Parts Needed to Convert Surge Disc Brake EZ Loader Trailer to Electric Over Hydraulic
Question:
I have a 2019 EZ Loader boat trailer with surge brakes. I want to convert it to electric over hydraulic and replace the tongue coupler with a straight coupler. The trailer has the Dexter PG1095 actuator on it right now, and the bolt pattern is different than any coupler I see on your site. Is it ok to drill holes in this coupler to match the current hole pattern? Or do you know of a coupler that will match?
asked by: Chris R
Expert Reply:
If you wanted to drill holes in the Demco Coupler # DM13203-95 to make it easier to attach to your trailer frame you certainly could. Just be mindful where you drill the holes and don't turn it into swiss cheese.
When it's time to pick out an electric over hydraulic kit I would highly recommend the Hydrastar actuators as they are the most reliable and among the quickest reacting. For a kit that comes with everything for your trailer you would want the # HS481-8067.
Products Referenced in This Question
Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes - OEM - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1600 psi
- Disc Brakes
- Hydrastar
more information >
Product Page this Question was Asked From
Demco Channel Tongue Trailer Coupler - Zinc - 2-5/16" Ball - 3" Channel - Bolt On - 18K
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2-5/16 Inch Ball Coupler
- Bolt-On
- 18000 lbs GTW
- 3 Inch Channel
- Auto Latch
- Demco
more information >
Continue Researching
- Shop: Demco Channel Tongue Trailer Coupler - Zinc - 2-5/16" Ball - 3" Channel - Bolt On - 18K
- Search Results: electric~hydraulic brake actuator
- Shop: Dexter Zinc-Plated Straight-Tongue Coupler - 21,000 lbs
- Shop: Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes - OEM - 1,600 psi
- Shop: Hydrastar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness - 1,600 psi
- Shop: Tailgate
- Shop: Base Plate for Tow Bar
- Shop: Brake Controller
- Video: Spectro Trailer Wiring Junction Box Installation
- Video: HydraStar Marine Electric Over Hydraulic Actuator Installation
- Search Results: kodiak disc brakes
- Search Results: kodiak disc brake kit 8 rotor hub
- Search Results: kodiak brakes
- Search Results: brake line
- Search Results: brake hose
- Search Results: weigh safe
- Shop: Demco Channel Tongue Trailer Coupler - Silver - 2-5/16" Ball - 3" Channel - Bolt On - 21K
- Shop: Kodiak Disc Brakes - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet/Stainless - 5.2K to 6K - Oil
- Shop: Kodiak Disc Brakes - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5.2K to 6K - E-Z Lube
- Q&A: Total Length of Vertical Shank on B&W Tow & Stow 3-Ball Mount # BWTS20049B
- Q&A: Having Trouble Getting Curt Trailer hitch to Sit Flush on the Frame of a 2015 Toyota Highlander
- Q&A: Bolt Pattern and Corrosion Resistance For Titan Zinc-Plated Straight-Tongue Coupler - 21,000 lbs
- Q&A: Heavy Duty 2-5/16" Bolt On Trailer Coupler Made In The USA
- Q&A: What PSI Hydrastar Actuator is Needed for Boat Trailer Disc Brakes
- Q&A: Does Trailer Coupler Need to Sit Flat Against the Top of Trailer Tongue
- Q&A: Fixed Coupler Options To Replace UFP A-60 Surge Couper For Boat Trailer
- Shop: Suspension Enhancement
- Video: Review of Blue Ox Signature Series Lift Brackets For SwayPro Weight Distribution Systems - BXW4021