Redline Trailer Suspension SP01-120 Review Video

Finding parts for a trailer that old can certainly be tricky. According to what I can find online, the national 6362 seal has an ID of 1.687" and an OD of 2.627". It looks like they are still out there in circulation, but unfortunately we…

You would need to measure the inside diameter of the hub opening to determine which cap size is needed. You would want to choose a cap whose outside diameter matches the inside diameter of the hub. Some of the most common sizes are 1.980 inch, 1.986…

I spoke with my contact at Curt and he informed me that this Curt Trailer Hitch without the drawbar, part #C45019, weighs approximately 50 pounds.

If the U-bolts are 9/16 inch diameter, the torque specs should be between 65 to 95 foot lbs. If the U-bolts are 3/8 inch diameter, the torque should be between 30 and 50 foot lbs.

Hey Jonathan, thanks for reaching out! The U-Bolts that come in the Crossbars for Malone MicroSport Trailers Kit #MPG4001 have the following specs: - (6) 1.50” x 2” long , 3/8" diameter - (2) 4.50” x 2” long , 3/8" diameter My contact at…

We don't unfortunately, Colby. We do have an extra long bunk kit #CE11416 for the CE Smith Bunk-Style Guide-Ons #CE27660 which will get you a bit closer because it'll work with 3" x 5 1/4" tall frames, but not 6" like…

Yes, my contact at Redline said the nuts that come with the 1-1/2" Square Trailer U-Bolts #SP01-120 should be torqued anywhere between 45-75 ft-lbs.

Based on your trailer tire size the Fulton Trailer Fenders part #F008585-2 would work very well for you. To see a chart with the fender dimensions see the attached picture.

For trailer axle u-bolts like the part #APUBR-10 the torque rating to use is between 45 and 75 ft lbs.

The recommended amount of tire clearance to allow for suspension travel on virtually any trailer is 3" from the top of the tire to the bottom of the fender or frame and 1" from the inside of the tire to the frame. If you need to raise the…

Best option would be the part #CE11416 which was designed to fit a 3 by 5 inch frame. The U-bolts are 6 inches long and have an inner width of 3 inches.

I recommend checking out our single axle trailer fenders part #HP79VR for a plain fender or part #HP97FR for one with a ridged design. These have a backing plate, measure 28" long x 7-3/4" wide x 10" tall, and fit 13" to 14"…