1995 Mack Trucks MS Series Windshield Wiper Blades

I attached a picture that shows what the three different styles of wiper blades look like. Beam and Frame are the most different and Hybrid is mix of the two. The #MCH8519 is the hybrid style in the middle.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes, the Wiper Technologies Heavy Duty Windshield Wiper Blade - Beam Style - 36" - Qty 1, part #WPR66FR, will attach via a j-hook. It comes with an…

Thanks for the pictures. What you have there are the old Thule square bars. Since none of the current Thule feet are compatible with those crossbars you will need to use the Inno Feet for Square Crossbars #INSUT. The Inno bars are the same as the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Sam, thanks for reaching out! For replacement wiper blades you'll need 2 of the…

Your 2021 Ram 3500 uses 24" wiper blades. The #RX5079274-2 are only…

Yes, you will be able to use the Furrion Chill HE RV Air Conditioner System #FR87FJ to replace all your Coleman MACH components. The thermostat will be able to control your furnace and run off the thermostat wiring your Coleman AC uses.

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

As you have a Coleman Mach system currently you can use the Furrion Chill AC units from the list below. These will simply replace only the rooftop units and the controls and thermostats you currently have in place with control the new…

Hey Matt, for a value based brake controller that will fit the connector you have now and works really well you would want the Tekonsha Brake EVN part #TK63VR. This uses exact same connector as what the harness you have now uses so it will plug…