Rhino-Rack Aero Roof Rack Installation - 2013 Hyundai Elantra DA126 Video

To install the Sportrack Roof Rack part #SR1010 on your 2013 Honda Civic 4 you will need to use the following dimensions. The front bar scale measurement is 28 inches, the rear bar scale is 26 inches. The placement measurement for the front bar is…

The Curt Trailer Hitch Receiver #C11400 referenced in your question is confirmed to fit the 2013 Hyundai Elantra GT Hatchback. It will use existing holes in the vehicle's frame for a no-drill installation and it does indeed fit models built…

In order to determine if your 2013 Hyundai Elantra GT Hatchback was built in Korea you will want to take a look at the vehicle's VIN. The VIN is usually placed on a metal tag at the bottom of the windshield on the drivers side. If the second…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.