Trailer Wiring Harness Installation - 2007 Jeep Commander Video

The Draw Tite hitch part #DT38MR is a confirmed fit for your 2014 Dodge Durango and would work great with just the ball mount portion of the #C45029 but since you'd already have a hitch you wouldn't need this full kit and could…

The existing turn signal/brake lamp circuits are already converted, so you shouldn't need an additional converter. I'd recommend checking the fuse box under the dash and in the engine compartment, and locating the right and left…

The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118408 which fits your 2006 Jeep Commander will give you a 4-flat harness. A 4-way is a standard harness on trailers without brakes and it simply plugs into your Jeep's…

What you found is a DOT number and not a speed rating. I was able to figure out which tire you have and it's a Loadstar 4.80-12 that has a 65 mph speed rating. In this size we have a tire that can go 81 mph as part #TT48012C.

The Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B #AM30590 have a max speed of 65 mph. When trailer tires are not speed rated with a letter, the default is 65 mph max. I've attached an article to…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…