etrailer Rolled Lip Trailer Coupler Lock Review Video

The torque for the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is not specified by the manufacturer. For 9/16 inch studs, the typical lug nut torque will be 120-140 ft lbs based on…

You would choose a side wind or top wind jack based on several factors. Each has its advantages. If clearance is an issue for the radius of a top wind, then you would choose a side wind. The opposite is also true. It is my experience that a side…

The difference between top wind and sidewind is really mainly about personal preference and somewhat about clearance. Basically which way to you want to crank the jack? Horizontally or vertically? Based on your picture you'd easily be able to…

Yes, the 20K weight rating of the Blue Ox Adjustable Ball Mount with Pintle Hook #BLU25XR is the same whether you're using it as a standard hitch ball or in the pintle hook application. This is a nice, solid piece of towing gear that I…

The trailer wiring harness you referenced, Hopkins #HM48895, is intended for vehicles that use LED taillights which draw relatively little power as compared to standard incandescent lights. I do not believe that your 1995 Ford Explorer came equipped…

Although it is not sold as a set like the #e68ZR, we do have these locks available with a keyed alike option. You will need the etrailer Adjustable Trailer Coupler Latch Lock #e98883 and the etrailer Hitch Receiver Lock for 2" and 2-1/2"…

To connect your vehicle that has a 4-Way flat connector to your trailer that has a 7-Way connector, you will need to install a 7-Way on the rear of your vehicle. If you just want or need the tail light functions to operate on your trailer you will…

With the quick link #C82932 closed the inside measures 3-5/16 inches by 3/4 inches at the nut or 7/8 inches away from the nut. This is shown in the video I have linked for you. I also made a picture showing the measurements.

The capacity of 16.5k lbs that the Curt Safety Chain Quick Link part #C82932 that you referenced has, is the capacity relative to its use as safety chain component. Basically, it would be expected to break when 16,500 pounds of force was put on it,…

The etrailer.com Coupler Lock #e98893 fits standard lipped couplers for 1-7/8-inch and 2-inch hitch balls up to a maximum width (including the lip) of 3-3/4-inches. Instead you can use our Coupler Lock #e98895 for 2-inch and 2-5/16-inch balls since…

Your 2021 Rockwood should be pre-wired to work with a Go Power solar panel setup, so it should already have a controller. This means that you should only need solar panels and the connectors to hook them up to the pre-existing wiring socket on your…

The Go Power Overlander Expansion Kit - 190 Watt Solar Panel #34282182 connects to a Go Power solar system via MC4 connectors. The kit comes with those connectors but if you need to add extensions you can do so with whatever length you might need: -…