Roadmaster Base Plate Installation - 2015 GMC Acadia Video

There are a few differences between the Demco Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor #DM86VR and the Roadmaster InvisiBrake Supplemental Braking System #RM-8700. The biggest difference between the two is…

The bulb and socket kit, #RM-155, does fit the 2012 Buick Enclave. Wire length could be an issue on any vehicle. It all depends on how the wires are routed under the vehicle. Normally, unless it is a truck, the wire length is more than enough. Bulb…

To connect your Blue Ox Avail Tow Bar #BX7420 to the Roadmaster EZ Crossbar Style Base Plate Kit #523149-1 you'll need the Roadmaster Tow Bar Adapter #RM-032. I've attached a short video below that will show you how to connect the adapter to…

The base plate kit that your 2015 Chevy Traverse requires is the Roadmaster part #523175-4 that you mentioned. This will work well with the Stowmaster Tow Bar part #RM-501. For safety cables you can use #RM-643. The coiled design helps keep the…

Based on my research it looks like your 2016 Chevy Traverse can weigh between 4,713 to 4,956 pounds depending on the exact model. The highest rated tow dolly we have available is the Demco Kar Kaddy #DM9713045 that can handle a vehicle that weighs up…

For your 2016 GMC Acadia we have all the parts needed to flat tow it behind your motorhome. You would need to start with a base plate kit though. For that you would need the part #523149-1 which is a confirmed fit. These kits aren't incredibly…

Yes, the setup you mentioned is complete for flat towing your 2013 GMC Acadia. The base plate kit part #BX1708 is a confirmed fit and will work great with the Blue Ox Avail #BX7420 tow bar that you mentioned. This is the nicest tow bar around so…

Both bypass switches are needed in order for you to flat tow your 2016 Chevrolet Traverse; the reason for that is because they are different types of fuses (at different locations, as you pointed out), so both switches are needed, the Roadmaster…

Our etrailer baseplates are made by Demco so you'd just need the Demco Tabless Base Plate Kit #DM99YV for the 2017 GMC Acadia. This would be compatible with the etrailer XHD Non-Binding Tow Bar #e94ZR so that you could use it with both the F-150…

I wish we did! But at this time we do not. I attached a link to a set of very detailed instructions though for the #DM9518302 for you to check out as well as an install video for a similar Roadmaster base plate kit part #523149-1 on a 2015 GMC Acadia…

Yes, the etrailer XHD Non-Binding Tow Bar part #e94ZR can be used with Blue Ox base plates if you obtain the Demco Tow Bar Adapter for Blue Ox Base Plates part #DM9523041. This adapter installs on the end of a Demco or etrailer tow bar and allows you…

If you happen to have the Limited model of the 2017 GMC Acadia the base plate kit available at this time is the #523149-1. I have linked the above mentioned product to this page for your viewing and purchasing convenience.