Air Lift LoadLifter 7500 XL Air Helper Springs Installation - 2021 GMC Sierra 2500 Video

We have a set so long as your 2024 GMC 2500HD AT4 isn't the AT4X. Additionally there will be a compatibility issue with the mounting brackets if you do not have the factory puck system. If you're using after market 5th wheel rails the…

Thanks for the picture and congrats on your brand new trailer and truck. We hear this about pushy dealers all the time, I would not buy a Pullrite Slider. I took a look at the nose on 2024 Jayco Eagle 321RSTS 5W and it has a super tapered front end…

Congrats on the new truck! For your 2024 Chevy Silverado 2500 with an 6-3/4' bed and puck system, I recommend the B&W Companion OEM item #BWRVK3775. This hitch installs inside your factory puck system and allows you to have full access to…

To add a 5th wheel hitch to your long bed 2024 GMC Sierra 2500, I recommend the B&W Companion OEM 5th Wheel Hitch item #BWRVK3710 for a 20,000 lbs capacity or item #BWRVK3715 for a 25,000 lbs capacity. These 5th wheel hitches will mount directly…

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

The actual puck itself is a standardized size between each brand so the only measurement that matters is the spacing of the pucks, which differs between each vehicle manufacturer. I've attached a diagram below with the spacings used by…

You do not need a capture plate for the B&W Companion 5th Wheel Trailer Hitch w/ Slider #BWRVK3400-5W, as it is not compatible with the hitch at all. Using the capture plate would make it where the pin box cannot turn, and would make driving…

If you have the longer Lippert Ground Control jack legs you can convert them to the shorter ones like the part #LC342610 for the left side and #LC428493 for the right side.

If you have the Lippert Ground Control 3.0 then your middle jack is either the 17" Tall #LC342610 or the 19" Tall #LC305339. I'm not sure where you would be able to find a part number but if you check out the attached photo you can take…

Lippert does sell the motor separately but unfortunately not the leg unit. If you are needing the leg unit then you will need to purchase the entire rear jack. Thank you for the picture and your description. Between the Replacement #LC305339 and…

The shipping weight of the B&W Companion OEM 5th Wheel Hitch #BWRVK3305 is 152 lbs so it will be just under that after you remove the packaging. Although it is still pretty hefty, the head unit part #BWRVC3006 can easily be removed off of the…

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.