Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2014 Honda CR-V Video

Honda did not offer a towing package with a 7-way trailer connector for the CR-V, so using a 4-way to 7-way adapter is the best option. You will first want to install a wiring harness with a 4-way connector like part #C56158. This will provide all of…

Yes, you can replace the 2" ball coupler of the StowMaster #RM-501 with the Replacement Coupler Arm Assembly for Roadmaster StowMaster with Lunette Ring #RM-C001890 for a 2-1/2" ID lunette ring.

I did some checking and it looks like your 2016 Honda CR-V has a 1,500 lb towing capacity so as long as you stay under that trailer weight you'd be fine to install a hitch like the #75742 that you referenced. I attached an install video for this…

BMWs and Hondas are very different vehicles so you would need a different hitch for the 2013 Honda CR-V to carry your Thule bike rack. You would want the Draw Tite Hitch part #75742 as this is a 2 inch hitch confirmed to fit your vehicle that would…

For your 2014 Honda CR-V I highly recommend the Curt Class III Trailer Hitch Receiver #C13119 for a couple of reasons. All of the Class III custom hitches (I recommend going with a Class III not only for the extra capacity but for the larger 2"…

The drivers side bolts will not bolt through the appearance panel. There will be an 8-1/2 inch by 4-1/4 inch cutout in the appearance panel for the drivers side bolts. This cutout will give you enough room to bolt the hitch on and leave the…

I'm not sure which year your Honda CR-V is but I saw you looked at the trailer hitch receiver that fits the CR-V from 2012 to 2016 so I checked a manual for the 2016 model. It states, on page 353, that the maximum towing capacity is 1,500 pounds…

We do have a photo of the Curt Hitch, part #C13119, on a 2012 Honda CR-V and I have posted it on the page. The most visible part will be the receiver opening and the front of the round crossbar. I have also linked the installation detail for this…

For your bike rack, I recommend the Lets Go Aero LED Light Kit for GearCage4 and BigBoss Railed Cargo Carriers #H01540. This will easily work with your factory trailer connector. If you don't have the separate 4 way connection, then you can use…

For your 2014 Honda CR-V 2WD, I highly recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #75742. This Class III hitch is confirmed to fit your vehicle and will use existing holes in the CR-V's frame for a no-drill installation. It will…

Using the Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier #H01380 along with the Lets Go Aero Rack-IT #H01199 is a great solution for carrying cargo and bikes. You have the option to add some accessories like a lock #ACC3250, water resistant bag…

The Swagman Bike Cover for RVs - Large - 2 Bikes #S24FR would be a fine choice to protect your e-bike on the Hollywood Racks #HLY64FR bike rack, assuming it's less than 70 inches in length and 52 inches in height. This bag is designed for 2…