etrailer.com Trailer Hitch Installation - 2014 Dodge Ram Pickup Video

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

The etrailer Trailer Hitch Receiver #e98852 comes with the bolts, flange nuts, square spacers and fish wire required to mount this trailer hitch to the frame of your 2003 Dodge Ram pickup. I've linked an installation video for this hitch, as…

I went out to the warehouse to measure the outside diameter of the center of the hub #84546UC3. I used a set of digital dial calipers to take the measurement and came up with 2.6 inches in diameter at the widest point. The pilot hole on your trailer…

Yes we do offer an 8 inch wheel with a larger pilot diameter than the 2.5 inch pilot diameter of the Wheel and Tire Combo part #AM30120 that you initially bought. I checked your order notes and the Kenda 5.70-8 Bias Trailer Tire #AM30130 that you…

The pilot diameter on a wheel, like the one with part #AM30620, is the diameter of the bigger hole that is directly in the middle of the wheel. The pilot hole diameter of the wheel for the part I just measured is 2.84". I have attached a picture…

The pilot diameter of the Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel #AM30120 that you referenced is right at 2.5 inches. As long as the center portion of your hub measures less than that the hub will fit. Basically as long as the pilot…