Demco Kwik-Tow Tow Bars to Demco Tabless Base Plate Adapter Review Video

The 3/8" bolts in the Blue Ox Base Plate Kit #BX1689 will need to be torqued to either 33-lbs/ft (Grade 5 Bolts) or 47-lbs/ft (Grade 8 Bolts). A Grade 5 bolt with have 3 radial lines on the head of the bolt, where a Grade 8 bolt will have…

If the base plate Item #RM-521453-4 did not come with thread locker then we recommend using red loctite Item #LT37420. The instructions will tell you what thread locker to use. I have found the if it is not in the kit it will be red. As far as the…

The adapter you mentioned #BX88358 will work for you as we have checked with Blue Ox and this can fit tab widths of 3/4 inch wide, 7/8 inch wide, and 1 inch wide with 1 inch diameter pin holes. The distance between the arms is 1 inch.

You want the tow bar to be as level as possible to tow the vehicle safely. To find out what high-low adapters you need to flat tow you can take a couple measurements.You can park the towed vehicle on level ground and then measure from the ground to…

To remove the base plate arms for the Roadmaster EZ Base Plate Kit, #RM-52289-4, first you just pull the spring loaded pin located on the base plate arms. While pin is pulled, rotate the arm 90-degrees until the arm will slide out of the base plate…

We do have a base plate fit for your 2001 GMC Sierra 2500 HD 4x4 but the Roadmaster Base Plate Kit part #3101-1 is not a fit. In order to get the correct fit the 2001 GMC Sierra you have to measure from the lower-most threaded hole on the side of the…

Yes, you can use Valley Tow Bars with a Blue Ox Base Plate like the Blue Ox Base Plate Kit #BX1647. You will need a Blue Ox Base Plates Adapter #BX8833 in order to adapt your Valley tow bar to the #BX1647. I attached an FAQ article on flat towing…

Looks like you are missing the removable arms of a Roadmaster base plate kit on your 2000 Honda CR-V. To order the replacements you'll need the part #RM-ARMS.

The Blue Ox Bolt-On Base Plate Bracket Kit - 5,000 lbs Item #BX88230 is compatible to be used with any vehicle as long as where it will be mounted is structurally sound enough to tow the vehicle. For instance some off road steel bumpers with D-ring…

The Demco Classic Base Plate Kit #DM9518193 referenced in your question is confirmed to fit your 2006 Hummer H3. I spoke with contact at Demco and he stated that this base plate kit is directly compatible with your Blue Ox Avail Tow Bar #BX7420…

I would be happy to help! To flat tow your 2007 Hummer H3 behind your motorhome you will first need a base plate kit of which I recommend the Demco Classic Base Plate Kit - Fixed Arms #DM9518193 which will pair perfectly with the Demco Commander II…

Tow bars are meant to attach to base plates which mount to the frame of the vehicle. They are not meant to attach directly in place or or to the tow hooks or tow hook mounts on a vehicle. Your 2008 Hummer H3 may be constructed to be pulled from those…