Review of Wheel Masters Wheel Covers - Replacement Jam Nut - WM9072F Video

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I recommend using a cargo carrier that will have enough clearance as you mentioned you need. One of the nice carriers we offer is the Curt 24 x 60 Cargo Carrier, part #C18151. This carrier has a distance of 9 inches from the center of the hitch pin…

For a mounting bracket for the Optronics Trailer Light #MCL75RB that you referenced you would want an Optronics Black Mounting Bracket #A65PB. How it will mount will depend on your trailer, but basically you will need to use a screw or bolt with a…

Yes, both the Optronics lights #MC65RB and MCL75RB use the same mounting base, so the #MCL75RB lights will snap into your old bases. You will then need to wire in the lights, with a power and ground connection. Part #MCL75RB is a sealed LED light…

The black base that the part #MCL75RB attaches to is part #A65PB.

When installing the Optronics Sealed, Thin Line LED Light, #MCL75RB, you will use the #A65PB Bracket for Single Wire Thin Line Light. The bracket has a black wire that the power wire on your trailer will connect. The light will ground to the trailer…

There are five mounting brackets available that fit the Optronics Trailer Clearance Side Marker Light #MC65AB. These three are all black plastic. They are Optronics #A65PBPG, #A65PB and #A65B. The first two come with a single wire, the…

For the clearance light part #AL91RB we have the grommet part #A91GB which is basically a hard rubber.