Air Lift LoadLifter Air Helper Springs Installation - 2012 Ford F-250 Video

Yes. The AirLift #AL88396 are a confirmed fit on your 2011 Ford F-250 with the OEM Prep package installed; it can also be used with aftermarket 5th wheel and gooseneck systems. I've linked a short review and installation video of these airbags…

Yes, the Air Lift air bag kit part #AL57596 is a confirmed fit for your 2011 Ford F-450 and is perfectly compatible with your B and W Turnoverball gooseneck hitch setup. For a compressor kit then the heavy duty part #AL25854 will work great to…

There is no drilling required to install the TorkLift custom fit camper tie downs #TLF2016 on your 2015 Ford F-250. I have included a link to the installation instructions so you can see the steps required for installation.

I verified with TorkLift for you that the correct tie-downs for your 2012 Ford F-350 Super Duty with an 8 foot bed and factory installed hitch are the following: - Front: TorkLift Custom Frame-Mounted Camper Tie-Downs #TLF2016 - Rear: TorkLift Custom…

The air bags in the Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88396 have a 6" design height. This is the height that the bag is recommended to be when there is no additional weight on the suspension. The additional 1-1/2"…

The TorkLift Tie-Downs #TLF2012 and #TLR3503 are correct for your 2015 Ford F-350 Super Duty with the SuperHitch Original #TLF1002 as long as it's a short bed and you don't have a board or step that runs under the truck bed. These tie-downs…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…