Replacement 24-1/2" Left Rear Leg - Lippert Ground Control 3.0 Electric Leveling System
(46 reviews)
Price: $612.70
In Stock
Replacement 24-1/2" Left Rear Leg - Lippert Ground Control 3.0 Electric Leveling System
Item # LC305339
Retail:$749.35
Our Price: $612.70
You Save: $136.65
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (46)
- Q & A (0)
- Videos (1)
- Photos
Lippert Accessories and Parts - LC305339
- Camper Jacks
- Trailer Jack
- Legs
- Follow Leg
- Lippert
Replaces 1 rear left leg for your Lippert Ground Control 3.0 automatic leveling system (LC358590 or LC675817). Leg includes the mounting bracket needed for installation. Snapper pin to attach footpad (LC225598) is sold separately.
Features:
- Replacement left rear leg for your Lippert Ground Control 3.0 electric leveling system (LC358590 or LC675817)
- Leg includes the mounting bracket needed for installation
- Snapper pin to attach footpad (LC225598) is sold separately
Specs:
- Total lift: 12-1/2"
- Overall height:
- Retracted: 24-1/2"
- Extended: 36-3/4"
- Capacity: 5,000 lbs
305339 Replacement Left Follow Leg for Lippert Components Ground Control 3.0 Electronic Leveling System - Qty 1
Video of Replacement 24-1/2" Left Rear Leg - Lippert Ground Control 3.0 Electric Leveling System
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Lippert Ground Control Replacement Leg Review
Today we're going to be taking a look at Lippert's replacement rear leg for the ground control three leveling system. These are available for either the left or the right for either your four point or six point leveling system. These jacks are going to be a direct replacement for your factory originals. So whether your jacks are worn out and no longer functioning from age, or if you had some sort of collision that's damaged them, these are a nice easy replacement. And you don't have to replace your entire system, just that particular damaged jack.The replacement jack only includes the jack, so you want to make sure that you save all of your mounting hardware to get your new one installed. On the six point replacement jack, the foot pad is made onto the jack.
However on the four point system replacement jack, the foot pad is removable, and the pin that holds it on does not come included. So you want to make sure that you maintained your pin from your original jack. If need be, you can purchase additional replacement pins here at etrailer.com.With these replacement jacks, you can have the comfort of knowing that they are factory original replacements, and they're going to bolt right up guaranteed. Our motor's burnt out on this one here, so we're going to need to replace it. We'll begin the replacement by disconnecting the electrical connectors.
So you're going to want to follow the leads from the motor, pull those down. You'll disconnect them by pressing on the release tab, and pulling them apart.Next you'll simply need to remove all the bolts that are holding it in place. On our particular unit here, we're going to be using a 19 millimeter socket and wrench to remove those. To get to the top ones, I recommend only removing them partially, leaving some of the nuts still threaded on to hold it in place because it is quite heavy.Now we've got them most of the way removed, you can support your jack and remove the rest of the hardware by hand. I like to just leave the bolts in there and just remove those with the jack.
We'll now set it down and get our replacement. An exact replacement for the factory originals, and it installs just in the reverse order of how we removed it. Now when you removed your old one, you want to remember which holes that you used because it does have a height adjustment with these holes. If you're questioning it, you can always take a peak at the other side because the other side is going to have the same distance as this side.With all of our bolts in place, we can tighten them back down using that 19 millimeter socket and wrench. Then torque it to the manufacturer's specifications.
Now we can plug in our electrical connectors. And you're all set, ready to go on your adventures again. And that completes our look at Lippert's replacement rear leg for the ground control three leveling system.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Did not fit
- Did not arrive in time
Customer Reviews
Replacement 24-1/2" Left Rear Leg - Lippert Ground Control 3.0 Electric Leveling System - LC305339
Average Customer Rating: 4.9 out of 5 stars (46 Customer Reviews)
Replaces 1 rear left leg for your Lippert Ground Control 3.0 automatic leveling system (LC358590 or LC675817). Leg includes the mounting bracket needed for installation. Snapper pin to attach footpad (LC225598) is sold separately.by: Rob 05/05/2024
OEM replacement part for my Lippert sys tem.
by: Elda11/23/2021
They work great! They fit perfectly and they both went on easy and fast as our replacements. We were able to auto level within a few min after installing.
by: Travis 07/25/2023
Everything was as expected except the manufacturer did not send the pin to attach the bottom plate. Other than that, it’s perfect. Good customer service and shipped when expected.
by: Frank 02/18/2023
The box arrived torn and the UPS driver said it happens all the time. Luckily the parts I need are OK.
I would like to have been reminded that the "snapper pin" is NOT included with this kit.
Otherwise this will correct our situation.
by: Daryl04/20/2020
I had to replace one of these on my camper after a small backing incident that bent the jack housing. I called etrailer and the folks there helped me identify the correct version of the jack and then got it shipped to me quickly. It was direct replacement, so the install was quick and easy. Now I have a spare motor!
by: Larry C09/30/2021
Bent the original leg on a concrete curb while traveling with our Jayco Pinnacle 5er to Ark. Etrailer promptly delivered the replacement to our favorite RV campground. Easy to put on. Worked right out of box. No error codes, so didn't even have to re-program the Lippert Level Controls. Used a dozen times this last year with no problems.
by: Tony Gutierrez07/04/2017
Sirs,
I wanted to let you know that I replaced the damaged leveling leg of my trailer with the one I received from you. It took a little work because I ordered the wrong side. After installing and connecting it, I tried performing an automatic leveling. And guess what, it worked perfectly. I did download the procedure to accomplish it.
Thank you very much for your quick delivery and correspondence.
Tony Gutierrez
by: Ronald 05/15/2023
Had to replace one. Order came in fast. Plugged it in and worked great
by: Gary09/23/2022
Fast shipping! A perfect replacement. Auto-leveling works again. I did have to use the hardware from the damaged jack, but it worked fine.
by: Murray09/29/2022
The product appears to be right and showed up very timely. It is missing the pin that holds the foot plate on but I will try to reuse the one off the old unit. I have yet to install it but am assuming at this point (since it is new) that it will work just fine.
by: Bret03/07/2018
Perfect fit and works as it should. Direct replacement for left rear jack for LCI on 2016 Montana high country leveling system 3.0
Thank you for the help
by: Autumn09/23/2020
Part arrived very fast, even with the pandemic going on! I have ordered from etrailer many times and have been extremely satisfied each time. This is a company you can trust for quality RV parts!
by: Brian 09/21/2021
This replacement jack was an easy install. My first. Plug and play, if you will. After homing the jacks and running a zero calibration, I was good to go.
by: Michael 08/07/2022
perfect replacement to my original jack.
by: Jeremy 03/09/2023
Fast shipping and works great!
by: Kaykeey10/21/2020
Fast shipping. Parts exactly what we needed. Order woman was extremely patient, helpful and efficient in assisting me in figuring out what parts I needed.
Thanks so much!
by: Helen 12/22/2022
Excellent service, quick free delivery. Can’t ask for more.
by: Jemar03/24/2022
Perfect fit. Plug and play. The best customer service I have ever received. Super fast shipping.
by: John06/21/2019
The product worked great out of the box, fast shipping. eTrailer is easy to work with.
by: Kayla 08/31/2020
big fan of etrailer they always ship faster than expected!
by: Ray 08/22/2022
Order came a couple of days before I thought. Part was well packed.Part was a perfect match. Installed and works great.
Excellent service
by: Fernando V09/23/2022
Pack a little better. Worked perfectly!
by: Ryan 11/16/2020
Excellent Phone Service!! Product delivered on time and correct one!! Could not be happier!!!
by: Marc07/23/2021
Great product, did the job, fit as expe cted!
by: Belinda 08/08/2021
It came quickly and works great.
25
46
Show More Reviews
See what our Experts say about this Lippert Accessories and Parts
- Replacement Left and Right Middle Legs For Lippert Ground Control 3.0 On 2018 Keystone MontanaThe Replacement 24-1/2" Left Rear Leg # LC305339 and Right Rear Leg # LC344792 are the correct replacement middle jacks for the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC675817. These also act as the rear replacement legs of the 4 Point Kit # LC358590 which is why they are labeled the way that they are. Your Rear Legs # LC428493 and # LC342610 are 2" shorter than the middle legs.
view full answer... - Lippert Ground Control 3.0 Out Of Stroke Error The "out of stroke" message on your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System, # LC358590 means the jack has reached maximum stroke length and can't extend any further to level the trailer. You need to block the legs, I prefer the Ultra-Fab Leveling Blocks for Trailers and RVs, # UF48-979051. If you continue to get an "out of stroke" error or you cannot manually retract the jack then that would point to signs of damaged internals which means the jack leg would need...
view full answer... - Determining Which Replacement Rear Leg Is Needed for Lippert Ground Control SystemThe direction labels on the replacement jacks for your Lippert 4-Point Ground Control 3.0 System # LC358590 are determined when facing the rear of the trailer (in the direction of travel). For the right (passenger's side) rear replacement leg you will use part # LC344792 and for the left (driver's side) rear leg you will use part # LC305339. I have attached a short video demonstration that you can check out as well.
view full answer... - How To Choose the Correct Replacement Rear Jack for a Lippert Ground Control Leveling SystemI have attached for you a set of photos which are used to identify the landing gear legs on a trailer. I assume you have either the older Lippert Ground Control 2.0 Leveling System or the newer Lippert Ground Control 3.0 Leveling System. If that is the case then the easiest way to tell which is which is to note the shape of the rear jacks. If the jacks are square then you have the Lippert Ground Control 2.0 Leveling System therefore need the Replacement Heavy-Duty Landing Gear Jack Leg...
view full answer...
- Troubleshooting An LR Error Code On A Lippert Ground Control 3.0 Leveling System An LR error code would indicate an electrical error with the left rear jack. You'll want to start by checking the fuses on your controller to ensure that it hasn't blown. You can use a circuit tester # PTW2993 and touch it to both contacts on the top of the fuse to check for power. From there you would need to trace the wires back to the jack to see if there's any damage, loose connections, or corrosion. If you find no damage then I would test the power at the jack using a multimeter...
view full answer...
- Replacement Landing Gear Legs for Lippert Ground Control 3.0It sounds like you have the Lippert Ground Control Auto Leveling Landing Gear 3.0 part # LC358590 and are looking for replacement front landing gear legs. For that you would want the part # LC305340 . The part number for the rear would be # LC344792 for the right and part # LC305339 for the left.
view full answer... - Replacement Jacks For Lippert Ground Control 3.0 Six Point RV Leveling SystemOn the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC675817 the following jacks are used. Front Landing Gear # LC305340 Left Middle Jack # LC305339 Right Middle Jack # LC344792 Left Rear Jack # LC342610 Right Rear Jack # LC428493
view full answer... - Can You Use a 6-Point Ground Control Jack on the 4-Point SystemI was honestly unsure on whether the jacks are interchangeable so I reached out to the manufacturer. For the most part you can use the Replacement 22-1/2" Left Rear Leg for Lippert Ground Control 3.0 Electric Leveling System # LC342610 (428493) in place of the Replacement 24-1/2" Left Rear Leg - Lippert Ground Control 3.0 Electric Leveling System # LC305339 (305339). I have included what the manufacturer told me below. "jack 305339 could be replaced with jack 428493. It would have to...
view full answer... - Replacement Left Rear Leg for Lippert 3.0 Ground Control Leveling SystemTo replace the left rear leg on your Lippert 3.0 Ground Control Leveling System # LC675817, you will just need the Replacement Left Rear Leg # LC305339. This leg will include the motor and mounting bracket needed for installation . The replacement leg is not available from the manufacturer without the motor so you will need to replace the entire leg assembly. The pricing information will be listed on the product page.
view full answer... - Wiring Diagram for Replacement Left Rear Leg for Lippert Ground Control 3.0Installation of the # LC305339 will only require plugging the leg wiring harness into the wiring harness attached to your controller. I have attached a wiring diagram for the 4-point and 6-point system below.
view full answer...
- Recommended Replacement Jack Legs for a Lippert Ground Control 3.0It would depend on what leveling system you have currently, however if you have the Lippert Ground Control 3.0 then you could use: -The Replacement Front Jack for Lippert Ground Control 3.0 Leveling System # LC362485 for a front jack, -The Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System # LC305340 for a lead leg, -The Replacement 24-1/2" Left Rear Leg # LC305339 or # LC342610 for a left rear leg, and the Replacement 24-1/2" Right Rear Leg # LC344792...
view full answer... - Replacement Rear Jack/Leg Recommendation for Lippert Ground Control Leveling SystemIf you are looking for replacement rear jacks for use with the Lippert Ground Control leveling system you'd want the part # LC344792 for the right rear leg and part # LC305339 for the rear left leg.
view full answer... - Replacement Rear Leg and Bracket for Lippert Ground Control 3.0The correct replacement leg will depend on your retracted height as well as the side the leg is on. We have the following available: -Replacement 24-1/2" Right Rear Leg # LC344792 -Replacement 22-1/2" Right Rear Leg # LC428493 -Replacement 24-1/2" Left Rear Leg # LC305339 -Replacement 22-1/2" Left Rear Leg # LC342610 The correct replacement bracket is the Replacement I-Beam Jack Bracket for Lippert Ground Control 3.0 # LC349975. Based on the experience of other customers, it may require...
view full answer... - Replacement Leg for Lippert Ground Control 3.0 on Keystone Cougar Travel TrailerThanks so much for the photo, it was very helpful. Based on that the correct replacement leg for the Lippert Ground Control 3.0 Electric Leveling System # LC358590 on your Keystone Cougar is actually going to be the Replacement Left Rear Leg # LC305339, which as you can see with the side-by-side photo, is oriented the same as your damaged leg (the entire replacement leg with motor does need to be purcahsed, as there is not a separate leg portion without the motor available). The Replacement...
view full answer...
- Replacement Jack For A Lippert Hydraulic Leveling SystemIt sounds like you are needing to replace one of the rear legs for your Lippert Ground Control leveling system. The Rear legs have a mounting plate with 11 holes. So I believe we are on the same page here. There are going to be a few options for the leg, and we should be able to narrow it down pretty easily. We just need to know if it is a left or right hand side jack, and we need to confirm the retracted height. There are 22-1/2" legs and 24-1/2" legs. For a replacement leg we have the...
view full answer... - Replacement Rear Leg Recommendation for Lippert Ground Control Landing Gear JackWe have replacement rear legs for the Lippert Ground control system that it looks like you have. For the rear left leg you'd need the part # LC305339 and then for the rear right leg you'd want the # LC344792. As of right now (April 2018) July 2018 hasn't happened so I'm pretty sure you meant 2017. The Ground Control like part # LC358590 has a 1 year warranty.
view full answer... - Lippert LC358590 Ground Control 3.0 Out of Stroke ErrorThe 'Out of Stroke' error means that one or more jacks have been over-extended. If they will not retract using the touchpad, then you'll need to manually retract them using the manual override located under the black protective cap on top of each jack. To clear the error, extend all of the jacks in the system at least 6 inches. Then press and hold the retract button until the jacks start to retract. All of the jacks should fully retract and the error should be cleared. If you keep getting...
view full answer... - Replacement Motor For Rear Landing Gear Leg On 2011 Keystone Alpine 5th Wheel TrailerIt sounds like your 2011 Keystone Alpine 5th wheel trailer has a Lippert Ground Control System like # LC358590. The replacement motor for the rear leg is the Replacement Hall Effect Motor for Lippert Components Ground Control 3.0 Leveling System # LC343758. If you want to replace the motor and the leg, you will want the Replacement Right Rear Leg for Lippert Components Ground Control 3.0 Electric Leveling System- Qty 1 # LC344792 or the Left Rear Leg # LC305339.
view full answer... - Out of Stroke Error on Lippert Ground Control 3.0 Middle Jacks Not MovingYes, I do have an idea regarding the Out of Stroke issue you are seeing on the Lippert Ground Control 3.0 # LC675817. According to the instruction manual, the issue is likely a bent or damaged jack (or jacks), especially since you have already done the manual override. To replace the bent or damaged jacks you will need either the Replacement Right Jack # LC344792 or Replacement Left Jack # LC305339.
view full answer... - Replacement Short Legs for Lippert Ground Control 3.0There have been 2 different heights of smaller legs that come with the Lippert Ground Control 3.0 # LC675817 over the years so you'll need to measure and see if you have the 22-1/2" or the 24-1/2" rear legs in order to choose the correct replacement - this is the overall height in the retracted position. Once you know which height you need you'll just choose from the following: 22-1/2" Left - # LC342610 Right - # LC428493 24-1/2" Left - # LC305339 Right - # LC344792 Attached is a review...
view full answer... - Can Replacement Rear Legs for Lippert Ground Control be Used with Other BrandsThe Lippert legs that you mentioned, # LC305339 and # LC344792, are designed specifically for use with the Lippert 3.0 Ground Control system # LC358590. This system has unique electrical components that are not interchangeable with other brands so the legs alone will not work with your existing system. You would need to either replace the whole system with the Ground Control or use manual stabilizers at the back of your trailer. The highest capacity manual stabilizer jacks we have are...
view full answer... - Does the Lippert Replacement Left Rear Leg for Ground Control System Include Hardware The Replacement Left Rear Leg for Lippert Components Ground Control 3.0 Electric Leveling System, # LC305339, will include the bracket needed to mount to the frame of a trailer. The leg will replace the current leg on a Lipper Ground Control 3.0 System. The jack leg will include a new foot pad, but hardware and snapper pin for foot pad are not included.
view full answer... - Out of Stroke Error on Ground Control 3.0The "Out of Stroke" error on the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System - 4-Point Set # LC358590 and 6-Point Set # LC675817 means that they have reached the max height, can no longer lift so you need to relocate your trailer, or that you have bent or damaged jacks that will need to be replaced. So you'll need to check those jacks to see if there are any that are damaged, and replace as needed with one of the following: - Replacement Lead Leg for Lippert Components...
view full answer... - Replacement Rear Legs for Lippert Ground Control 3.0 System for Leaking MotorIt would be time to replace the leg assembly since the motors by themselves are not replaceable. So if you have the 4 point system and you need the right rear leg you'd want the part # LC344792 or for the left rear leg # LC305339. If you have the 6 point system you'd instead want the part # LC342610 for the left rear leg or part # LC428493 for right rear.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Chris R
Updated by:
Shelly K
Updated by:
Mike S
Written by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Elda
11/24/2022
Great and still easy to self level our trailer