EcoHitch Hidden Trailer Hitch Installation - 2017 Chevrolet Bolt EV Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes, the Curt trailer hitch #C38DR is a confirmed fit for the 2023 Chevy Bolt EUV.

You can get a replacement mounting hardware kit for your Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13135 with part #RHK; on the product page you'll put the part number of your hitch (C13135) in the field marked "Hitch…

There is a pretty significant difference when it comes to the hitches you mentioned that fit your 2018 Chevy Bolt EV, the Draw-Tite Trailer Hitch Receiver #24956 and EcoHitch Hidden Trailer Hitch Receiver #306-X7359. As you mentioned, the Draw-Tite…

Thanks for passing that on! I am posting this on our site with your pictures to other owners of the 2022 Chevy Bolt EV that the Draw Tite hitch part #24956 does fit!

The EcoHitch part #306-X7359 weighs a total of 32 lbs.

If you are not comfortable installing the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" #306-X7359 on your 2017 Chevrolet Bolt EV then I recommend taking it to a local automotive repair shop as this is something they will be able to…

In researching the installation instructions for the Crut Class I Trailer Hitch, #C11457, you will need to trim a 4-1/2 inch long and a 2-1/4 inch wide slot on the under side of your 2017 Chevrolet Bolt EV's bumper fascia. The exact instructions…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

I was able to track down the installation instructions for the EcoHitch Hidden Trailer Hitch Receiver #306-X7317 referenced in your question and have attached the images from the manual below. I have also sent you a separate email with the PDF file…

The wiring harnesses are basically the similar harness from different manufacturers. I personally recommend the 4 Pole Trailer Connector (Includes Install Kit) #C59496 because it comes with the circuit tester to help you find the wire functions prior…

Is there a model name on the box anywhere? If the box has the SKS system, you would be able to use a control key, part #Y8007835 to remove the lock cylinder if it's currently unlocked. Insert the key and apply a little side pressure. If you could…