SumoSprings Solo Front Helper Springs Installation - 2017 Ford E-Series Cutaway SSF-106-40 Video

For driving and handling upgrades to a 2021 E350 Class-C, RV, I would recommend the following. Roadmaster #RM-RBK24-RSSC, Reflex Steering Stabilizer w/ mounting brackets. Compensates for over steering and returns your vehicle to center. Roadmaster…

This is a great question and one that can cause some confusion. SumoSprings capacity is determined by how much weight it takes to compress the spring down to 50% of its original body height, so a spring like the #SSF-106-40 will compress down to half…

If you already trimmed the excess cable off when installing the Brake Buddy Stealth Supplemental Braking System - Proportional Item #HM39530 you might not have enough to add more slack to the line. Around the 8 minute mark of the attached video David…

With SumoSprings #SSF-106-40 installed on your 2017 Thor motorhome built on the Ford E-350 van chassis the springs will be engaged all the time. This means that the vehicle won't have the natural sag that it would with the stock bump stops and…

For a front sway bar for the 2017 Ford E-450 you'll want to use the Roadmaster #RM-1139-176. This part will replace the existing sway bar, but will reuse the factory hardware and end links. A rear sway bar is also available as part #RM-1139-147.

For a great choice for front-axle SumoSprings on your 2021 Thor Axis motorhome on a Ford E-450 chassis, I recommend the SumoSprings Solo Custom Helper Springs #SSF-106-47. Apart from the 1,000 load weight rating, these springs do not require any…

The SumoSprings I recommend for your 2004 E-450 Cutaway is part #SSF-106-40. These springs are progressive load springs which means they will stiffen as more weight is added to the front of your E-450. The springs work independently for offset loads…

The SumoSprings Solo Custom Helper Springs like part #SSR-209-40 can be in contact with the jounce spring contact point without a load present. Depending on which kit you have, there is sometimes a spacer that will allow you to have either a slight…

You'll want to use the Roadmaster #RM-1139-176. This part will replace the existing sway bar, but will reuse the factory hardware and end links. A rear sway bar is also available as part #RM-1139-147.

You can replace the front sway bar only on your motorhome with a 2017 Ford E-450 chassis, but the best way to enhance the ride of your motorhome is to add an aftermarket rear anti-sway bar, which are superior to OEM sway bars. After that you can…

I recommend starting with the Roadmaster Rear Anti-Sway Bar, #RM-1139-147. This will reduce side-to-side movement for a noticeable improvement in your vehicle's stability and reduced body roll. For the front, I recommend the Timbren Front…

When Roadmaster refers to a 10 and a 14 mm bolt, they're referring to the diameter of the threaded portion of the bolt, not the size of the bolt head or the size wrench needed to install or remove the bolt. If you measure the diameter of the…