Curt Front Mount Trailer Hitch Installation - 2003 Winnebago Minnie Motorhome Video

The Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" #65001 is a confirmed fit for your 2007 Ford E-450 Cutaway RV Chassis. It is rated for a vertical load of 500 lbs, so you can use it for a motor scooter that is 250 lbs. If your…

I can see why it's a little confusing when trying to find these front hitches for the E series vans. As long as your 1997 SuperDuty Cutaway chassis is the E-350 platform then you can use the Draw-Tite #65001 on your Class C. If you've got the…

I reached out to Draw-Tite and they confirm a fit for the 2007 E-450 Econoline Super Duty RV Chassis. It is the #65001 which will fit 2000-2007 E-450 RV Cutaway Chassis. Curt does not have a confirmed fit for the E-450 but it does mount in the same…

It's possible you might not be trying to install the hitch into the right holes. The cut out portion of the mounting flange of the Curt Front Hitch part #33055 should align with the hump in the frame. However, we had one customer have a similar…

The Reese and Draw-Tite products are manufactured by the same parent company, this means that the #26102 and #26002, Dual Cam Sway Control systems are the same, but there is a difference in the generations of the systems. The older systems had Hanger…

A Kuat NV 2.0 like the part #BA22B can be used in the front hitch of an RV so it will work for you. At the rear of an RV there's a long distance between the rear axle of the vehicle and the rear of it where the hitch is. This causes the ride…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…