Trailer Wiring Harness Installation - 2010 Kia Soul Video

The three 1-1/4-inch hitches we offer for the 2010 Kia Soul are all Class I-rated and have a tongue weight capacity of 200-lbs. These light-duty hitches are ideal for use with accessory items like bike carriers or for light towing. The link provided…

I recommend using the Malone EcoLight Sport Trailer #MAL73FR to transport your NuCanoe Unlimited fishing kayak because it can handle up to 400 lbs and it one of the more cost-effective watercraft trailers we carry since it doesn't have any extra…

I can certainly help you with that. Since the Curt T-Connector Vehicle Wiring Harness, part #C55384 is a 4-way connector the four functions will be Yellow for the left turn and brake, Green is for right turn and brake, Brown is for running lights,…

Since you have 12' long kayaks, the use of a j-style carrier is not recommend as the max length of most j-style kayak carriers is 10' long. I spoke to my contact at Rhino-Rack and they informed me that the best way to carry two wide based…

The correct Draw Tite trailer hitch for a 2010 Kia Soul is the Draw Tite part #24839. We have confirmed that this is the correct hitch for your vehicle with Draw Tite. I attached an install video for this hitch for you to check out as well. I tried…

I spoke with my contact at Yakima and found that the tires on the Rack and Roll trailer, #Y08106, are DOT rated. Trailer tires are tested to 65 miles per hour to meet DOT standards, so we cannot recommend towing the Rack and Roll trailer faster than…

Assuming the lights and wiring on your older trailer are in good condition you will not have any issues connecting with and powering its standard incandescent lights with a tow vehicle that is equipped with LED lights. The difference in light…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…