Thule RideAlong Lite Child Bike Seat Review Video

The Thule RideAlong Lite Child Bike Seat #TH100110 uses the Thule One-Key Lock System. You can get the Replacement Lock Cylinder and Premium Key #1500004217 and a Universal Change Key #853-1251 to change out the cylinder on your seat. This will…

Basically the RideAlong Lite part #TH100110 is a slimmed down and more minimalist version of the Ridealong part #TH100107. It's about a pound lighter and just a little smaller in size which allows it to cost a little less.

Not at all! The only difference between Thule RideAlong #TH100107 and RideAlong Lite #TH100110 is that the normal version has the ability to recline some while the lite version is fixed. I recommend going with the normal version as that recline…

What you need is the Thule Low Seat Adapter part #TH100300 that you referenced. I spoke with my contact at Thule and sent them your picture and they confirmed this is the correct solution.

Since your GT Aggressor XC2 is a mountain bike with a standard frame you'll want to go with the Thule RideAlong Child Bike Seat #TH100107. This is designed for children ages 9 months to 6 years and has a max weight capacity of 48.5 lbs. The…

When using the Thule Ride Along, part #TH100107, it's recommended that the carrier sits at least 3 inches above the rear wheel. If its too close to the wheel, then the Ride Along Low Seat Adapter, part #TH100300 can help. On your bike in…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…