Draw-Tite Max-Frame Trailer Hitch Installation - 2019 Nissan Pathfinder Video

When we installed the Draw Tite hitch part #76031 on a 2016 Nissan Pathfinder like yours we found that from the top of the hitch opening down to the ground measured 14 inches. So from the bottom of the hitch it would be more like 11-3/4 inches.

Yep, the 7- and 4-Pole Trailer Connector Socket #HM40975 does fit and will plug right into your 2019 Nissan Pathfinder.

Yes, the hands free liftgate feature on your 2018 Nissan Pathfinder will still be functional with the Draw-Tite Max-Frame Trailer Hitch Receiver part #76031 installed. However, in order to activate this feature you will need to place your foot on…

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

The trailer brake controller plug on your 2017 Nissan Pathfinder SL will be located underneath and left of the steering column, taped to another harness near the emergency brake pedal. This location is also revealed in the attached install video. If…

Yes, the license plate bracket of the Thule Arcos Enclosed Cargo Carrier #TH25YE does have a light on it to illuminate the license plate.

On a 5-Way trailer connector, usually found on boat trailers, the pin on the end furthest from the ground pin is used on an electric reverse lockout on the trailer coupler. This is so when you put the vehicle in reverse, it will single a solenoid on…

This will depend on the hitch used and the height of the trailer coupler. You want the trailer to be as level as possible. We have a page on calculating hitch height and coupler height to help you find what ball mount would work best. Most light duty…

Most ball mounts, like the Draw-Tite #2753 can be used in both a rise (upside down) and drop (standard) position. I'm not seeing any Curt ball mount with a part number 45836, but as I mentioned, most ball mounts are designed to be used either…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes, there is fascia trimming required to install the etrailer item #e98908 hitch on your 2019 Nissan Pathfinder. I have linked a video of the installation being done on a 2018 Pathfinder we had in the shop over the summer. If you skip ahead to the…

If you want to install the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13182 on your 2016 Jeep Grand Cherokee, you will use M14 bolts that are grade 5 as well as compatible flat washers. That is the replacement for what is…