Hopkins Tail Light Wiring Harness Installation - 2008 Honda CR-V Video

The wires for your Hopkins Custom Tail Light Wiring Kit for Towed Vehicles, #HM56300 is be run under the vehicle. Feed it through frame components as shown in the attached installation video for a 2008 Honda CR-V.

Your 2008 Honda CR-V is a popular vehicle for towing behind a motorhome and we can help you get yours all set with the items needed for safe and legal flat towing. The linked overview article has lots of helpful information and is a great place to…

For your 2000 Holiday Rambler Admiral, I recommend the Tekonsha Prodigy P3 #90195 brake controller. To install this, you can use the wiring harness #3035-P. For most applications, the factory plug is located beneath the dash, near the center console.…

Check the condition of the connection made by the connectors of the Hopkins #HM56300. It sounds like they aren't fully seated which would prevent the CR-V taillight signals from getting to the taillights.

The proper Hopkins tow bar wiring harness for a 2007 Honda CR-V is #HM56300. The one that you referenced is for a Jeep Liberty and will not fit your CR-V. Because this harness wires your Honda CR-V as a combined system, a brake light relay #RM-88400…

We have the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles #HM56300. It is a custom fit wire harness that will work with your 2011 Honda CRV and will sync your lights together.

I believe you are referring to the Roadmaster Blackhawk 2 All-Terrain Tow Bar part #RM-422 which is compatible with the Roadmaster Crossbar-Style Base Plate Kit part #RM-521559-4. However, so long as it is a Roadmaster Tow Bar it can be used with…

The Hopkins Adapter, part #HM47605 is actually a 4-way to 4-way adapter. I pulled the Draw-Tite Mounting Box, part #18159 from our warehouse, and the HM47605. The 18159 has a 2 inch diameter hole, so the HM47605 will not work with this box, but we do…

I have a solution for you, but we do not have a pre-wired adapter to allow you to connect the 6-pin round plug from the tow bar to a 4-pin round plug on your Jeep. One solution is to replace the 4-pin round connector on your jeep with a 6-pin round…

Yes, I will be happy to tell you what you will need to flat tow your 2007 Honda CR-V behind your motorhome. There are 5 major components needed: base plates, tow bar, safety cables, lighting, and supplemental braking. For base plates I recommend…

To flat tow your 2010 Honda CR-V behind a motor home you will need base plates, a tow bar, safety cables, lighting, and supplemental braking. The base plates will provide the proper safe and secure attachment point for the tow bar on your CR-V. The…

We have everything you need. You are looking at five primary components for a safe flat towing setup; a base plate kit, a tow bar, safety cables, tow bar wiring, and a supplemental braking system. - Base Plate, etrailer Invisible Base Plate Kit,…