Hollywood Racks Dual Size Hitch Tightener Review Video

The Lets Go Aero Flat Pipe Spine w/ 2" Shank for TwinTube Platform Cargo Carriers #H01373 has twin tubes that are 25 inches long. The overall length of the part is 40 inches when you measure from shank to the end of the tubes. I've attached…

No, you don't have to use the sleeve when you install the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches #63232. The main point of that sleeve is to keep the spring in good shape in the packaging and to my understanding you won't…

We do not sell just the internal block of the anti-rattle device part #63232 that you referenced so your best option would be to get a second one of these for use with your trailer ball that way you wouldn't have to mess with setting up the…

Since hitch locks like the #63232 don't end up carrying the full weight of a trailer they don't normally have towing capacities so it will work well for you. As long as you are using this hitch lock in the correct size hitch it's going to…

Our most popular anti-rattle device we offer is the Lets Go Aero hitch lock part #63232 that fits a 2 inch hitch like what you have. This would work well with the hitch of your 2018 Toyota 4Runner. I attached a review video for this for you to check…

For your 1998 Toyota 4Runner, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13087 is a confirmed fit that will not require any drilling. To use this hitch to tow a small trailer, I recommend the Tekonsha T-One Vehicle Wiring…

The usable length of the anti-rattle hitch lock part #63232 that you referenced is 2-5/8 inches which would be the correct length to fit the 2 inch hitch you have.

Based on similar vehicles we've tested the tilt feature of the Inno bike rack part #INH120 on it would allow the rear hatch of your 2023 Acura RDX to open the rear hatch with the rack tilted back. It would definitely be stable enough for a long…

Curt requires the use of their stabilizer strap part #18050 when using their hitch to carry a non-supported load like a bike rack. I attached a review video for you to check for the strap as well. You will need to use this strap to prevent the flex…

We have many bike racks that will work with a Curt trailer hitch, like part #C11085, on your 2010 Honda Accord LX, however, the Hollywood Racks Road Runner 3 Bike Rack, #HR310, will not fit. The fit issue is not with the bumper of your vehicle, but…

Normally we recommend that the Curt Stabilizer Strap #18050 get hooked to the top of the trunk lid or top of the hatch, since your vehicle has a small spoiler this can be prove to be a difficult situation. If the spoiler has metal support underneath…

It looks like on your 2011 Kia Soul, you will have to place the Curt Support Strap, #18050, in the gap between the body of the vehicle and the top of the rear hatch. You may have to open the rear hatch to get the hook in place and then close the…