CIPA Dual-View Clip-on Towing Mirror Installation - 2016 Kia Sorento Video

There is a kit available for you to wire in your electric brake controller. Since you already have a 4-way as well as the Hopkins Adapter #HM47200 you will need the Wiring Kit for Electric Trailer Brake Controllers #5506; I've added links to…

The Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter #TK24FR will give you the wiring needed to remove a factory 4-way connector and install a 7-way harness. You will need a Mounting Bracket #18138 to attach the 7-way to the…

We do have standard replacement 7-way brackets like with the part #PK12711U.

I do have an option for you but there isn't a plug and play seven way trailer connector option for a 2021 Kia Sorento without the factory tow package therefore no, the Tekonsha OEM Replacement Vehicle Wiring Harness with 7 Way Trailer Connector…

The Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket #PK11893 will use bracket #PK12711U and if you desire a no-drill mount like #18140 or #18136.

For a wiring kit to install the P3 brake controller #90195 to the7-way adapter you would want the Wiring Kit for 2 and 4 Brake Electric Brake Controllers #5506. This will provide the power source and ground for the wiring for the brake controller.…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…