Roadmaster Brake-Lite Relay Kit Installation - 2015 Ford F-150 Video

I recommend The Roadmaster Universal Wiring Kit with Smart Diodes #RO44FR for flat towing your 2023 Ford F-150. The smart diodes in the kit will ensure that your variable voltage, LED tail lights will function as they should while your truck's…

Normally you can find the brake light switch under the dashboard at the top of the brake pedal. There could be a number of wires attached to the switch so you can use a tester like part #PTW2993 to test the wires. Since the auto manufacturers can use…

Yes, you can connect the wiring from the controller that comes with the Demco SBS Stay-IN-Play DUO Supplemental Braking System #SM99251 to the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit #RM-15267 you've installed on your 2014 Fiat…

You will not need additional diodes when installing the Demco SBS Stay-IN-Play DUO Supplemental Braking System #SM99251. The 10 amp diode that come with the kit are only needed if your tow wiring harness is not diode-protected. Since yours is not,…

To flat tow your 2010 Ford F-150 behind an RV, you will need several items. First, Roadmaster Base Plate Kit, #495-1A. I have included installation details below. Next, you will need a tow bar. Take a look at RoadMaster Falcon 2 Tow Bar, #RM-520.…

In order to flat-tow a thirteenth generation (2015-2018) Ford F-150 with all four wheels on the ground behind a motorhome you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and…

Since the SMI Stay-IN-Play DUO Supplemental Braking System #SM99251 uses power from your 2006 Jeep Liberty's battery to engage the compressor, it is possible that the Stay-IN-Play could potentially drain the vehicle's battery over the course…

The 6-way of the Roadmaster Kit part #RM-15267 is designed to allow the pins to connect to up to a 12 gauge wire.

The overall width of the main cross tube on the Buyers Products Class 5 Service Body Hitch Receiver #3371801050, is 44 inches. The square cross tube is 3 inches by 3 inches, and the weld on brackets are 9-1/2 inches tall by 9 inches wide. Check out…

To flat tow your 2013 Ford F-150 Supercrew you will need a tow bar, base plate kit, safety cable set, tow bar wiring, a supplemental braking system, and most likely a high-low adapter. The Tow Bar that I recommend using is the Blue Ox Avail #BX7420…

The Hopkins Tow Bar Lighting Kit part #HM56009 fits all models of the 2015 Ford F-150 so it does work on yours that has BLIS.

Since you have a hard vacuum line on your 21' Ford Expedition you'd want the Demco Vacuum Connection Tee Fitting #DM6257 when installing the Demco Air Force One #SM99209.