Curt Class III Trailer Hitch Installation - 2021 Volkswagen Atlas Video

It looks like the Curt Trailer Hitch Receiver #C13366 is for the 2018-2020 Volkswagen Atlas but then the Curt Trailer Hitch Receiver #C24ER took over starting with the 2021 model. They look very similar but the dimensions won't be the same…

I would be happy to help set your 2022 Volkswagen Atlas for towing. I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" item #C24ER. It has a very clean installed look and a pretty easy install. I have attached a…

It sounds like you are trying to add a 7-way trailer connector to a 2021 Volkswagen Atlas and if that's the case we have some great options. That said, you'll have to start with a 4-way, the T-One Vehicle Wiring Harness part #118754…

For your 2021 Volkswagen Atlas you'd have to wire the Redarc Tow Pro #RED44FR to the VW harness you mentioned as the aftermarket just doesn't have an option at this time.

You are right about the fact that there are different trailer hitch receiver fits for the Cross Sport model of your 2021 Volkswagen Atlas so it was definitely a good idea just to make sure you get the correct fit. I went ahead and double-checked…

The hitch that I recommend for your 2021 Volkswagen Atlas is the Curt Trailer Hitch Receiver #C24ER. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver which is the most common…

The Curt Class III Receiver Hitch part #C13366 and Draw-Tite Class III Max Frame Receiver Hitch part #76176 are both excellent options for a 2019 Volkswagen Atlas. I recommend the Curt option because the bracing for the receiver tube is a bit less…

We do indeed offer a hitch for the 2020 VW Atlas Cross Sport. I'd recommend the Curt Class III hitch, part #C93CR. For a trailer wiring harness, use the #C56383. For a ball mount, I'd recommend the #C45030 and the #PC3 hitch pin. For…

The Curt hitch part #C24ER and the Draw Tite part #76176 that fit your 2021 Volkswagen Atlas are both very similar in design and have the same capacities but I would recommend the Curt #C24ER as we typically have the best luck with their hitches in…

The difference between the Curt #C24ER and the Draw-Tite #36635 is pretty severe. The Curt is rated up to 6,000 pounds towing with a 900 pound tongue weight, whereas the Draw-Tite is rated up to 3,500 pounds towing with a 350 pound tongue weight…

For your 2021 Volkswagen Atlas we have the Draw Tite hitch part #76176 that is rated for weight distribution but the Curt you mentioned is not rated for it so it can not be used with it. With this hitch you could use a system like the Reese Strait…

I recommend going with the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #76176. With a 900 pound max tongue weight it will be able to handle any accessory you want and if you need to haul a trailer at some point…