Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System - Qty 1
(90 reviews)
Price: $496.61
Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System - Qty 1
Item # LC305340
Retail:$689.44
Our Price: $496.61
You Save: $192.83
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (90)
- Q & A (0)
- Videos (1)
- Photos
Lippert Accessories and Parts - LC305340
- Camper Jacks
- Trailer Jack
- Legs
- Driver Leg
- Lippert
Replaces 1 lead leg for your Lippert Ground Control 3.0 automatic leveling system (LC358590 or LC675817). Leg can be used in either the right or the left-hand configuration.
Features:
- Replacement lead leg for your Lippert Ground Control 3.0 electric leveling system (LC358590 or LC675817)
- Leg can be used in either the right or the left-hand configuration
- Weight capacity: 5,000 lbs
- Quantity: 1
305340 Replacement Front Leg for Lippert Components Ground Control 3.0 Electronic Leveling System - Qty 1
Video of Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Lippert Replacement Ground Control 3.0 Lead Leg - LC305340
Hi, there. I'm Michael with etrailer.com. Today we're gonna take a quick look at this Lippert Components Replacement Ground Control 3.0 Lead Leg. This is gonna replace one damaged lead leg for your Lippert Ground Control 3.0 Automatic Leveling System. This is going to work for both models that you see on the screen there. So if you have either one of those, you can trust this is going to be an exact replacement for you.
So no worries about fit issues, or compatibility problems, or anything like that. It is just gonna plug right into your existing wiring. So very simple to get it integrated back into your system, so that you have a fully functional leveling system again. This can be used as either the right or the left hand configuration for your front legs there, and it will have the same 5000 pound weight capacity. Now, a couple of things I do want to point out.
This is not going to include the drop leg adjustment pin. But we do have those available here at etrailer.com. So if your original isn't in good condition anymore, you can purchase that replacement. And we also do not have the pin that holds your foot plate to that drop leg. So again, if you have the original still, you can use that, or we do have a replacement available for you, so that you can get that connection made.
So overall, great option here. If you are needing to replace one of those front legs or lead legs for your leveling system, this is gonna be exactly what you need. That completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Arrived Damaged
- Alternate product found
- Wrong item was ordered
Customer Reviews
Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System - Qty 1 - LC305340
Average Customer Rating: 4.8 out of 5 stars (90 Customer Reviews)
Replaces 1 lead leg for your Lippert Ground Control 3.0 automatic leveling system (LC358590 or LC675817). Leg can be used in either the right or the left-hand configuration.by: Denny 05/16/2024
As advertised, part was direct replacement and fit like it should, no trouble install and is still working perfectly 1 year later
by: Michael 03/20/2024
From the time I ordered this part to the time I received it, the communication was constant. And while the estimated ship date was showing one day, when the item actually it shipped, the updated arrival date was one day earlier.
I would definitely recommend etrailer for all of your parts.
by: Melvin 03/24/2024
As usual etrailer had the parts I needed and overnight delivery is getting me back on the road.
by: Ronald 05/15/2024
Works great. Just one little thing. It can go in just one way and only one way, i did not see any markings and it looked the same on both sides I almost started to grind off some metal to make it fit but turned it around hit it with rubber mallet and it fit just perfect.
by: David W09/29/2023
Was a direct replacement for what we had. etrailer jumped through the hoops to overnight this to us in Wyoming. We were on our way to Canada when we had a jack failure.
by: Jim 04/10/2024
What a professional group. Quick shipping on part i needed and competitive prices. I was impressed with the email showing each person involved in moving product with their pics. Great job Tricia staying in touch. Thanks. Jim H
by: Michael 04/19/2024
Fast shipping and worked great
by: Justin06/14/2023
I was leaving my campsite on Sunday when my front leg popped and stopped moving. I figured out the part I needed and ordered it on Sunday. E trailer shipped it on Monday and I installed it on Wednesday. They were cheaper and faster than my local camping world. Great communication and I’m going to order another front leg soon since I’m sure they fail about the same time. It was easy to install.
by: Dale 07/14/2023
Good price, relatively fast shipping (arrived a day late from their estimate), and worked perfectly. I'm going to order just the leg to have on hand when the other side goes out. Usually, the electric motor is fine, but I have a spare now so, just the leg.
by: Mark04/28/2023
Thank you for working on Sunday’s etrailer!
I was in a bit of a bind with my 5th wheel trailer and a broken landing gear. Put my order in Saturday night, it was prepped Sunday, shipped Monday and I had it installed Thursday on the day they said it would arrive. Exact replacement for my damaged part. Awesome.
by: Rob08/24/2023
One package missing items
One package completely wrong items
by: Randy 06/05/2023
The replacement leg was right on the money plug and play
by: Chuck 02/16/2023
Lead legs and motors showed up just as described, and very fast shipping . They work perfect and at a great price with great communication through the process with e trailer . Thanks
by: Tammie 10/09/2022
Excellent! Exactly as described. Easy to install. Our new leveling leg has been working perfectly for the past 3 months. We were FINALLY able to home our Lippert leveling system after we installed it. You guys at etrailer always ship items quickly too. It is appreciated. Thank you. We will definitely shop with you again.
by: Gary 05/25/2023
Easy installation works great
by: Leland 07/09/2023
Ordered the part and it arrived two days before the estimated arrival date. Very pleased
by: Gerald 07/27/2023
Thx it got here on time and the price was excellent very happy I’m on the road again
by: Scott 08/16/2023
Great customer service and quick turnaround time!
by: Jay 04/12/2023
Fast delivery and great customer service. As always.
by: Jonathan11/09/2022
This part was exactly what we needed. One of our front jacks went bad and I couldn’t get the RV off the truck. The part arrived quickly and wasn’t damaged.
by: Brent 05/14/2023
The product arrived as advertised! It slide right into place. Install took 15 minutes.
by: Loren02/18/2018
Excellent service and shipping. Received part within the time frame. I installed the jack on my 5th wheel with no problems and it is still working great.
by: Charles 07/28/2021
We had just arrived at a new site location, and our jack went out. I had to manually crank it to level and then again to put it back on truck while doing work. We ordered this replacement and Etrailer delivered quickly before we had to move to next location. Once it arrived it was easy to install and have had no problems since.
by: Neil F.04/22/2019
The replacement part was the exact part I needed. It took me less then an hour to replace and I was able to reset the default in the controller and use the Auto Level feature without any issues. Shipping was fast. Had the part in a couple of days. this is the first time I have used etrailer and definitely will not be the last. Thanks Greg!
by: Don 09/14/2022
Parts received were the correct parts. Installation was challenging but entertaining. Parts integrated into the system as expected.
25
90
Show More Reviews
See what our Experts say about this Lippert Accessories and Parts
- Troubleshooting Lippert Ground Control 3.0 Electric Leveling System for Correct Jack FunctionOn the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote - 4-Point Set # LC358590 the best thing to do to check you level is to recalibrate your system. You do this by resetting your zero point. See the attached photo for assistance. If a single jack is having issue with the zero point, then you may have a bad motor, bad jack, or the controller module may be failing. The motor you should hear working so if you don't check the power wires and then...
view full answer...
- Out of Stroke Error on Ground Control 3.0The "Out of Stroke" error on the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System - 4-Point Set # LC358590 and 6-Point Set # LC675817 means that they have reached the max height, can no longer lift so you need to relocate your trailer, or that you have bent or damaged jacks that will need to be replaced. So you'll need to check those jacks to see if there are any that are damaged, and replace as needed with one of the following: - Replacement Lead Leg for Lippert Components...
view full answer... - Is Zero Point Recalibration Required with Leg Replacement of Lippert Ground ControlWe do have a replacement motor for the lead leg of the Lippert Ground Control kit you have on your 2016 Reflection 27RL with the part # LC343758 but it sounds like you'd rather do the entire leg assembly with part # LC305340. Since it's a new motor you'll want to reset the zero point as well. I attached a picture that details how to do this. You can try and see if it doesn't prompt you to do this but most likely you'll need/want to.
view full answer...
- Recommended Replacement Lead Leg for a Ground Control 3.0 On a 2021 Thor Hurricane Assuming you have the Ground Control 3.0 landing gear system on your 2021 Thor Hurricane, you'd just need the Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System # LC305340. This kit is going to come with a new motor, foot plate, and leg.
view full answer... - Availability Of Replacement Parts For Lippert Landing Gear 8000lbsIt sounds like you need a leg repair kit, or possibly two if both sides are damaged or worn. For the lead leg, which is the leg with the motor/crank attached to it, you will want to go with Lippert Venture Lead Leg Repair Kit # LC146059. For the follow leg, the leg without the crank/motor, go with Lippert Venture Follow Leg Repair Kit # LC146060. These kits are a fit for the Lippert Venture landing gear setup which seems to be what you have on your Arctic Fox 27-5L 5th wheel RV. While...
view full answer... - Replacement Landing Gear Legs for Lippert Ground Control 3.0It sounds like you have the Lippert Ground Control Auto Leveling Landing Gear 3.0 part # LC358590 and are looking for replacement front landing gear legs. For that you would want the part # LC305340 . The part number for the rear would be # LC344792 for the right and part # LC305339 for the left.
view full answer... - Replacement Front Jacks For Lippert Ground Control 3.0 Trailer Leveling SystemWe have the Replacement Lead Leg # LC305340 for Lippert Components Ground Control 3.0 Electric Leveling System # LC675817. This leg will replace either the left or right side and is only available as the entire assembly.
view full answer... - Troubleshooting Error on Front Right Jack of Ground Control Leveling System on TrailerWith the Error RF on your system, since the unit will not go up or down, I recommend checking the connection wires on that jack. If there is a lack of power to the jack, this error will occur. Test the wires using a circuit tester like # PTW2993. Next, test the jack using a 12V jumper wire and ground while disconnected from the system. This will help you know if the jack is bad, or if there is a connection that is bad. If the front leg is bad, you can use the Replacement Lead Leg for...
view full answer... - LF Error on Lippert Ground Control 3.0 4-Point SetI checked with Lippert, and the error like the LF error you are getting on your Lippert Ground Control 3.0 - 4-Point Set # LC358590 is typically caused by a wiring interruption. So according to them, you'll want to check the harness connections at your controller as well as the jack to see if they are fully seated and for any damage, and also check the fuses at the controller. Otherwise, should there be damage on either you will need replacements (depending on what is damaged): - Replacement...
view full answer... - Troubleshooting Lippert Ground Control 2.0 Leveling System Error CodeThere are a couple of things as I talked with my contact at Lippert. You will need to follow this system perfectly of the error will not clear. You need to extend the front jacks 6 inches, then the rear jacks 6 inches, and then press and hold the retract button until the jacks are all retracted. This should clear the error. If it does not, then use a multimeter like # PT89ZR check to make sure that left front jack is getting the proper battery voltage. If it is under 12V then it...
view full answer... - Troubleshooting Lippert Ground Control 3.0 Front Left Leg Not Retracting CompletelyIs the jack retracting at all? The Lippert Ground Control 3.0 # LC358590 front jacks should be retracting all the way under normal operation so if one of them isn't then you need to try retracting it manually by removing the plug on the motor and using a 5/16" socket to raise and lower the leg. If manual operation works just fine then that tells me the issue is the motor and it needs to be replaced with part # LC343758. If you're finding problems operating the jack manually then you likely...
view full answer... - Replacement Lead Leg Without Motor For a Lippert Components Ground Control 3.0 Leveling SystemYes, we offer the Replacement Front Jack for Lippert Components Ground Control 3.0 Leveling System part # LC362485 which is the same as the Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System part # LC305340 except it doesn't come with the motor and foot pad. The legs are the same for both sides so no worries here.
view full answer... - Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling SystemWe do offer the replacement legs for your 2015 Montana High Country 5th Wheels leveling system. You want the Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System - Qty 1 item # LC305340. This Replaces one lead leg for your Lippert Ground Control 3.0 automatic leveling system item # LC358590 or item # LC675817. He was correct the leg can be used on either the driver or passenger side.
view full answer... - Replacement Lippert Electric Ground Control Landing Gear Leg for Keystone CougarIt sounds like you have the Lippert Ground Control Electric Leveling System and in which case you will need the Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System part # LC305340 for the leg and motor or the Replacement Front Jack for Lippert Ground Control 3.0 Leveling System part # LC362485 for just the leg. These will both work on either side of the trailer, front left or front right.
view full answer... - Replacement Landing Gear Leg for a 2016 Keystone Montana High CountryIf you have the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part # LC358590 or part # LC675817 already installed on your 2016 Keystone Montana High Country then yes the Replacement Lead Leg for Lippert Components Ground Control 3.0 part # LC305340 will work to replace the lead leg. However, it sound like you are just looking for replacement landing gear leg for which you would need to use the Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear part #...
view full answer...
- How to Manually Reset Lippert Ground Control SystemTo manually reset your Lippert Ground Control part # LC358590 you need to hold down the retract and enter buttons at the same time. Try that but if you still get an error code you most likely have a low voltage battery that needs to be charged. Or if that's not it the wiring of the system needs to be checked out.
view full answer... - Recommended Replacement Leg For Lippert Ground Control System On 2015 Solitude 320X 5th WheelOn your Lippert Ground Control System, the cause of the failure of the nut inside the jack could be an overloaded trailer, a blent leg, a bent screw. A lack of grease can cause the nut or the screw to strip threads under load. If your trailer is under warranty you may want to start there. I recommend the Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System - Qty 1 # LC305340 that can be used on the right or left hand side.
view full answer... - Troubleshooting Out of Stroke Error Code on Lippert Ground Control SystemThe "out of stroke" error means you have extended the jack too far. If the jack will not retract using the touchpad then you will need to do so manually with the manual override on top or bottom (see photo). If you continue to get an "out of stroke" error or you cannot manually retract the jack then that would point to signs of damaged internals which means the jack leg would need to be replaced. I have attached a list of replacement jacks below. Front Leg - part # LC305340 Right Rear...
view full answer...
- Replacement Lead Leg Recommendation for Lippert Ground Control I wish we had just the leg portion of the Replacement Lead Leg # LC305340 but at this time the only way to get it is with the # LC305340.
view full answer... - Troubleshooting Squeaking and Out of Stroke Errors on Lippert Ground Control The noises you described in your question along with the "Out of Stroke" error message you're getting might be indicating some internal damage with the gears on the jack leg(s). The "Out of Stroke" error basically means that the jack has extended as far as it can go, so if you're getting the message after only 4 inches of extension then there's something preventing it from going further such as a bent pin or stripped gear, which would require that the leg get replaced. The only lubrication-type...
view full answer... - Replacement Leg for Lippert Ground Control 3.0 RV LevelerFor front leg replacements for the Lippert Ground Control systems we have the part # LC362485 for just the leg portion or the part # LC305340 for a leg with the foot and motor as well. These will be the same length as what you have currently.
view full answer... - How To Choose the Correct Replacement Rear Jack for a Lippert Ground Control Leveling SystemI have attached for you a set of photos which are used to identify the landing gear legs on a trailer. I assume you have either the older Lippert Ground Control 2.0 Leveling System or the newer Lippert Ground Control 3.0 Leveling System. If that is the case then the easiest way to tell which is which is to note the shape of the rear jacks. If the jacks are square then you have the Lippert Ground Control 2.0 Leveling System therefore need the Replacement Heavy-Duty Landing Gear Jack Leg...
view full answer...
- Replacement Lead Leg For Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System Yes, we do have replacement parts available. If I am following you correctly, you are looking for the replacement lead leg for your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System, # LC675817. This will be part number, # LC305340.
view full answer... - Lippert Ground Control 3.0 Out Of Stroke Error The "out of stroke" message on your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System, # LC358590 means the jack has reached maximum stroke length and can't extend any further to level the trailer. You need to block the legs, I prefer the Ultra-Fab Leveling Blocks for Trailers and RVs, # UF48-979051. If you continue to get an "out of stroke" error or you cannot manually retract the jack then that would point to signs of damaged internals which means the jack leg would need...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Kathleen M
Installed by:
Michael B
Updated by:
Shelly K
Updated by:
Mike S
Written by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
8/29/2023
Yikes! I will have our Customer Service team reach out to you so that we can take care of this quickly.