RoadMaster Falcon Tow Bar Installation - 2021 Jeep Wrangler Unlimited Video

We have the Roadmaster Battery Charge Line kit part #RM-156-25 which comes with everything you'd need to run a charge wire from your tow vehicle to your Jeep Wrangler getting flat towed.

The Roadmaster Battery Charge Line Kit for Towed Vehicles #RM-156-25 has a circuit breaker to help isolate that circuit from issues, but it will not prevent back-feeding. If you want to prevent back-feeding which isn't typically an issue, you…

I checked with Roadmaster to verify the inner diameter without the adapter ring of the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motorhome Mount Tow Bars - 3/4" Thick #RM-035, and it is 1-1/2 inches. I have added a link to a…

I do have an installation video of base plates being install on a 2020 Jeep Wrangler Unlimited which I have attached for you. However, we have not yet had the opportunity to install the Roadmaster Direct-Connect Base Plate Kit part #RM-521453-5 on…

To flat tow your Jeep Wrangler JK behind your motorhome, you will need a base plate kit, tow bar, safety cables, tail light wiring harness, and a supplemental braking system. Depending on the year of your Wrangler, you may also need a Brake-Lite…

The Roadmaster Charge Kit part #RM-156-25 is designed to tap into the 12 volt power circuit that's carried from the tow vehicle to the towed vehicle through the wiring used for the lighting. If the trailer wiring at the rear of your 2013 Thor…

The center pin of a 6-way is typically the 12 volt accessory circuit which is commonly used for charging batteries. The same 12 volt pin on a 7-way is the one in the 1:00 position. Between the two connectors styles those are the correct pins to use.

To connect your Blue Ox tow bar, such as their Alpha #BX7380, to your Wrangler Unlimited's towing bumper's 1-inch D-rings you will want adapter kit #BX88358. This includes the 7/8-inch pins and retaining clips. You can see how this installs…

There is an attachment available for your d-rings on your Jeep Wrangler. If you have 1 inch D-ring bumper mounts, then you will want the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick #RM-035-1. If you…

When looking at the front of the socket of the #BLU63XR, wire the 4-way round socket as follows - Top Left - Left stop/turn, yellow wire Top Right - Right stop/turn, green wire Bottom Left - Ground, white wire Bottom Right - Tail Lights, brown wire I…

The safety cables like #RM-643 would attach to the portion of the quick disconnect that bolts directly to the #1418-3 base plate, as shown in the provided photo. I've linked you to a help article that provide a basic rundown of what's needed…

If the D-ring bumper mounts on the Rock Crawler bumper are 3/4 inches then the Roadmaster adapters, part #RM-035, will work on the bumper. If the mounts are 1 inch then instead part #RM-035-1 is the correct size. However, neither are compatible with…