Trailer Wiring Harness Installation - 2011 Subaru Outback Wagon 118467 Video

Exhaust rattle is fairly common problem with hitch installs that can easily be fixed. Since exhaust systems are designed for slight movements they don't always sit in the same spot on every vehicle, so when a hitch is designed for a vehicle…

There are really two main types of trailer hitches for a 2019 Subaru Outback, visible like the etrailer Trailer Hitch Receiver part #e98847 and hidden like the etrailer Trailer Hitch Receiver part #e42TR. The visible hitch means you can see the…

The best hitch for your 2018 Subaru Outback is going to be the etrailer Hitch item #e42TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. It has a 400 lbs maximum…

You are safe to tow up to the full rated capacity of your 2010 Subaru Outback 2.5L. The online owners manual states a maximum loaded trailer weight of 2,700 lbs with a maximum tongue weight of 200 lbs. The manual states this is 8% of the maximum…

I took a look at the online owner's manual for your 2012 Subaru Outback and found that as long as you have the 3.6L engine, the vehicle is capable of towing a 3,000 pound trailer if it is equipped with brakes. For a trailer without brakes, the…

When it comes to which hitch is best for your 2016 Subaru Outback Wagon The Curt Trailer Hitch Receiver Custom Fit - Class III - 2 inch #C13410 work work out best. All three hitches for your vehicle are all hidden underneath your vehicle, so it looks…

For your 2023 Subaru Outback Wagon, you can use the etrailer Trailer Hitch Receiver #e25TR. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver. It also has a nice matte black finish.…

Yes #e25TR does fit all models of the 2020 Subaru Legacy including your XT model so this mostly concealed hitch would work great for you.

Yes, the etrailer Trailer Hitch Receiver #e25TR is the correct fit for your 2023 Subaru Outback Wagon. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver. The 2" receiver is the…

Yes, there is a small section completely underneath your Outback, which is completely unnoticeable unless your lying underneath the car, that needs to be trimmed. I attached a photo below from the linked installation instructions that will show you…

The Curt Class III trailer hitch #C13119 does have a 350-lb tongue weight (TW) rating as you noted, and that capacity must be enough for the weight of the bike rack itself plus that of your loaded bikes. A substantial 4-bike rack like the Hollywood…

Ideally a hitched trailer will be level to the ground. We often recommend starting off with the hitch ball being a bit higher - an inch or so - than the top of the coupler on the level trailer since once hitched there will be a degree of squat in the…