Gooseneck Trailer Hitch Installation - 2018 Ram 3500 Video

For your 2014 Ram 3500 you have to install a gooseneck hitch either right above the axle or slightly forward. Gooseneck trailers have very high pin weights relative to bumper pull trailers. If the pin weight is behind the rear axle of the truck it…

You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…

Yes, the Hide-A-Goose Underbed Gooseneck Trailer Hitch item #9466 is compatible with the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter item #RP85FR. It has a 30,000 lbs capacity and locks inside the base similar to other gooseneck…

The factory prep package on a 2018 Ram 3500 is pretty apparent so odds are you don't have this if you are unsure. If the indentations for the four outer pucks and center gooseneck hitch ball are present but there are no actual holes in the truck…

It is certainly possible for the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY58GR to work on your 2020 Ford F-250 Super Duty short bed, but there are likely going to be clearance issues as these are meant for long bed trucks. That…

To replace your factory gooseneck hitch with a B&W Turnoverball gooseneck hitch you would need to remove the factory system underneath, but it is possible. For the correct fit you will want to use the B&W Turnoverball Underbed Gooseneck…

It sounds like you have a Heng's Roof Vent 122112. This is known as the Ventline Old Style Rounded Dome Trailer Roof Vent. Replacement parts are, #BV0554-01 for white or, #BV0554-03 for black. This will be the continuous hinge style. Please…

I recommend the B&W Ball and Safety Chain Kit for Ram Underbed Gooseneck Trailer Hitch part #BWGNXA2062 for the 2019 Ram 3500 prep package because of it's convenient design. The ball is designed with a handle to provide leverage when removing…

Yes, you can install B&W Turnover Ball gooseneck trailer hitch #BWGNRK1314 on your 2018 Ram 3500 with the factory air leveling system. Your truck already has the structure under the bed to add the gooseneck hitch which means this installation…

B and W does have a turnoverball gooseneck hitch that fits your 2010 Dodge Ram 3500 long bed with the part #BWGNRK1308 but the part number you mentioned does not fit. The #BWGNRK1308 does come with everything needed to install on your truck. I…

The Trailer License Plate Mount Bracket, #LP15SB, can be used as an exact replacement for the following parts: Uni Bond #LH1000Z Wesbar #3203 Peterson #B428-09 Bargman #30-72-100 I went out to the warehouse and took some measurements of the bracket…

The B and W Turnoverball that fits your 2014 Ram 2500 is a unique setup that doesn't have a standard center section like other fits. You'd need the part #BWGNRK1384 which instead does not have side rails and is essentially a center section…