Curt Trailer Hitch Installation - 2018 Lexus RX 350 L Video

Hey Mark, thanks for the details! The Curt T-Connector #C56217 is actually designed for a Toyota Highlander or a newer model RX350 L which is one reason you're struggling to find the right connector on your 2019 Lexus RX350 L. Since your…

Yes, the Curt Trailer Hitch Receiver #C13394 will fit your 2022 Lexus RX 350 L as long as it doesn't have the Twin-Tip Exhaust. As far as the rear door kick sensor is concerned, we haven't heard anything about that but it…

We do now have one confirmed hitch that fits the 2018 Lexus RX 350L as long as it does not have dual exhaust, the Curt #C13394 which is a Class III hitch rated for 500-lbs of tongue weight and 5000-lbs towing weight. I have attached the…

The Curt Trailer Hitch Receiver #C13394 you mentioned which is the only trailer hitch receiver available for your 2021 Lexus RX 350L can indeed be installed at home as long as you are comfortable this type of work. This hitch is rated at a 5/10…

We do have a hitch that will fit your 2022 Lexus RX 350 with the Curt #C73DR. This hitch will still allow you to use your liftgate sensor, but you will need to kick to either side of the receiver as opposed to just swiping your foot under the bumper.…

I'm not sure what wiring you purchased but if it's anything like the Curt T-Connector #C56217 for a 2021 Lexus RX 350 without the tow package then the system should be working once you get the module and fuse installed. If you aren't…

You are looking for the rear tail light fuse on your 2021 RX 350. The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item #C56217 connects in line with your rear tail lights to power your trailer harness. I have attached a…

I linked the referenced install video below, but it is on a 2017 RX 350. Unfortunately, we have not done an install on a 2021 as of yet so we do not have any videos of the Curt #C56217 being installed on your year. However, I did find that you may…

In order to add a trailer wiring harness to your 2020 Lexus RX 350L you'll want to use the Curt #C56217.

For the Curt T-Connector Vehicle Wiring Harness #C56217 on your 2021 Lexus RX 350L the connectors will be located in a different spot. The 10 pin connector should be located on the passenger side just below the taillight. The 4 pin connector will be…

The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package #56083 requires your 2021 Lexus RX 350 to have the factory tow package which includes a factory installed module to power the trailer lights. Since your harness does not have power I…

If your Lexus RX350 already has the tow package which provides the taillight converter that's plugged into the connector located behind the passenger side cargo area bulkhead as shown in the linked instructions, you'll just need the #118252…