ComeUp Cub 4 UTV Winch - Wire Rope - Roller Fairlead - 4,000 lbs
(6 reviews)
Price: $355.95
ComeUp Cub 4 UTV Winch - Wire Rope - Roller Fairlead - 4,000 lbs
Item # CU123922
Retail:$430.00
Our Price: $355.95
You Save: $74.05
- All Info
- Reviews (6)
- Q & A (0)
- Videos (3)
- Photos
ComeUp Electric Winch - CU123922
- ATV - UTV Winch
- 2001 - 4000 lbs
- Wire Rope
- Plug-In Remote
- ComeUp
- Medium - 5 to 9 fpm
- 1.0 HP
- 11 - 20 lbs
- 3-Stage Planetary Gear
Standard-duty winch with 1-hp, permanent magnet motor lets you quickly and safely recover a stuck UTV. Sealed design ensures winch operates in any environment. Dual brakes offer reliable load holding. Handlebar rocker switch included.
Features:
- UTV recovery winch is designed for recreation and standard-duty work applications
- Perfect for 300cc - 850cc UTVs, ROVs, or MOHUVs
- Recommended for UTVs with a maximum GVW of 2,000 lbs
- 1-hp, Permanent magnet motor delivers fast and safe line pulling
- Motor is lighter and uses less current than a series-wound motor
- Sealed to keep water out and prevent internal corrosion
- Sealed and submersible 250-amp contactor transmits power from vehicle battery to winch motor
- Water- and weather-resistant to IP68 specifications
- Mounts on or near UTV's battery box with included hardware
- Automatic mechanical and dynamic brakes ensure reliable load holding
- Mechanical spring brake creates resistance on drum to stop rotation and hold the load
- Dynamic brake uses resistance from motor to stop drum rotation
- All-steel, 3-stage planetary gear train
- Provides increased drum speed when compared with worm drives and 1- or 2-stage planetary gear trains
- Hand-held rocker switch lets you control the winch from the seat of your UTV
- Wireless remote control (CU881286 - sold separately) available
- Free-spooling clutch ensures fast rope payout and reduces wear on the motor
- 1/4" Diameter wire rope is strong and abrasion resistant
- 50' Long galvanized steel cable
- 1/4" Forged steel clevis hook and nylon hand-saver strap included
- Heavy-duty, compact roller fairlead
- 4 Steel rollers reduce friction and wear on the rope
- Black anodized finish resists corrosion
- Mounting plate (sold separately) may be required to mount winch and fairlead to your UTV
- Durable, gray powder coated steel body and motor resist corrosion
- Tie-bars and side frames help to create a strong and rigid winch body
Specs:
- Rated line pull (with a single layer of wire rope around the drum): 4,000 lbs (static load)
- Maximum recommended UTV GVW: 2,000 lbs
- Motor: 12-volt DC
- Line pull at 0 lbs:
- Power draw: 15 amps
- Line speed: 19-1/2 FPM
- Line pull at 4,000 lbs:
- Power draw: 230 amps
- Line speed: 6-1/2 FPM
- Line pull at 0 lbs:
- Gear ratio: 191:1
- Duty cycle: S3 5% (approximately 44 seconds on/14 minutes off)
- Braking: 100-percent load-holding mechanical and dynamic
- Battery lead wire: 6 gauge
- Battery lead length: 6'
- Rope dimensions: 50' long x 1/4" (5.5 mm) diameter
- Winch dimensions: 14-1/2" long x 4-1/2" wide x 4-11/16" tall
- Drum dimensions: 2-3/16" diameter x 4-11/16" long
- Distance between roller fairlead mounting holes (center to center): 6-1/2"
- Winch weight (with wire rope installed): 19.6 lbs
- Recommended battery size (for maximum power): 550 CCA
- Warranty:
- Limited lifetime on mechanical components
- 1-Year on electrical components
This Cub 4 UTV recovery winch is designed for standard-duty work and recreational applications. It's perfect for your 300cc - 850cc UTV, ROV, or MOHUV with a maximum GVW of 2,000 lbs. The hand-held rocker switch lets you control the winch from the seat of your UTV. The motor, gearbox, and contactor are sealed for water resistance. The winch also includes dual brakes to ensure reliable load holding, a wire rope, and a roller fairlead.
Standard-Duty, 1-Horsepower Motor
This winch features a 1-horsepower, 12-volt DC motor with 4,000 lbs of line pull. The permanent magnet motor offers the same line-pulling power and speed as a series-wound motor of comparable size, but it's lighter and uses less current. The motor is sealed to keep out water, and it's constructed of durable, corrosion-resistant materials including the powder coated housing, copper battery terminals, and zinc-plated steel hardware.
Sealed Contactor
The contactor transmits power from the UTV's battery to the winch motor and to the hand-held rocker switch. It will typically be mounted in a convenient location near the UTV's battery box using the included hardware.
The 250-amp contactor is sealed to meet IP68 specifications for water and weather resistance. The copper terminals and carbon steel hardware are also corrosion resistant.
Free-Spooling Clutch
The free-spool clutch enables you to pull out the rope by hand. This saves battery power, prevents the brake from wearing down prematurely, reduces wear on the motor, and is much faster than waiting for the drum to power out the rope. To release the clutch for free-spooling simply rotate the red plastic knob 90 degrees clockwise. To reengage the clutch, rotate the knob 90 degrees counterclockwise. The white arrow on the knob indicates if the clutch is in the engaged or disengaged position.
The clutch is driven by a 3-stage planetary gear train. This provides more speed than traditional worm gear drives or 1- or 2-stage gear trains.
Automatic, Load-Holding Mechanical and Dynamic Brakes
This winch includes both a mechanical brake and a dynamic brake. This dual braking system provides a physical brake inside the drum and supplemental braking force generated by the winch motor. The 2 brakes operate simultaneously to ensure more reliable load holding when compared with single-brake UTV winches.
The automatic mechanical brake securely holds a load and prevents unintentional payout (or creep). When the winch motor is stopped, a large spring coil inside the drum expands to press against the spring chamber. The pressure of the spring on the wall of the spring chamber creates resistance that prevents the drum from rotating. This spring contracts when the winch is in gear to allow the drum to rotate.
When the winch is pulling the rope in or paying it out, the motor is not applying resistance to the drum. When you stop powering the rope in or out, the dynamic brake uses resistance from the motor to help hold the load.
Hand-Held Rocker Switch
The hand-held rocker switch lets you operate the winch from the seat of your UTV. It includes an 8' wiring harnesss with quick connects. There is also a wireless remote kit (CU881286 - sold separately) that lets you control the winch from up to 100' away.
Wire Rope
The wire rope is made of high-strength, aircraft-grade galvanized steel that resists abrasions and is able to withstand harsh UV rays, chemicals, and extreme temperatures.
The rope winds around a die-cast aluminum drum. The mounting flanges are strong enough to resist bending or breaking if the rope wrap becomes uneven and excess stress is put on the drum.
A hand-saver strap is included to use in conjunction with work gloves (CU881558 - sold separately) so that you can safely handle the rope and hook. A rock bag (CU881557 - sold separately) is also recommended for added protection. The rock bag helps prevent a broken rope from snapping back if it breaks by forcing it to the ground.
The removable steel hook is made of high-strength forged steel that is heavy duty and rust resistant. It has a spring-loaded safety latch for quick fastening and removal. The hook attaches to the steel thimble on the end of the wire rope.
Roller Fairlead
The roller fairlead has a thick steel frame with 4 steel rollers. The rollers reduce friction when you're pulling the rope in or paying it out, and they prevent the rope from becoming pinched when pulling at extreme angles. It has a black powder coat finish and zinc-plated rollers that are tough and corrosion resistant. The fairlead installs with the included steel hardware.
Note: The roller fairlead does not mount directly to the winch - it typically attaches to tabs on the UTV base plate (sold separately) or custom mounting plate (sold separately). ComeUp mounting plates and most aftermarket mounts include these tabs.
Rugged Construction
The winch is constructed of strong, durable materials that are able to withstand any weather condition or terrain. The contactor is sealed and submersible. The motor and gearbox units are made of corrosion-resistant powder coated steel, and they are sealed to keep water out. The steel tie-bars and extra-thick side frame drum supports help to create a strong and rigid winch body.
Installation
To install the winch on the front of your UTV you will need a suitable mounting location. In most cases you will need to bolt a custom mounting plate (sold separately) to the front framework of your UTV in order to mount the winch and fairlead. It also may be necessary to bolt the winch and fairlead to a base plate (CU880269 - sold separately) first, then bolt the base plate to the mounting plate.
The contactor can mount anywhere on the UTV but will typically mount on or near the UTV's battery box where it's easy to access. You will need to drill 2 small holes in the mounting surface to secure the unit with the included hardware. Black and red leads connect your vehicle's battery to the contactor, blue and yellow leads connect the contactor to the winch terminals, black and green leads connect the contactor to the rocker switch, and a red lead connects the rocker switch to the UTV master switch. The leads have quick connectors that make removing and re-installing the winch easy. Any excess wiring can be neatly tucked around the engine and secured with zip-ties (not included).
Winch Line Pull Capacity
| Layers of Rope | Capacity (lbs) | Total Rope on Drum (ft) |
|---|---|---|
| 1st Layer | 4,000 | 13-1/4 |
| 2nd Layer | 3,385 | 28-13/16 |
| 3rd Layer | 2,933 | 46-11/16 |
| 4th Layer | 2,588 | 50 |
The line pull capacity of your winch is determined by the maximum load your winch can pull with a single layer of rope on the drum. As more layers of rope are wound onto the drum, pulling the same load requires more force, leading to a loss in winching power. With a 2nd layer of rope around the drum, your line pull capacity is reduced by approximately 14 percent. With 3 layers on the drum, the line pull capacity is reduced by approximately 23 percent, and with 4 layers on the drum it is reduced by approximately 35 percent.
Note: It is recommended that you begin any line pull with a minimum of 5 wraps and a maximum of 2 layers of rope on the drum.
Double-Line Pulling
Increase the pulling capacity of your winch by doubling up the rope with a pulley block (CU881080 - sold separately). Secure the pulley block to a tree saver strap (CU881091 - sold separately) with a bow shackle (CU881092 - sold separately) to provide a strong anchor for your double-line pull. Using double-line operation will approximately double your winch's pulling capacity.
123922 ComeUp Cub 4 Powersports UTV Winch - Wire Rope - Roller Fairlead - 4,000 lbs
Video of ComeUp Cub 4 UTV Winch - Wire Rope - Roller Fairlead - 4,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for ComeUp Electric Winch - ATV - UTV Winch - CU123922 Review
Today we're going to be taking a look at Part #CU123922. This is the ComeUp Cub 4 Powersports UTV Winch. It's going to have the wire-rope design with a capacity of 4,000 pounds. The Cub Series Powersports Winch can help you get out of the mud, snow, ice, or whatever obstacle stands in your way. It is going to be designed for endurance and reliability. It's going to feature a high-efficient, low amp draw, sealed permanent magnet motor.
This, right, here, is going to be weather resistant, sealed contactor. This is going to handle high amps. It's going to allow a higher-duty cycle. What this does, once it's fully installed, is it simply disconnects your winch from the power source when the vehicle's not in use. It should be mounted close to the UTV battery. You're going to have all the wiring right here.
One of the other new features that I like about the winch is, everything's color-coded, so you got yellow, blue, red, and black wires. All of your posts are going to be color-coded. We're going to have yellow and blue posts on both the contactor and the winch. We're going to have red and black posts on the contactor. The red and black wires are going to run from the contactor to the UTV battery.
The blue and yellow wires are going to run from the contactor to the winch. The other thing it comes with is, it comes with a handlebar rocker switch. That's going to be this right here. It's going to let you control the in-and-out functions of the winch from the seat of the UTV. That's a nice feature to have. All the wiring and the plug is included.
It's going to come with all the necessary hardware to get the rocker switch mounted. The wiring on the unit is going to be six-gauge wiring. Again, it's all going to be color-coded. It's going to feature a 4,000 pound rating on a single line pull here on the winch. The motor that it uses is going to be an 800 watt, one horsepower, 12-volt permanent magnet motor. It's going to feature a gear ratio of 191 to 1, using a 3-stage planetary gear system. On this side, we're going to have a easy-to-use clutch. That's going to allow us to switch it from an engaged position to a disengaged position. "Engaged" simply means that we can use the switch to bring the line in, or bring the load in. When it's disengaged, it allows for fast wire rope payout because it allows the winch to go into a free spool mode. This, right here's, going to be our roller fairlead. The wire rope is going to run through the fairlead. The other thing I want to point out is that the wire rope has a nice thick rubber stop to it. You don't ever have to worry about the rope coming back through the fairlead. It's going to come through the fairlead. All of these rollers are going to roll really nice and smooth. That's going to reduce friction on the wire rope which is going to extend the life of the wire rope. The fairlead and the mounting hardware for the fairlead are included. The fairlead's designed to mount to a mounting bracket. Your mounting bracket is not included because it really depends, as far as mounting goes, what style of ATV or UTV that you're mounting this to. They make custom brackets for different applications. That's why they don't include a bracket with the winch itself. The fairlead is included, along with the hardware. Again, that mounts to the mounting bracket and not to the winch. When it comes to the braking system, we're looking at a mechanical and dynamic load-holding brake. It's going to offer 100% braking. When it comes to the construction of the winch, we're going to have aluminum dye cast drum and housings. It's going to feature a center drum design. It's going to offer strength and durability. It's also going to come with your Grade 70 forged steel hook. It has a safety latch on there. It had the pin and clip to attach it to the end of the wire rope right here. It's going to come with your hand-saver strap. When it comes to the drum size, we're looking at 2.2 inches by 4.7 inches. The cable is going to give us 50 feet in length. It's going to have a diameter of 7/32 of an inch. That's going to be an 87 by 19 galvanized aircraft cable. Taking a look here at the underside, we can see the mounting options, or the mounting holes. Two holes right here. Two holes right here. Mounting hardware is included to get it mounted. Taking the measurement going this direction, center-on-center, between the holes, you're looking at about 6 5/8 of an inch. Center-on-center going up and down, it's going to be right on 3 inches. That's going to be the same for both sides. The winch, itself, with the rope installed, is going to weigh about 19.6 pounds. When I took a measurement of the overall length, I got about 14 1/2 inches. Overall width, edge-to-edge, is about 4 1/2 inches. Overall height was about 4 3/4 of an inch. I want to give you just a few more ratings. With a single line on the winch, again, it's going to have a capacity, or pull capacity, of 4,000 pounds. The line speed at max load at 4,000 is going to be 6.6 feet per minute with a 230 amp draw at 12 volts. With no load on the winch, it's going to have a line speed of 19.7 feet per minute. That's going to draw 15 amps at 12 volts. Again, you can see everything that it comes with. It's going to come with some zip ties that we can secure any excess wiring that you have, tuck it up, and out of the way. You got your contactor, your wiring, your winch, the roller fairlead, your hook with the hand-saver strap, the handlebar rocker switch, which is just a remote, basically, to control the in-and-out function of the winch. You're going to get the mounting hardware for the rocker switch, and you're going to get the rubber boots. Those are going to go over the connection points like the terminals here on the wires and the posts that they connect to. That's going to protect it from the weather, from the elements, which is going to reduce the amount of rust and corrosion that we could experience if we didn't have those protectors on it. That's going to do it for our look at Part #CU123922. This is the ComeUp Cub 4 Powersports UTV Winch with the wire rope design.
Customer Reviews
ComeUp Cub 4 UTV Winch - Wire Rope - Roller Fairlead - 4,000 lbs - CU123922
Average Customer Rating: 4.8 out of 5 stars (6 Customer Reviews)
Standard-duty winch with 1-hp, permanent magnet motor lets you quickly and safely recover a stuck UTV. Sealed design ensures winch operates in any environment. Dual brakes offer reliable load holding. Handlebar rocker switch included.by: Mark 11/09/2021
I’ve had this winch on an 03 Polaris sportsman 700 for a year, and so far I’ve been very pleased with it. Bought it to use with a snowplow and it worked like a champ all through last winter. Has also worked on anything I’ve needed to use it for, i.e. pulling logs, pulling out the stuck garden tractor, etc. no complaints so far, works every time.
by: Don01/10/2019
This was the product that most closely matched the high end original winch on my Polaris ATV. The same design, dimensions and bolt pattern allowed an easy swap out. Primary use will be operation as snowplow lift. The ease of swap out slowed as I used my original mounting plate assembly that may have been thicker than a replacement. I required mounting bolts 1/4 longer than the supplied hardware.
I would recommend this as an affordable replacement winch, completed plowing and pleased with my choice.
by: Bobby (etrailer employee)08/05/2018
Still going strong, have used more times than I want to admit. It has saved us over and over. Love the synthetic rope over the wire version I had prior to this.
by: Larry08/03/2019
Exactly what I was looking for. The 1 bad thing is battery cable is too short but I can extend.
by: David 06/28/2021
by: John 11/17/2022
6
6
See what our Experts say about this ComeUp Electric Winch
- What Size Rope Is ComeUp Snatch Block CU881080 Designed ForThe ComeUp Snatch Block part # CU881080 is designed to work with 1/4" diameter wire rope. It is designed for use with ComeUp DV-4500i Trailer Winch part # CU644512, ComeUp Cub 4s Winch part # CU129412 and ComeUp Cub 4 UTV Winch part # CU123922. It is also designed for use with the ComeUp winches DV-2500i and DV-3500i which are no longer available.
view full answer...
Info for this part was:
Edited by:
Tyler C
Installed by:
Cole B
Installed by:
Robert C
Video Edited:
Chris R
Updated by:
Matthew S
Written by:
Ronnie R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.