Trailer Hitch Installation - 2011 Nissan Sentra Video

It sounds like the ball mount you have might be a Class II ball mount. The 1-1/4 inch size receivers come in two classes, Class I which is rated for 2,000 lbs. towing and 200 lb. tongue weight and Class II which is rated for 3,500 lbs. towing and 350…

I have attached a link to the installation instructions for the Curt Class I Trailer Hitch, #C11370 and links to trailer hitch installation tips that will help, but we have not had a chance to install this hitch on a Nissan Sentra yet because we rely…

Unfortunately we do not have a video of the installation for the Curt #C11370 yet, but I have attached the instructions in case you haven't seen those; it should help clarify things. You will need to remove the spare from the trunk for…

Other than the fact that they install a bit differently, and the Curt model isn't compatible with the SE-R model, both hitches are similar with the same 2000 lb towing/200 lb tongue weight capacity. If you'll be using the hitch as an…

Draw-Tite Class I hitch #24794 is a confirmed fit on your 2012 Nissan Sentra SE-R and when installing it I recommend using either a corded AC powered drill or at least an 18V cordless drill. You'll need a 1/2-inch drill bit. The reinforcement…

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…