Review of Timbren Vehicle Suspension - Front Axle Suspension Enhancement - TFF350SDC Video

I spoke with my contact at Timbren and he said the bolt supplied with your Timbren Front Suspension Enhancement System #TFF350SDC that goes from axle to frame should match the OEM bolt. If not, you can use the factory bolt. I have included a link to…

There are front axle Timbrens available for the 2019 Ford F-350 4X4 with part #TFF350SDC. The Timbren Front Suspension Enhancement system will require spacers if you have a suspension lift. If it's a body lift you won't need the spacers. If…

On your 2014 Ford F-350 you can remove the existing factory jounce bumper assembly by grasping it firmly and with a twisting and pulling motion, work it until the jounce bumper pops out of the retaining cup. It can also be pried out of the retaining…

We have two Timbren rear suspension kits that fit your 2020 Ford F-250 we have the standard duty #TFRTT350J which has a spring height of 3-9/16 inch and a bracket height of 2-3/8 inches. The severe duty #TFR250SDJ is 3-5/8 inches tall and has the…

Generally speaking, most leveling kits lift the front of the truck 1-2" to match the rear as the factory ride height on most pickup trucks nowadays is about 2" lower in the front than in the rear. This is usually to compensate for squatting…

The Timbren Rear Suspension Enhancement System #TGMRCK25S is a correct fit for your 2005 Chevrolet Silverado 2500 whether it is a 2WD or a 4WD version. This kit will install without need for the included 7/8-inch thick spacers UNLESS the truck has a…

Yes, you can use the SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SSA25 for your 2017 Ford F-250 Super Duty and they will fit with the top overload springs! Attached is a review video for you to check out.

When installing the shocks of the spring kit part #LC281281 you want to mount the shocks so that they are facing away (and up) from the equalizer of the axle to get the best performance.

Yes, we can definitely set you up with some Timbrens for the front of your 2023 Ford F-350 4WD. I recommend the Timbren #TFF350SDC. These have a 3,000 lb capacity and will help to keep the truck level when you are plowing. They will also absorb shock…

The difference in harshness between the Timbren kits part #TFR350SDF and #TFRTT350F would be very noticeable. Especially when unloaded. Your truck is already going to have a rough ride as that is the nature of 1 ton trucks but the 12k Timbren kit…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The Sundowner 2 horse trailers usually use a weld on square jack. To replace it I recommend the Bulldog Square Jack #BD182304. If you wanted to add a motor to this style of jack, I recommend the Bulldog Powered-Drive Kit for Single-Speed Jacks…