Trailer Hitch Installation - 2011 Toyota Highlander - Draw-Tite Video

Yes, the Tow Ready Wiring Harness part #118449 that you referenced has been confirmed as a fit for your 2010 Toyota Highlander so I would recommend it for you. I attached an install video for you to check out as well.

Glad to hear that you were able to easily install the Curt Trailer Hitch Receiver #13534. I will be happy to help you troubleshoot the Curt T-Connector #56042 for your 2011 Toyota Highlander. Since you do have the factory tow package on your…

We have everything that you need to set up your 2011 Toyota Highlander for towing. First, if you don't already have a trailer hitch, I recommend installing the Draw-Tite Max Frame Class III Trailer Hitch #75726 because it has more than enough…

When the Draw-Tite Class III receiver is installed on the 2011 Highlander, there will be no need to trim the fascia under the rear bumper. The top of the receiver tube will sit just below the bottom edge of the fascia. Some Highlander models are…

For your 2008 Toyota Highlander the Draw Tite Hitch part #75726 that you referenced is a confirmed fit. It does not include wiring so for that you would also need the #118449. I attached install videos for both of these products for you to check out…

You will need the Curt Class III Round Tube Trailer Hitch, item #13534, and with the tow package you will need the T-One Connector Wiring Harness with 4 Pole Trailer Connector - Toyota Highlander, item #118449. I would go ahead and install the 7-Way…

That is quite the price for a brake controller installation. I would think a local mechanic could get the job done at a lower price. To install a brake controller in your 2011 Hybrid Toyota Highlander, you will want a wiring harness and our universal…

The etrailer.com hitch part #e98858 is a confirmed fit that allows you to keep your full sized 19" spare. The Toyota Highlanders that we have had here for hitch installation, including several model years from 2009 on up, have all had full-size…

Draw-Tite trailer hitch #75726 will allow you to keep the full size spare under the vehicle. the only issue is that when raising and lowering the spare you will need to angle it in since it will not be able to go straight down or up. I have linked a…

The Dual Hitch Receivers such as part #RM-077-2 cannot be used for towing a trailer. These receivers are meant for use with a towbar carrying a rolling load and an accessory such as a bike rack or cargo carrier. We offer a Curt Ball Mount with 2 inch…

It sounds like maybe your Curt #C15572 may have been slightly bent during shipping. If yours isn't lining up I can almost guarantee that is what happened. Some people will use open steps for leverage, vices and even car jacks to apply controlled…

If your 2012 Toyota Highlander came with the factory towing package then it should already have a trailer connector. But if there isn't one you can use either a hardwire harness such as #C59236 or the plug in style #118449. The plug in style is…