Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2"
(30 reviews)
Price: $225.97
In Stock
Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2"
Item # LG-177201
Retail:$249.39
Our Price: $225.97
You Save: $23.42
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (30)
- Q & A (0)
- Videos (3)
- Photos
Stromberg Carlson Accessories and Parts - LG-177201
- Camper Jacks
- Trailer Jack
- Legs
- Follow Leg
- Stromberg Carlson
Replaces the follow jack from your Stromberg Carlson landing gear. Designed for use with models LG-2 and LG-4. Follow leg connects to the lead jack in your landing gear set with a cross shaft (not included).
Features:
- Replaces the follow jack for your tandem landing gear
- Designed for use with Stromberg Carlson models LG-2 and LG-4
- Can be used with most electric landing gear sets, including Atwood, Venture, and Lippert models
- Connects to the lead jack in your landing gear set with a connecting rod, or cross shaft (not included)
- Constructed of heavy-duty steel
- Made in the USA
Specs:
- Total lift: 34-7/8"
- Travel: 19-7/8"
- Drop leg: 15"
- Leg length: 33-1/2"
- Weight capacity: 4,000 lbs
LG-177201 Stromberg Carlson Replacement Follow Leg for Venture Landing Gear - 33-1/2"
California residents: click here
Video of Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Stromberg Carlson Landing Gear Replacement Lead Leg Review
Hi there fifth wheel owners. Today we're going to be taking a look at Stromberg Carlson's line of replacement landing gear legs. We're going to be looking at both the leading as well as the following leg. These are available in either a 33 and a half inch or 29 and a half inch drop. And there is a difference between those and how it's going to fit in your fifth wheel, so stick along with us, and we're going to show you how to take the appropriate measurements to determine which one's best for you. Here on the inside, you can get a better look at our leg here.
And what you're going to be getting is just the leg that you see here. The leg is going to include the black outer sheathing here. It does have the attachment point at the top for our shaft to connect to, but the shaft does not come included with it.Brackets that it attaches to also don't come included. You'll be reusing those as well. Because the main purpose of these replacements is just for if you have a damaged leg, because in most instances, if your leg gets damaged, it's usually because of an accident.
It does happen. You leave your legs down, you hook up your truck to your fifth wheel, and you start to take off, move a little forward, and the next thing you know, your legs are now damaged. Rather than spend a bunch of money replacing the entire system. We can replace just the damaged components. This is the same leg we we're just looking at, and this is where it extends down through our trailer, the bottom of our tube here.
Coming out of our tube, we have the extension here that is operated by our motor, or if you have a manual crank. And it also includes the drop-leg down here.What you don't get is the quick release here. We do have these available here at etrailer. We just reused the customer's old one. And in most cases, your old hardware is going to be able to swap over, so if it didn't get damaged, then you can just go ahead and reuse it.
The foot also does not come included, but you will receive a new pin. This pin can either be used to attach a foot, or if you don't have a quick link, you can use this pin to operate your drop leg. You just have to pull the pin out, the leg will drop down, and then you have to manually re-insert the included pin over here.Over here we've got our lead leg, and this is going to be very similar to your following leg. The difference is the shaft that comes out of it is designed to hook to your motor or your manual crank. You will get a little bit extra hardware with the lead leg, because you'll get the collar and attachments. You can see the new hardware here, where it attaches to both the cross shaft, as well as the collar that holds our motor and motor transmission in place. The 33 and a half inch length legs are going to be a direct replacement for Stromberg Carlson's LG-2 and LG-4 systems. The 29 and a half inch legs are going to be a direct replacement for Stromberg Carlson's LG-1 and LG-3 systems. Now regardless of which one you get, they're going to have a total lift of 34 and 7/8ths of an inch. And that's going to be the amount that comes out plus the drop shaft.Now you may not be aware whether you have a Stromberg Carlson or what model yours is, whether it's an LG-1 or 2. The best way to determine if this leg is going to work with your system is to use some measurements. We're going to go ahead and show you how to take some measurements, because this is not going to work with just the Stromberg Carlsons. It'll work with any system, as long as your measurements line up. So we're going to go ahead and head into the shop and we're going to compare one of the customer's original legs with our new one, and we're also going to show you how the measurements you'll want to take, where you want to take them, and how to use those to purchase the correct leg here on our website.We've got our old jack sitting next to our new jack here. So you can see these are identical, but what you want to check beforehand, and you can do this while this is in here, because you can see where our bolt used to pass through, we want to measure the distance between our tabs. Because these are actually the mounting tabs that hold it in here. It'll rest on the brackets, and those bolts ensure that it's going to stay rested on those brackets. We're going to measure from the outside of our tab to the outside of our tab, and we've got 21 and a half inches here. The most common sizes are going to be 21 and a half inches like we've got here, as well as 19 and a half inches. That's the slightly smaller size, but those are the two most common.The last measurement we need is the total length measurement, and that's going to be from the bottom of our painted surface here, because this is what moves, it actually extends. We want the stationary portion and we want to measure from top to bottom, and we're measuring 33 and a half inches. The two most common sizes are going to be 33 and a half like we have here, and the smaller size, which is typically 29 and a half. More often than not the 29 and a half is going to have that 19 and a half distance, and with our 33 and a half, the length measurements here, most often, you're going to have that 21 and a half for your tabs. Once you've got your measurements taken, you can verify on our website here, when you're looking at the jacks that you are considering purchasing to make sure they're all going to match up with your old one. And that completes our look at Stromberg Carlson's line of replacement landing gear legs..
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2" - LG-177201
Average Customer Rating: 4.7 out of 5 stars (30 Customer Reviews)
Replaces the follow jack from your Stromberg Carlson landing gear. Designed for use with models LG-2 and LG-4. Follow leg connects to the lead jack in your landing gear set with a cross shaft (not included).by: Elaine 05/10/2024
We have not installed yet but the customer service and shipping was great!
by: Debra 09/12/2023
Works great still- one year later. Easy to install. E trailer was great to work with. Definitely our first place to look for parts.
by: Steve05/21/2023
While this is the correct length for our Carriage Cameo 5th wheel, the expanded outer tubes that secure the landing gear to the RV frame are in the wrong place. No doubt this works fine for most 5th wheels, but the Carriage 5th wheels require a special leg that is readily available directly from the Venture Mfg. See photo of the OEM special leg made for Carriage and this more common unit.
by: Dave B 11/04/2016
I have a 36ft toy hauler as I was about to park it after a weekend at the dunes I was lowering the Landing gear and nothing motor turned no lift :( called etrailer and they were great they knew everything I needed and had it in stock , here's the best part shipping was very fast!!! , I installed the new replacement legs today and fit like a glove wow I'm back in business !! !!
by: Clay 03/27/2024
Came on time 2 day delivery you couldn’t ask for much more
by: James09/22/2018
Other than having to grind off some material from the insides of the locator tabs on the sides because they would not fit flush they work good. The people at etrailer are great to work with and the landing gear came in 2 days. Thanks
by: Chuck S.12/03/2016
I purchased "landing jacks" for my 5th wheel trailer and had a great experience dealing with "etrailer.com". Even thought I ordered the incorrect item the first time, "etrailer" was excellent in providing me with return instructions; and refund. Upon ordering the correct items, items provided were correct and I installed them without any issues. I would highly recommend "etrailer.com"
by: michael d.03/30/2017
I couldn't have received better service ! Dana was amazing and I always tell my friends about the great service she provided for me. I received emails start to finish from her the only thing Dana could have done more would have been install the landing gear for me ! as far as the product it is very good quality .
by: David H.04/10/2017
Order re[placement leg for a landing gear on a 5th wheel. The people at etrailer were very helpful, especially Pat, who took the time to research the part that I needed.
by: John05/11/2019
The LG 177201 fit perfect. I removed the top cap and added more lithium grease. Some of the other E trailer down legs are equipped with grease zert fittings. This would have been a nice feature
by: Brand C.10/18/2018
excellent and exact replacement for my broken landing leg on my 5th wheel
by: Dwight01/18/2019
Tim thank you
the landing leg LG-177201 is a match for the vm900.
even the gear Rachel was the same. and it came a day early.
great product at a good price.
by: Bill 03/20/2020
Made in USA ,great price, will install today and am sure it will operate as expected. David found what I needed and provided fine service.
by: George 10/03/2022
Perfect fit. Quick delivery
by: William 09/01/2021
Just what I ordered and they were perfect. Thanks Bill
by: Michael11/26/2018
There is nothing they could do to make this better experience, including the thoughtful follow up. Thanks to all of you.
by: Ray 07/06/2021
Worked well. Easy to install
by: Brian 01/28/2021
Works great
by: Ronald 06/06/2021
Exact fit. Seems to operate just fine. Very surprised I received it is a couple days.
by: Philip 10/07/2019
Went right in and worked
by: William11/27/2018
Good quality and fair price.
by: Sheridan Sauer07/26/2018
Thank you so much. They were quick getting here and easy to assemble!
by: Steve 06/03/2021
Very fast delivery. Part fit perfect
by: Lorraine 09/18/2023
by: Terri 07/27/2023
25
30
Show More Reviews
See what our Experts say about this Stromberg Carlson Accessories and Parts
- Replacement Follower Leg Recommendation for 2011 Jayco Eagle Super LiteWhat you need is the Stromberg Replacement part # LG-177201 for the follow leg and part # LG-177202 for the lead leg. These match the weld brackets you have and are longer than the 179014 you have as well.
view full answer... - Replacement Slave/Follow Leg for Atwood Landing Gear 71415 on 1999 Damon HornetFor a replacement slave leg in your Atwood landing gear set up 71415 you can use Stromberg Carlson, # LG-179014. The lead leg, just in case you want to know, is part # LG-179013. Each leg has a 3,000 pound capacity. These legs have many of the same parts because there is essentially an industry standard for this size leg. Atwood is no longer in business.
view full answer... - Replacement Follower Leg for Venture Landing GearYour Venture landing gear should be manufactured by Lippert. For a replacement follower leg use # LG-177201.
view full answer... - Inner Leg Travel of Replacement Follow Leg # LG-177201For the Replacement Follow Leg # LG-177201 that you mentioned it has a travel length of 19-7/8 inches.
view full answer... - Can the Stromberg Carlson Electric Landing Gear Set LG-4 Be Bought Without the MotorIn order to piece together a kit similar to the Stromberg Carlson Electric Landing Gear Set part # LG-4 but without the motor you will need to obtain the following: Replacement Lead Leg for Stromberg Carlson Landing Gear - part # LG-177202 Replacement Follow Leg for Stromberg Carlson Landing Gear - part # LG-177201 Replacement Footpad and Pin for Stromberg Carlson Landing Gear - part # LG-119225 (2) Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear - part # LG-179015 Replacement...
view full answer... - Replacement Lead and Follow Legs for Venture VMC900R Landing Gear for RVIf you are in need of a replacement lead leg for your Venture vmc900r you'd want the part # LG-177202 or for a follow leg part # LG-177201. The lead leg is the one you'd attach the crank handle to and the follow leg is the leg that is opposite of that one.
view full answer... - Replacement Landing Gear Driver Leg for a 5th Wheel TrailerIf the landing gear on your 5th wheel trailer is made by Lippert (LCI), Stromberg-Carlson, Venture, or Atwood then for a lead leg you could use # LG-179013 for a 6,000 pound system (the leg is rated at 3,000 pounds). The matching follower leg is # LG-179014. The replacement motor would be # LG-196308. We also have # LG-177202 which fits 8,000 pound systems that have dual motors or 5,000 pound systems with a single motor. The matching follower leg is # LG-177201. If you have a different...
view full answer... - Replacement Follower Leg Recommendation for Landing Gear Set VMC900LThe correct replacement follower leg for your set that has model number VMC900L is the part # LG-177201. If your other leg is still working fine there would be no reason to replace it at this time.
view full answer... - Replacement Follow Leg For Venture VMC900L-339302 Landing Gear LegThe Replacement Follow Leg # LG-177201 matches your current leg at 2-1/2" square on the outer tube with the length of the outer tube being 33-1/2". We also have the Replacement Lead Leg # LG-177202, Aluminum Gearbox # LG-179015 and Motor Kit # LG-217884 that are compatible with these landing gear legs if you want to update all the components with your landing gear.
view full answer... - Replacement Landing Gear For a 1999 Fleetwood Prowler 255 With Mounting Tabs Spread 19" Apart It sounds like you have the Stromberg Carlson Electric Landing Gear Set # LG-2 or one similar. This set uses legs 33-1/2" long with the distance between the mounting tabs being 19-1/2". We do offer the Lead # LG-177202 and Follow # LG-177201 legs separately if those are the only parts needing changed. The legs are compatible with other landing gear sets from Atwood, Venture, and Lippert using the same size legs.
view full answer... - Can Trailer Landing Gear Be Damaged Internally By Lowering Too Far?Landing gear legs do typically have weld stop brackets to hold the legs securely to the welded brackets on your trailer frame. The landing gear will have a maximum capacity lift, which for the Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2" # LG-177201 you asked this from is 34-7/8 inches. That measurement comes from the 19-7/8 inches of physical internal travel and the 15 inch drop leg. The leg can be physically overextended or retracted too far which can cause the...
view full answer...
- Replacement Landing Gear Legs for a 2010 Jayco Eagle Super LiteI have attached a photo for you that shows how to properly measure the outer tube on a landing gear leg. I have not heard of a landing gear leg with a 36-1/2" long outer tube so if this is what you have then I recommend you replace both the lead and follow legs so that you can be sure they match. For this, the correct replacement for you should be part # LG-177202 for the lead leg and part # LG-177201 for the follow leg. In order to make sure they will work you need to measure between...
view full answer...
- Troubleshooting Venture Landing Gear Follower Leg that Stopped WorkingBefore you replace the landing gear replacement leg you could try the follow leg repair kit, # LG-146060 to replace the bevel gears. The next step would be then to replace the entire follower leg with part # LG-177201.
view full answer... - My Follow Leg Has Different Gearing Than the Lead LegI have an option to get the legs on your 1998 Nash 29.5 Fifth wheel to even out, but unfortunately gears are brand specific, so you won't be able to install replacement gears that will even out the gear ratio between two different brand legs. The most efficient option is to replace the lead leg with the matching Replacement Lead Leg for Stromberg Carlson Landing Gear # LG-177202. Replacing the leg will enable you to keep the legs moving at the same speed and will even out your trailer.
view full answer... - Replacement Landing Gear Leg for a Venture VMC900R Landing Gear SystemThe VMC900R-263829 part number comes back to a Venture VMC900R system. The correct leg will be determine by the length of the outer tube. If it is 29-1/2" - Replacement Lead Leg for Venture 5th Wheel RV Landing Gear # LC119102 (Lead leg) - Replacement Follow Jack w/ Drop Leg for Stromberg Carlson Landing Gear # LG-179014 (Follow leg) If it is 33-1/2" - Replacement Lead Leg for Stromberg Carlson Landing Gear# LG-177202 (Lead leg) - Replacement Follow Leg for Stromberg Carlson Landing...
view full answer... - How To Choose the Correct Replacement Landing Gear Leg for a 5th Wheel TrailerThere are basically two different types of landing gear legs. In order to make sure you get the correct one, we need to first measure your outer tube. The two most common outer tube measurements are 29-1/2" and 33-1/2". Once we have the outer tube measurement we can then measure the distance between the weld stops (inside to inside). This distance on the 29-1/2" long outer tube is 15-1/2" whereas it is 19-1/2" on the 33-1/2" long outer tube. I have attached the correct replacements based...
view full answer...
- Replacement Landing Gear Legs for Set with Number VMC900RI spoke with my contact at Stromberg Carlson who confirmed that the Replacement Lead Leg # LG-177202 will work well as a replacement for your Venture VMC900. Then for the matching follower leg you would want the part # LG-177201.
view full answer... - Does etrailer.com Landing Gear Have Same Ratio as Atwood Landing GearSo the Atwood landing gear box that you have has a 3:1 ratio which is the same ratio as what comes with the etrailer.com Landing Gear part # RVLG-8000 that you referenced. For a replacement follow leg for an Atwood landing gear set you'd want the part # LG-177201.
view full answer... - Could Stromberg Leg Work for Replacement Landing Gear for 2012 Keystone MountaineerYes you can use the replacement follow leg # LG-177201 to replace the leg you have. Venture, Stromberg, Lippert, and LCI basically all make the exact same jack legs.
view full answer... - Replacement Follow Leg For RV Stabilizer GearGreat question, I do need some more information though. There should be a sticker or stamp somewhere on the legs of the jacks. We need to find out the make and model of the actual unit so we can get the proper one. This information is needed because each brand will have differences in materials, ratios, even balance that can cause the unit to fail or work improperly and cause damages. Also if we get the model number we can get the correct weight capacity and not have to worry about...
view full answer... - Landing Gear Legs Move Very SlowlyThere are two things that could be happening. The first is that your motor is not rated high enough and the second is that there is something bent inside the jack tube. In order to determine which is the correct problem you have I recommend using the manual override feature on each leg. Do you have noticeable resistance or hear any noise? If so then there is most likely something bent inside the jack tube. If that is the case then you would need to replace it. If the weld stops on your...
view full answer... - Replacement Follow Leg for Keystone Raptor Velocity with Landing Gear Part M-9000-PKBased on my research your Keystone Raptor Velocity is equipped with Venture Landing Gear. The part number M-900-PK that you found on the lead leg indicates that the correct replacement Follow Leg should be the part # LG-177201. For just the repair kit you will use part # LG-146060. The leg itself measures 33-1/2 inches long and there is a distance of 19-1/2 inches between the weld brackets. I do recommend verifying that this matches your current landing gear legs to ensure that this will...
view full answer...
- Replacement Landing Gear Follow Leg for 2003 Keystone EverestWe can get you un-stranded! The correct follow leg for your landing gear is going to depend on how long it is. If your leg measures 29-1/2" (see attached photo), you would need replacement # LG-179014, which can be used with most landing gear sets Atwood, Venture, and Lippert models. The same is true of replacement # LG-177201, which you would use if your leg measured 33-1/2". I've attached a link to a video review for you to take a look at as well.
view full answer...
- Replacement Venture Lead and Follower Legs for Venture Landing Gear on 5th Wheel TrailersThe replacement landing gear leg # LG-177202 is rated for 4,000 pounds for an 8,000 pound system using either manual crank or dual motors. For a single motor it is rated for 2,500 pounds. The matching replacement follower leg is # LG-177201. Lippert makes these legs now. They acquired Venture in 2004 or 2005 so since you have a 2009 toy hauler these are the correct replacements.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
DeAnne T
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Kathleen M
Video Edited:
Dustin K
Updated by:
Laura H
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Mike S
Updated by:
Matthew E
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
9/22/2019
Great