Kuat Hitch Bike Racks Review - 2021 Kia Telluride Video

If you go with the Kuat NV #NV22G then you can add a 2-bike extension later using #NA22G. Or just get them both together using #NV22G-NA22G. Either way will work. The bike stand can go at the end of the NV22G (2-bike mode) or at the end of the…

Yes. The #KU57FR is compatible with the T201B Kuat Transfer V2 1 Bike Platform Rack #KU64FR.

While you could technically slide off the cradles on your Kuat Transfer V2 Bike Rack for 3 Bikes - 2" Hitches #KU24FR and use it as a single bike carrier, how it is not encouraged as it's not going to increase your carrying capacity,…

The 1 Bike Add-On #KU57FR allows you to add an additional bike to the Kuat Transfer V2 Bike Racks 1-Bike #KU64FR, 2-Bike #KU84FR or 3-Bike #KU24FR racks. The 1-Bike Add-On TSAOB is for the previous V1 version of the Kuat Transfer. The mounting…

Yes, the Kuat NV 2.0 series platform bike rack #NV22G-NA22G that you referenced is an add-on type of rack that can be used as either the 2 bike base rack or the 4 bike rack with the extension. The base two bike Kuat NV 2.0 rack is #NV22G. These racks…

The Kuat Single Transfer part #KU64FR would slightly obstruct the view of the backup camera of your 2018 Chevy Volt but for the most part you'd be looking over the top of your bike if it was loaded and through the frame and you'd still be…

When you have a bike rack like the Kuat NV part #NV22G installed in the hitch of a vehicle you greatly limit what can be seen out of a backup camera. Backup sensors can also give false readings as well. The camera should still be able to see through…

The center to center measurement of the mounting bracket bolt-holes for the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR is 5-7/8". Additionally, there are two other bolts holes on the angle brackets that measure 3-1/8"…

For what you are looking for I believe your best option would be the Kuat Transfer 3 part #KU24FR. This is a 3 bike rack that is easy to load, is priced really well for how nice of a rack it is, and for a platform bike that carries more than 2 bikes…

The Curt hitch part #C47JR does not extend out nearly as much as the Draw Tite part #DT84GR that fits your 2021 Volkswagen ID 4. If you were looking for something more recessed you'd want the Curt.

Thanks for reaching out! For your application I recommend checking out the Kuat Transfer V2 Bike Rack for 1 Bike #KU64FR. This is a platform style rack that secures bikes by the wheel and can accommodate up to 60 lbs bikes with a standard 3"…

The Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide #C13704 has brackets that are 10 inches long with mounting holes 8-1/2 inches center on center. The height is right at 5-1/2 inches tall. I've attached a video to…