B and W Fifth Wheel Trailer Hitch Installation - 2009 GMC Sierra Video

To safely execute a 90 degree turn you want at least 4 inches of clearance between the truck cab and trailer. The head of the #BWRVK3400-5W is adjustable from front to back so you may be able to adjust it back a little bit for better clearance while…

It seems like you are looking for the best fifth wheel hitch available, and if that is the case the answer is the B&W Companion #BWRVK3400-5W, which would mount in the bed of your 2006 GMC Sierra 2500HD with the Underbed Installation Kit…

The best place to confirm a vehicle's towing capacity is in the owner's manual, since this should reflect the specific complement of equipment installed at the factory, including the rear differential which is just one of the components that…

Since you will be towing, what you will need for your Keystone Cougar 318SAB is a frame-mounted RV hitch, and that is simply going to depend on the width of your trailer frame (the width is measured from inside to inside). After you measure (or if…

There is no difference between the base #BWRVB3405 and the base of the complete hitch #BWRVK3400 (also known as the RVK3405). Are the strips on the bottom of the hitch lined up with the lowest portion of the bed corrugation?

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

Hello Brian. So, the #BWRVB3405 is the part number for the Slider Base for B&W Companion 5th Wheel Hitch. The RVK3405 is the part number for the entire Companion Hitch. So, you would get a complete hitch - base and head unit. Our part number for…

According to the towing guide from the manufacturer that I found online, your truck is rated to tow up to 9,900 lbs total. That means you will be able to tow this trailer, but only with limited additional weight. The maximum loaded weight of the…