 1-065-041012-01 electric motor you listed.
view full answer... - Lippert Model 1-065-041012-01 Motor Replacement Yes, you can just replace the motor for your Lippert model 1-065-041012-01, which is the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor # LC141893.
view full answer... - Gearbox and Motor Replacement Recommendation for Part Numbers 1-065-041012-01The correct motor to replace your Venture Landing Gear 5th Wheel motor, model 1-065-041012-01 is the Lippert Components Tuson High Speed Motor # LC141893, which has the same 7,140 RPM speed as your existing one. The correct gearbox to go along with it is part # LG-179015.
view full answer... - Landing Gear Replacement for Trailer with Atwood JacksThe picture you submitted shows the motor (MPD 71119 ) for a standard Atwood landing gear jack set like the Stromberg Carlson kit part # LG-1. If you are wanting a direct replacement you would want the part # LG-1 as Atwood is no longer in business and this set is made to same specs.
view full answer...
- Replacement Motor for Lippert Model 1-065-041012-01 Landing GearThe correct replacement for your 1-065-041012-01 motor is part # LC141893 from Lippert. Your original motor had a 7140 rpm speed. The Stromberg-Carlson # LG-196308 you specified has a 5430 rpm output, so it wouldn't be a good choice. You'll want the replacement motor to match the output of the original. I've linked you to a product description video for the replacement motor.
view full answer... - Replacement Landing Gear Box for Model 1A065012-02-01 Landing GearGiven the model numbers you provided the Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear # LG-179015 would be the correct replacement landing gear box. A gear box such as the Aluminum Gearbox for Stromberg Carlson Landing Gear part # LG-179015 will not have an RPM rating nor will the output of the motor be tested here. The gear box will instead have a reduction ratio which for this unit is 3:1, which is the same that you mentioned. The Lippert Components Tuson High Speed...
view full answer... - Where is Lippert Landing Gear Motor ManufacturedYes, the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor # LC141893 is made in the USA.
view full answer... - Option to Replace Atwood 71119 Landing Gear MotorThe best option to replace your Atwood 71119 landing gear motor is the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor # LC141893. Note that you'll have to trim the legs slightly to make it fit, but this is the best option since that motor doesn't exist anymore. Otherwise, you could always replace the entire set if you'd like with the Stromberg Carlson Electric Landing Gear Set # LG-1.
view full answer... - Stronger/Faster 5th-Wheel Trailer Motor Recommendation to Replace Lippert Venture Landing GearIf you are looking for a higher-speed 5th wheel trailer motor, I recommend the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor # LC141893 for your 2011 XLR lite 300L10. The Tuson has a 7,140 RPM rating compared to the Lippert Venture 5th Wheel RV Landing Gear Motor # LC142178. However, as far as load capacity, the Tuson has the same 5,000 pound capacity as the Venture (with 2 legs/single motor).
view full answer... - Replacement Motor and Gear Box For 2003 Keystone Hornet 5th Wheel TrailerThe best way to tell if it is a motor issue or a gear box is to use the manual crank. If it is the motor, the landing gear will function perfectly with the manual crank. If it is the gear box, then you will have a very similar issue with the clicking. If it is the motor, I recommend the High Speed Motor # LC141893. If it is the gearbox as I suspect, I recommend the Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear # LG-179015. If you remove your motor and gearbox...
view full answer...
- Replacing Ultra-Fab Landing Gear With Lippert Landing Gear With High-Powered MotorThanks for all that good info, and what you have is the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010, which you can replace with a Lippert set with a high speed motor on you RV, though you will need to have new brackets welded on. The issue is that the Ultra-Fab has an uncommon 20-1/4 inch space between the mounting brackets, while Lippert and most others have landing gear with the standard 17-1/2 inches. So if you were okay with having new brackets welded on to meet the spacing...
view full answer...
- Availability of Replacement Tuson Landing Gear Motor for Landing GearI recommend the heavy-duty 6500-lbTuson motor, part # LC196308 for your landing gear. This motor is easy to install and requires no assembly. The Tuson High Speed 5th Wheel RV Landing Gear Motor, part # LC141893 has a weight capacity of 5,000-lbs.
view full answer... - Replacement Landing Gear Motor and Gear Box For Model 1-065-041012-0 On 2009 Keystone Montana I would be happy to make a recommendation for you! To replace the 1-065-041012-01 motor on your 2009 Keystone Montana I recommend the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor # LC141893 which has the same 7140RPM speed, and for replacement gears I recommend the Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear # LG-179015 which uses an aluminum case making it quite a bit stronger than the factory gearbox with a plastic case. I included videos of...
view full answer... - Landing Gear Set on Keystone Montana Blows 30 Amp FuseThere will be some play in the landing gear motor yes, this is normal and not anything to be worried about. The first thing you are going to want to do is manually operate the jack leg. If there is any resistance within the leg then it will need to be replaced with part # LC178653 for the lead leg or part # LC178652 for the follow leg. If there is not any resistance then take a multimeter and test for power at the motor. If you don't have at least 12 volts then you have a wiring/ground...
view full answer...
- 2006 NuWa Discover America Landing Gear Replacement MotorIf it has recently slowed down there may be a weak battery or wiring issue that you need to look at. After confirming your battery has a good charge. Check the connections either the connectors are corroded and not making good contact or the wiring has been compromised. If the wiring is in good shape and the connections look good then the motor may very well be going bad. The gear box will slip and clang and even produce a ratcheting sound but really doesn't effect speed. It just goes or...
view full answer... - Troubleshooting Landing Gear Issue On 2008 Weekend Warrior LED 3505It does sound like you have isolated the issue indirectly. If you can move everything manually without issue, then the screws in the legs are fine. The gearbox works fine under manual load, so gears are fine, and motor seems to work fine, so the issue most likely isn't your landing gear. The issue could be a weak battery. I recommend testing your battery to make sure it is charged. The 3:1 ratio is standard on landing gear but you can upgrade the motor speed for faster lift using...
view full answer... - Replacement Switch and Motor Options for Stromberg Carlson Electric Landing Gear Struggling to LiftReplacement electric landing gear motors are available in either standard, high speed, or heavy duty options. If what you have on there now is a standard motor and it is really struggling, your best option is to go with a heavy duty (higher capacity) motor, like # LG-196308. This motor has a weight capacity of 6,500 lbs and right around the same speed (5,430 rpm) as the standard version, # LG-142178, which is only rated for 5,500 lbs and 5,500 rpm. A high speed motor, like # LC141893,...
view full answer... - Will Lippert Motor 141893 Replace Atwood 71113 on 5th Wheel TrailerYes, the the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor # LC141893 will absolutely work to replace the Atwood 71113 motor on your fifth wheel. Motors are very much interchangeable so the fact that one was on a camper and yours is on a fifth wheel isn't going to factor into if it will work or not so you're good to go! I've added a link to a video review of the motor for you to check out as well.
view full answer... - Can Lippert Motor be Used to Replace Atwood Landing Gear and Motor 75721I reached out to my contact at Lippert who said that replacing the motor alone with a Lippert motor like part # LG-142178 or # LC141893 wouldn't work but if you replaced your Atwood gearbox with the Replacement Gearbox # LC276602 then you can definitely keep your current landing gear legs. I'm not sure who you spoke with at Lippert but this is something that we've been told by them for a while now and I called them again just to make sure that nothing had changed (and it hadn't).
view full answer... - Higher Rating Landing Gear Jack Motor for 1-065-041012-01 12 VoltBased on the part number you mentioned you currently have the part # LC141893 which is rated for 5,000 lbs. The higher rated 6,500 lb motor part # LG-196308 would have more capacity.
view full answer... - Availability of Replacement Landing Gear Motor with 7,140 RPMWe do have the motor you are looking for with the part # LC141893 which is 7,140 RPM like what you have now.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Kathleen M
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Rory
3/7/2024
It was no faster than the original and not worth the money to me I ended up replacing the entire landing system with a dual motor individual controlled landing gear set up